BTech Metallurgical Engineering Course, Top Colleges, Syllabus, Scope and Salary 2020-21

Sakshi Gupta's profile photo

Sakshi Gupta

Content Curator

What is BTech Metallurgical Engineering?

B.Tech Metallurgical Engineering is a 4-year duration undergraduate degree program that offers study on the fundamentals of Metallurgical Engineering principles. The course offers theory and practical study on the science and technology of working and heat-treating metals and altering their physical characteristics.

Candidates are required to study the topics related Physical Metallurgy, Steel Making, Solid State Phase Transformation Process, Physics of Metals, Metal Working Process etc.

To be eligible for this course study, the candidates need to complete their 10+2 level from a recognized board/ council along with Physics, Chemistry and Mathematics as main subjects with at least 55% aggregate score.

Admission to B.Tech Metallurgical Engineering course is mostly done on the basis of national/state-level entrance exams, like JEE Main, WBJEE, MH CET etc. Some reputed colleges and universities also conduct their own entrance exams.

See more: Top BTech Metallurgical Engineering Colleges in India

After qualifying the entrance exam, the candidates have to go through the counselling round. However, few colleges also offer direct admission to this score on the basis of score obtained at the 10+2 level board examination.

Some of the top B.Tech Metallurgical Engineering colleges in India are listed below:

NIRF Rank 2020 College Name Admission Process Course Fee Average Annual Salary
26 Indian Institute of Technology, Varanasi JEE Advanced INR 90,000 INR 14,00,000
50 College of Engineering, Pune MH CET INR 75,000 INR 10,00,000
90 Coimbatore Institute of Technology, Salem TNEA INR 55,000 INR 4,99,000
96 National Institute of Technology, Durgapur JEE Main INR 70,000 INR 8,00,000
101 Kakatiya University, Warangal Merit Based INR 26,650 INR 3,00,000

After completing B.Tech Metallurgical Engineering course, the candidates must have plenty of prospective job and career opportunities. They are basically employed in various fields, like metallurgical and chemical labs, iron and steel companies, hardware companies, airlines companies, railways etc.

They are basically hired as Metallurgy Engineer, Metallurgy Production Manager, Welding Engineer, Project Engineer, Assistant Engineer, Research Assistant, Maintenance Engineer etc.

Such professionals can easily expect an average starting salary typically ranges between INR 3,50,000 to 12,00,000 per annum. This annual salary package may increase on the basis of the students’ skills and expertise in the related field.

See More: All About BTech

There are many options after BTech like MTech or MBA Course. Students who prefer to further their studies related to engineering may continue with MTech. MBA is a prudent option for BTech students who want to enter the job market with high salaries.

Admission Process

BTech Metallurgical Engineering: Admission Process

B.Tech Metallurgical Engineering course admission is widely done on the basis of candidate’s performance in the entrance exam followed by the counselling session. However, few colleges allow direct admission to this course on the basis of merit.

The step-by-step admission process applicable for B.Tech Metallurgical Engineering course is mentioned in the following:

Merit Based Admission

  • The aspiring candidates can easily apply for this course through both online and offline. You can collect the application form directly from the college premises.
  • In case of merit-based admission, the colleges qualify the candidates on their score secured at their 10+2 level.
  • After checking all applications, the college authority will publish a merit list. If you clear the cut-off rank, then you are eligible for admission.

Entrance Exam Based Admission

Most common and popular national-level/state-level entrance exams obtained for B.Tech Metallurgical Engineering course admission are JEE Mains, MH CET, WBJEE etc. However, some institutes also conduct their own set of entrance exams. Here we have to provide the guideline applicable for entrance exam-based admission process:

  • After announcement of the registration dates of the entrance exam, the candidates have to create your own account with some of your basic details, like email id, phone number, password etc.
  • Fill up the application form carefully and must ensure all your details are accurate and correct, otherwise the application will be rejected.
  • Scan and upload all required details, like mark sheets, certificate, id proof, signature, photographs etc. in the specified format as mentioned in the online application portals.
  • During the submission of the application form, you need to pay some minimal application fee through online and offline mode.
  • Once all applicants are judged for eligibility, the college committee will release the admit cards for the eligible candidates. Download the admit card and get a print copy for appearing in the date of examination.
  • Within a few days after the examination, the results will be announced. The qualifying candidates are then switched for the next round, counselling session.
  • During this counselling period, the candidates have to choose the college based on their rankings, verify the documents and pay the course fee for the final admission process.

BTech Metallurgical Engineering: Eligibility Criteria

The eligibility criteria for B.Tech Metallurgical Engineering may differ from one institute to another. To be eligible for B.Tech Metallurgical Engineering course study, the candidates need to fulfill the following minimum eligibility criteria:

  • The aspirants must have cleared their 10+2 level or equivalent examination with Physics, Chemistry and Mathematics as main subjects from a recognized educational board or council.
  • The minimum qualifying aggregate score required in the 10+2 board examination is 55% and above.
  • Candidates having diploma in Metallurgical Engineering, after class 10, can also opt for this course through lateral entry.

BTech Metallurgical Engineering: Entrance Exams

There are a number of entrance exams held every year for getting admission into the B.Tech Metallurgical Engineering program. These entrance exams are held at the national-level, state level or university level. Here we have mentioned a few of the top B.Tech Metallurgical Engineering entrance exams of India

JEE Main: It is a national-level entrance exam organized by the National Testing Agency. This exam is held for admission into various undergraduate engineering degree programs offered by the top-most colleges across India.

JEE Advanced: Another national-level entrance exam and actually the second phase of JEE Main examination. This exam is conducted by the Indian Institute of Technology.

WBJEE: It is a state-level entrance exam conducted by West Bengal Joint Entrance Examinations Board for offering admission to various undergraduate engineering, medical and dental courses offered by the colleges across West Bengal.

MHT CET: It is another state-level entrance examination conducted for getting admission into various engineering, law, health science and management courses offered by various colleges affiliated by the State of Maharashtra.

The dates of application and examination of the above-mentioned entrance exams are tabulated in the following:

Entrance Exam Exam Mode Application Period Exam Date
JEE Main CBT Mode December 16, 2020-January 16, 2021 February 22-26, 2021
JEE Advanced Online 4th week of May-1st week of June, 2021 July 3, 2021
WBJEE Offline October 2020 February 2021
MHT CET Online 2nd week of February-4th week of March, 2021 1st week of May, 2021

BTech Metallurgical Engineering: How to Prepare for Entrance Exams?

For better preparation and to perform well in the entrance examination, the candidates need to follow the below-mentioned tips:

  • While preparing for the test, you should have a clear understanding about the exam syllabus. Download the full syllabus from the official website of the respective colleges.
  • You should have a clear idea about the exam pattern. The entrance exam pattern may change every year.
  • Most of the B.Tech Metallurgical Engineering entrance exams consist of MCQ type questions and have negative markings on wrong answers. So, be careful while answering.
  • Clear up the basics first and then move to the tough chapters. Learn some tricky processes to answer your questions quickly.
  • Prepare a strict time table. Schedule the time-frame for each subject and try to follow them. Must remember that the entire syllabus should be covered once in a year.
  • Regular practice and mock tests enhance your confidence level and help you to perform well in the test. Attempt at least 25-30 mock tests before appearing for the entrance exam.
  • Solve previous year question papers and sample question sets to have a better understanding of the exam pattern.
  • You can follow the most recommended books and take proper coaching, even you can get online classes for preparing well.

See more: BTech Metallurgical Engineering Cutoff

BTech Metallurgical Engineering: How to Get Admission into a Good College?

In order to get admitted into a good B.Tech Metallurgical Engineering college, the candidates need to keep the following pointers in mind:

  • Scroll down the top B.Tech Metallurgical Engineering colleges available in India and make a list of the colleges based on their ease of access, geographical location, course fee etc.
  • Most of the colleges allow admission to this course on the basis of entrance exam performance or based on merit.
  • In case of entrance-based admission, the candidates must have a good score at any national/state-level entrance exam or exams conducted by the college itself.
  • Being well prepared for the entrance exam. Candidates should start preparing for the exam one year before appearing.
  • You can check the course curriculum offered by the colleges of your choice. Must have an updated knowledge about the eligibility criteria and admission process. You can also go through their official website to get more detailed information.
  • Must apply for the course before closing the application window, otherwise the college authority will reject your application.
  • You should have a clear knowledge about the placement scenario of the colleges you are willing to apply to. Must have an idea about the average CTC package offered to the last year candidates.
Course Overview

BTech Metallurgical Engineering: What is it About?

B.Tech Metallurgical Engineering is a 4-year undergraduate degree program that offers in-depth study on the fundamentals of Metallurgical Engineering principles.

  • The course covers study related to mining, extraction, designing and processing of metals. It involves theory and practical study on the science and technology that focus on working and heat-treating metals and alter their physical characteristics.
  • The course offers studies related to the separation of metals from their ores, making and compound of alloys etc.
  • Candidates having interest in various aspects of metallurgy and material science and different scientific principles of fabrication.
  • The students who have extensive knowledge in Physics and Chemistry along with critical analytical skills are perfect for applying to this course.
  • Some of the most popular topics covered in this course study are Physical Metallurgy, Steel Making, Solid State Phase Transformation Process, Physics of Metals, Metal Working Process etc.
Course Highlights

BTech Metallurgical Engineering: Course Highlights

The major highlights of B.Tech Metallurgical Engineering Course are tabulated in the following:

Course Level Undergraduate
Duration 4 Years
Exam Type Semester Type
Eligibility 10+2 level with Physics, Chemistry and Mathematics as main subjects from a recognized board with minimum 55% aggregate score
Admission Process Entrance Exam Based. Merit Based in few cases
Course Fee INR 30,000-2,00,000
Average Starting Salary INR 3,50,000-12,00,000
Job Roles Metallurgy Production Manager, Welding Engineer, Project Engineer, Assistant Engineer, Research Assistant, Maintenance Engineer etc.
Top Recruiting Areas Railways, Metallurgical and Chemical labs, Hardware Companies, Airlines, Iron and steel companies etc.
Top Recruiting Companies Mishra Dhatu Nigam Limited, Hindalco Limited, Hindustan Copper Limited, Tata Iron & Steel Company, SAIL etc.
Why Study?

Why Study BTech Metallurgical Engineering?

Students who wish to build a prosperous career in Metallurgical Engineering with better job options with a secured better annual salary packages, can opt for this course study:

  • Candidates can get a wide range of potential job opportunities in Railways, Metallurgical and Chemical labs, Hardware Companies, Airlines, Iron and steel companies etc.
  • They can easily get hired as a Metallurgy Engineer, Metallurgy Production Manager, Welding Engineer, Project Engineer, Assistant Engineer, Research Assistant, Maintenance Engineer etc.
  • They can also perform research activities in various reputed Metallurgy R&D departments and research labs to perform advanced research activities in the related field.
  • They can also join as a teacher or lecturer in the related field at the top-notch colleges and universities in India.
  • They can also opt for further higher studies like M.Tech, MBA post graduation degree courses.
  • Even they can also opt for lucrative job options in various government sectors by clearing UPSC or IES competitive examination.

BTech Metallurgical Engineering: Course Comparison

B.Tech Metallurgical Engineering and B.Tech Chemical Engineering both are academic and professional courses. Here we provide a comparison study between these two courses based on the major important parameters:

Check out the top B.Tech Chemical Engineering colleges in India

Parameters B.Tech Metallurgical Engineering B.Tech Chemical Engineering
Full Form Bachelor of Technology Metallurgical Engineering Bachelor of Technology Chemical Engineering
Course Level Undergraduate Undergraduate
Duration 4 Years 4 Years
Eligibility 10+2 level with Physics, Chemistry and Mathematics as main subjects from a recognized board with minimum 55% aggregate score Class 12 or equivalent examination with Physics, Chemistry and Mathematics from a recognized university with minimum 50% aggregate score
Admission Process Entrance Exam Based. Merit Based in few cases Entrance Exam. Merit Based in few cases
Course Fee INR 30,000-2,00,000 INR 3,00,000-9,00,000
Average Starting Salary INR 3,50,000-12,00,000 INR 2,50,000-7,00,000
Top Colleges IIT Roorkee, NIT Durgapur, College of Engineering Pune, Kakatiya University, Bengal Engineering College, Coimbatore Institute of Technology, Birsa Institute of Technology etc. IIT Madras, IIT Kharagpur, NIT Trichy, Vellore Institute of Technology, NIT Roorkee, NIT Warangal, IIT Varanasi, IIT Hyderabad etc.
Job Roles Metallurgy Engineer, Metallurgy Production Manager, Welding Engineer, Project Engineer, Assistant Engineer, Research Assistant, Maintenance Engineer etc. Chemical Engineer, Technical Service Engineer, Fire & Safety Officer, Chemical System Coordinator, Chemical Process Engineer etc.
Top Recruiting Areas Railways, Metallurgical and Chemical labs, Hardware Companies, Airlines, Iron and steel companies etc. Educational Institutes, Chemical Industry, Textile Industry, Oil and Gas Industry, Chemical Research labs etc.
Top Recruiting Companies Mishra Dhatu Nigam Limited, Hindalco Limited, Hindustan Copper Limited, Tata Iron & Steel Company, SAIL etc. ONGC, Coal India, Geological Survey of India, HCL, IPCL, NALCO, TISCO, TELCO, Reliance, Neyveli Lignite Corp. etc.
Top Colleges

BTech Metallurgical Engineering: List of Top Colleges

Listed below some of the top-notch colleges in India offering B.Tech Metallurgical Engineering course:

NIRF Rank 2020 College Name Course Fee Average Annual Salary
3 Indian Institute of Technology INR 90,000 INR 16,00,000
9 Indian Institute of Technology INR 90,000 INR 13,00,000
21 Bengal Engineering College INR 1,37,000 INR 3,20,000
24 National Institute of Technology INR 70,000 INR 7,78,000
26 Indian Institute of Technology INR 90,000 INR 14,00,000
46 Birsa Institute of Technology INR 28,000 INR 6,47,000
50 College of Engineering INR 75,000 INR 10,00,000
90 Coimbatore Institute of Technology INR 55,000 INR 4,99,000
91-95 Jain University INR 1,60,000 INR 4,16,000
96 National Institute of Technology INR 70,000 INR 8,00,000
101 Kakatiya University INR 26,650 INR 3,00,000
- Government Engineering College INR 1,500 INR 2,50,000

BTech Metallurgical Engineering: College Comparison

Here we mentioned the basic comparison among the top three B.Tech Metallurgical Engineering colleges in India:

College Name College of Engineering Bengal Engineering College Kakatiya University
Location Pune Howrah Warangal
NIRF Rank 2020 50 21 101
Overview This autonomous institute is affiliated to Savitribai Phule Pune University. The college offers UG, PG, PG Diploma, PhD courses in various disciplines. It is the second oldest engineering college in India. The institute offers 45 UG, PG and PhD courses in Engineering, Management, Science and Architecture disciplines. It is an UGC accredited public university that offers various UG, PG courses in Engineering, Management, Computer Science programs.
Eligibility Passed 10+2 level in Science stream with at least 55% aggregate score 10+2 level board examination with Physics, Chemistry, Mathematics along with minimum 45% aggregate 10+2 level with PCM as main subjects with minimum 50% aggregate marks
Admission Process JEE Main/ MH CET JEE Main Merit Based
Course Fee INR 75,000 INR 1,37,000 INR 26,650
Average Annual Salary INR 10,00,000 INR 3,20,000 INR 3,00,000
Syllabus

BTech Metallurgical Engineering: Syllabus

B.Tech Metallurgical Engineering course syllabus may differ from institute to institute. However, the overall subjects may remain the same.

The semester-wise course breakup for the entire 4 year duration is tabulated in the following:

Semester I Semester II
Chemistry-I Chemistry-II
Computer Programming Mathematics-IIN
Mathematics-IN Strength of Materials
Engineering Mechanics Heat Engineering
Physics-IA Physics-IIA
Semester III Semester IV
Fluid Flow and Heat Transfer Numerical Analysis
Geology and Minerals Beneficiation Material Science
Electrical Technology Thermodynamics of Materials
Mathematics-IIIN Testing of Materials
Engineering Sciences Course Fuels and Combustion
Semester V Semester VI
Deformation and Fracture Behavior of Materials Steel Making
Physical Metallurgy-I Foundry Metallurgy
Iron Making Extraction of Non-ferrous Metals
Chemical Kinetics and Mass Transfer Solid state Phase Transformation Processes
Electro-Chemistry and Corrosion Physics of Metals
Semester VII Semester VIII
Alloy Steel Making and Ferroalloys X-ray Diffraction
Metal Working Processes Industrial Management and Engineering Economics
Material Engineering Metal Joining and Powder Metallurgy
Elective I Elective II
Theory of Metallurgical Processes Advanced Characterization
Light Metals and Alloys Coating Technology
Composite Materials Nanostructured Materials
Books

BTech Metallurgical Engineering: Important Books

Listed below some of the most popular books that helps the students to have a broad understanding in B.Tech Metallurgical Engineering course:

Name of the Book Author
Engineering Materials and Metallurgy R.K. Rajput
Metallurgy of Welding J.F. Lancaster
Physical Metallurgy Prof. Vijendra Singh
Introduction to the Thermodynamics of Materials David Gaskell
Powder Metallurgy Technology G.S. Upadhyaya
Industrial Maintenance and Mechatronics Shawn A. Ballee
Job Profiles

BTech Metallurgical Engineering: Job Profiles

Some of the most common and popular jobs and career options are mentioned in the following with respective job description and average annual salary:

Job Profile Job Description Average Annual Salary
Project Engineer Their main responsibility is to schedule preparation, pre-planning and provide resource forecasting for different engineering and technical activities related to the ongoing project. INR 3,41,900
Research Assistant They actually assist in any kind of academic research performed in various institutes or research labs. INR 3,01,500
Metallurgy Engineer They are responsible for designing metal parts and control processes through which the metals are being shaped. They have to develop the processed metal into various useful applications. INR 3,14,769
Future Scope

BTech Metallurgical Engineering: Future Scope

On successful completion of B.Tech Metallurgical Engineering course, the students who wish to pursue further higher studies instead of being avail job opportunities can opt for the following courses:

M.Tech: Candidates who are willing to continue further higher studies in the same field of education, the students can opt for M.Tech Process Metallurgy course. It is a 2-year postgraduate degree program that helps the students to get advanced knowledge on Metallurgical Engineering aspects.

Also check out the top M.Tech Process Metallurgy colleges in India

MBA: If the student wants to continue their study in the managerial field, then he/she can opt for studying MBA or PGDM degree course. This 2-year management degree program helps the students to get job roles in Managerial Position in any top-notch organizations.

Competitive Exams: After completing this course study, the candidates seek jobs in various government sector jobs. The students need to appear for various competitive examinations, like IES, UPSC to get a high-paid job in reputed government organizations.

FAQs

BTech Metallurgical Engineering: FAQs

Ques. What is the duration of B.Tech Metallurgical Engineering?

Ans. B.Tech Metallurgical Engineering course is a 4-year long undergraduate degree program comprising 8 semesters.

Ques. What is the minimum eligibility criteria for this course study?

Ans. The minimum eligibility criteria applicable for this course study is that the students must have completed their 10+2 level from any recognized board/ council with Physics, Chemistry and Mathematics as main subjects. They must secure a minimum 55% aggregate score at this level.

Ques. What is the admission process?

Ans. Admission to B.Tech Metallurgical Engineering course is mostly done on the basis of entrance exam performance followed by counselling session. However, few colleges offer direct admission on the basis of merit.

Ques. Which are the most popular B.Tech Metallurgical Engineering entrance exams applicable for this course admission?

Ans. Some of the most common yet popular national/state level or university level entrance exams obtained for B.Tech Metallurgical Engineering course admission are JEE Main, JEE Advanced, WBJEE, MHT CET etc.

Ques. Which are the top B.Tech Metallurgical Engineering colleges in India?

Ans. Some of the reputed B.Tech Metallurgical Engineering colleges in India are as follows:

  • Indian Institute of Technology, Roorkee
  • National Institute of Technology, Durgapur
  • College of Engineering, Pune
  • Kakatiya University, Warangal
  • Government Engineering College, Bhuj
  • Bengal Engineering College, Howrah etc.

Ques. What is the average course fee applicable for this course study?

Ans. The average tuition fee charged by the top-most B.Tech Metallurgical Engineering colleges in India typically ranges between INR 30,000-2,00,000 ,based on the type of institute.

Ques. What after B.Tech Metallurgical Engineering course?

Ans. After completing this course study, the students will get employed as a Metallurgy Engineer, Metallurgy Production Manager, Welding Engineer, Project Engineer, Assistant Engineer, Research Assistant, Maintenance Engineer etc.

Ques. What is the average CTC for B.Tech Metallurgical Engineering students?

Ans. B.Tech Metallurgical Engineering degree holders can easily earn an average starting salary of INR 3,50,000-12,00,000 per annum on the basis of their skills and expertise in the related field.

Bachelor of Technology [B.Tech] (Metallurgical Engineering) : 27 answered questions

VIEW ALL

Ques. Which is better, production engineering or metallurgy engineering at PEC Chandigarh?

● Top Answer By Jahnvi Hirandani on 04 May 21

Ans. I have friends studying production engineering at PEC Chandigarh and they have come across that it is somewhat similar to mechanical engineering. You can expect a lot of mechanics and physics, however, some subjects differ as you get into the core. Coming to the question, it totally depends on your pool of interest whether you are into mechanics and production or metallurgy. Here are two major factors you might consider before choosing any of them Production Engineering can get you jobs and packages similar to mechanical engineering. Also, it is a versatile branch where you can learn about manufacturing, operation, maintenance, etc. If you are planning to get into research work after completion of engineering, then you must choose Metallurgy. It has broader research scopes than production engineering. At the end of the day, follow your passion and know where you can invest these 4 years of your life. Nevertheless, if getting a job is your goal then go for production engineering. On the other hand, metallurgy engineering can open doors for good research work if you are interested in doing so.Read more
0
0
1 Answer
●●●

Ques. Which is better, ECE at VIT Vellore or metallurgy at PEC Chandigarh?

● Top Answer By Khushi Sharma on 04 May 21

Ans. My brother had the option of VIT for CSE on merit still he chose PEC metallurgy. There are various reasons as to why he took that decision: VIT is more expensive. Even if he had gone on merit, it would have cost him much more than PEC. Placements in core companies in ECE are negligible. You can sit for IT companies, but they pay less to ECE undergraduates than CSE counterparts. If you are a north Indian, culturally VIT might be different and might take time to adjust. Metallurgy is an undervalued branch in India; many of my seniors are pursuing MS from Germany, the United States, and France, and some have gone to IIMs and FMS with strong credentials. One of our seniors received a PPO of 15 lakhs, which is more than many students from elite branches. You can choose to upgrade, but you'll quickly realize that it's not that simple because the grading criteria favors those who are less deserving (no offense). Whether you accept it or not, those who claim that placement in metallurgy is poor (as it is in all branches except CS/IT) are correct. Placements in the core are hard to come by. Only 4000 people in GATE are from metallurgy, whereas there are 1.8 lakh from CSE and 2.1 lakh from Mechanical, implying that the probability of you getting a PSU is greater than that of a mechanical engineer. Categories ECE at VIT Vellore Metallurgy at PEC Chandigarh Course Fee 7.83 lakh 6.39 lakh Highest CTC 21 LPA 17.75 LPA Average CTC 9.3 LPA 7.5 LPA Recruiting Companies Deloitte, Bank of America, IBM, HCL, etc. ZS Associates, Amazon, JP Morgan, JSW Steels, etc. I personally believe VIT is overrated because a friend who did not even pass mains received 2000 AIR in VITEEE. In the CBSE 2016 boards, he scored 78 percent, which was below average.Read more
0
0
1 Answer
●●●

Ques. Which should I pursue between mechanical at UIET Chandigarh and metallurgical engineering at PEC Chandigarh?

● Top Answer By Shanaya Kapoor on 04 May 21

Ans. Surely, Metallurgy at PEC over Mechanical in UIET. There are various important reasons behind this: Placements in PEC are better, companies like Google, Amazon, Microsoft, etc. visit campus for placements. Though metallurgy has fewer placements than other branches in PEC, once you are in PEC and if you are focused enough, you can go for an upgrade after 1st semester on the basis of CGPA. To aim for it, keep the following things in mind - At most, only the top 10% of the class can be upgraded. The branch you want to be upgraded to will only be available if it has vacant seats. Categories Mechanical Engineering at UIET Chandigarh Metallurgy at PEC Chandigarh Course Fee 82197 (1st year) 6.39 lakh Highest CTC 12.5 LPA 17.75 LPA Average CTC 3.6 LPA 7.5 LPA Recruiting Companies Saint Gobain, ZS Associates, Honeywell, Tata, etc. ZS Associates, Amazon, JP Morgan, JSW Steels, etc. PEC is far superior to UIET in terms of cultural and other extracurricular activities. If you don't have any branch priorities, I'd recommend metallurgy in PEC.Read more
0
0
1 Answer
●●●

Ques. Is it really worth joining Material Sciences and Metallurgy Engineering at PEC, Chandigarh?

● Top Answer By Neelam Shah on 03 May 21

Ans. It depends upon your expectations, your goals, your abilities, etc. The worth of doing Material Sciences and Metallurgy Engineering at PEC Chandigarh will depend on the following factor: If you gave your very best at the entrance exams but still could not score well enough to get a higher rank which would have given you an option for a better college or branch, then probably it is best to move on and choose the branch and the college. There will be opportunities here as well, no doubt about that. If you think you did not give your full efforts and you could do better in the next year, then definitely you should drop a year for better preparation. It is better to drop rather than lamenting in the future that you did not give your 100% and got stuck here. If you prefer engineering and you are passionate about the subject, then the college reputation and brand should not bother you much. It is about the learning you would get and not about other stuff like rankings, placements, etc. You would get plenty of options and opportunities here as well and after graduating too. If placements matter to you more than anything and you do not have any preference about the branch you would get, then definitely you should prefer a college with a better reputation, placements, etc. Categories Metallurgical and Materials Engineering at PEC Chandigarh Course Fee 6.39 lakh Highest CTC 17.75 LPA Average CTC 6-7 LPA Recruiting Companies ZS Associates, Wipro, Capgemini, JP Morgan, etc. PEC Chandigarh is not a bad college and has a legacy of close to 100 years now. It is also ranked 68 in the NIRF 2020 engineering college rankings. Take a decision based on what you want rather than superficial stats and other things.Read more
0
0
1 Answer
●●●

Ques. Should I join metallurgy at PEC chandigarh though I have interest in CSE or should I drop an year to make it to IITS/NITS/BITS?

● Top Answer By Nidhi Goswami on 02 May 21

Ans. If you're are interested in CSE, then you can choose one of the lower-ranked colleges than IITs and NITs or PEC Chandigarh and settle there with CSE course. As college is partly responsible for good placements and career. It mainly depends on your hard work and efforts and your ability to do well in your academics.  You can also take a year drop too, if you don't want to settle in a lower-ranked college, and prepare yourself better for JEE exam and clear out the exam with a much better score and ranking to get selected in CSE course in one of the top engineering institutes of our country.  There is also another option, which is a bit risky and will also require you to do a lot of hard work. This is taking up metallurgy in PEC and then scoring a CGPA of 10 or close to 10 in your first year and then apply for a stream change. But this doesn't guarantee that you will get to change to your preferred stream and you may end up studying metallurgy for the rest of the years.  These are the option you have, now the final decision is yours. Read more
0
0
1 Answer
●●●

Bachelor of Technology [B.Tech] (Metallurgical Engineering) Fee Structure in India


9.10 K (Minimum Fee)PUBLIC COLLEGES5.52 L  (Maximum Fee)
2.22 L (Average Fee)
40 K (Minimum Fee)Private COLLEGES6.40 L (Maximum Fee)
2.49 L (Average Fee)

Reviews

Filter By
CollegesBatch
SORT BY :
Relevance

Indian Institute of Technology - [IIT BHU] (9)
College of Engineering - [COEP] (7)
Birsa Institute of Technology - [BIT] Sindri (4)
National Institute of Technology - [NIT] (4)
Indus University (4)
Amal Jyothi College of Engineering - [AJCE] (2)
JNTUH College of Engineering (1)
Jawaharlal Nehru Technological University - [JNTUH] (1)
National Institute of Technology - [NIT] (1)
Maulana Azad National Institute of Technology - [MANIT] (1)
NIT Trichy (1)
National Institute of Technology - [NITAP] (1)
University College of Engineering, JNTUK (1)
Campus (19)
Placement (18)
Engineering (17)
Fee Structure (16)
Internship (14)
Jee Main (12)
Provide (10)
Cement (8)
Course Curriculum (8)
End Sem (8)
Hostel Room (8)
Semester Exam (8)
Faculty (7)
Branch (6)
Jee Advance (6)

37 Reviews found out of 214890


VD
9.0 /10

Campus Life :

Annual fests such as Gathering, Regatta, Zest, Impressions, and tech fest such as Mindspark are conducted by the college. There are plenty of books in the library whichever you want you can get there. A sports event called Zest is conducted every year by the college. Clubs such RSC, CST, CSAC, Cultural, Drama, Dance, Science clubs, etc

Placement Experience :

From the 6th semester, students become eligible for the placement. Companies like Microsoft, Wipro, Citi bank, Bajaj, Tata motors, Persistent, Cognizant, etc visit for the placement. The highest package offered goes up to 40 LPA. The percentage of students placed is 80-90 percent.

Course Curriculum Overview :

Good faculty members. Faculties are qualified from reputed universities such as IITs, IISc, etc. There are 2 midterm exams of 20 marks each and one end sem exam of 60 marks per semester. Mid sem exams are easy but end sem exams are tough.

report
Read More
RM
10.0 /10

Campus Life :

There are mainly 3 fests and gathering in COEP. First is Mindspark which is a Tech fest of COEP, then impressions which is a cultural fest of COEP, and last one Zest-it is a sports festival of College of Engineering Pune. Students participate in these events to enhance their public skills. The gathering is organized by the college but all managing committee is comprised of Students and 2-3 faculty mentors. We have a very big College library at COEP. Classrooms are in good condition. COEP is known for its extra curricular activities, there are more than 30 clubs in COEP.

Course Curriculum Overview :

From my childhood, I dreamt to make my career in the research and development field. Metallurgy and materials science is the field where you can see so many opportunities in research areas. And another reason for choosing this college is, I like Metallurgy. Before choosing your branch you must study its curriculum. The faculty is very good at COEP. In my department, there is a total of 30 teachers including research scholars. Most of the facilities are Ph.D. holders. There are 2 tests (known as T1 and T2) and End semester exam.

Placement Experience :

From the 7th semester, students become eligible for campus placements. In one year around 200+ companies visit COEP. For Metallurgy, there are 15-20 companies. The main companies which recruit Metallurgical engineering graduates are Bharat Forge, reliance, Kalyani, Tata Motors, Tata Steel, JSW, Vedanta resources, and many more. In 2020 the highest package was 32 LPA and for Metallurgy it was 10 LPA. If you consider overall college's performance then the placement percentage is 85% and for Metallurgy it's 80%.

report
Read More
JA
7.6 /10

Campus Life :

Great & Splendid & You will definitely like the campus, It has got all facilities, So many programs you can attend, fests, conferences, etc

Placement Experience :

If you have the talent to crack interviews, you will definitely get placed in the college, It has got a good reputation.

Loan/ Scholarship Provisions :

For income certificate people, there will be no tuition fee, for others it 15000/- per year

report
Read More
GK
9.7 /10

Campus Life :

The campus was in 1500 acre land. Well laid out campus with very good road. It was established by Pandit Madan Mohan Malaviya. It had almost all courses in the country. Many of the courses were first started in this campus. It has theaters, hospitals, play grounds, gardens, religious institutions etc.

Course Curriculum Overview :

Very much relevant. It gave me the basic education in the field. I got selected in the prestigious firms like BARC & HAL through tough entrance examinations and interviews. Then grew in the ladder and even became CEO of a company. Any institute or company or place you will get an alumni.

College Events :

Diamond Jubilee Celebration of the prestigious Banarus Hindu UniversityMany International & National Conferences on technical subjected. Almost every monthKashi Yatra is an annual cultural functionUnity in Diversity functionsNational Inter University Athletic Meet.

report
Read More
S
7.0 /10

Campus Life :

The hostel and college buildings have been renovated and more buildings are coming up with modern tech. Wifi is the lacking factor and many students do face this issue. The library is fairl enough with all subject related books one can find there.The sports facilities are okay but the labs are being renovated so may in couple of years yes the lab facilities would be good ones.

Course Curriculum Overview :

The curriculum nowdays is getting upgraded with modern application based subjects and labs too but being a government college the process is a bit on the slower side. Regarding industrial experience yes we had an industrial tour and also had vocational training in some of the best core industries.

Remarks :

Brand value and best and return on investment. It is the best college if one wants to study core engineering branches in Jharkhand. Above all it is easily affordable and students do not have to worry about student loans or anything. Placements have also improved and are on the rise.

report
Read More
S
7.7 /10

College Events :

Our College has 4 flagship events.1) MindSpark: It is the technical festivals of our College. The biggest technical fest of Maharashtra after Techfest. It is a 3 days festival and has a footfall of 150002) Regatta: It is unique boat club festival of our College. It is celebrated on the river which is there in our campus. It includes activities such as Rowing, Telematches, Mashal Dance. It is 92 years old festival of our college.3) Zest: It is the sport Festival of our College. It is the fifth largest sport Festival of India. Various students from all over Maharashtra comes to compete in this fest. 30 different sports are held in this fest. It is a 4 day fest and has a footfall of 12000.4) Impression: It is the Cultural Festival of our College. It is a 3 days fest and has a football of 8000.5) Pune Startup Fest: It is the fest started by E-Cell ( Entrepreneurship Cell ) club in which startup in various fields comes to our College and explain their products to students/ visitors. Investors also comes to this fest and invest in the startups.

Course Curriculum Overview :

My course curriculum is updated.As everyone is moving towards Python for programming language. Our college made Python course compulsory for First Year students.We have maths subject for all the 8 semesters.We also have Biology compulsory for every second year student.We also have subjects Professional Communication, Professional Ethics, Entrepreneurship development, Environmental studies etc.Atul Patil sir the teacher of the course Professional Communication is one of my favourite.

Remarks :

It is the one of the best engineering college in India. And the best engineering college in India.Good Academics.Good CompetitionCET Toppers from Maharashtra comes to this college to pursue engineering.Good Placements record.There are almost 34 clubs in the college which includes technical and non technical clubs.Autonomous College.Extra curricular development.One of the few colleges in India to provide B-tech in Metallurgical Engineering.Therefore I opted for this course.

report
Read More
SG
8.0 /10

Placement Experience :

This college offers several opportunities for its students to get internships at the most reputed companies across India. Almost all students get good placement from almost all branches.The companies get registered at the training and placement department of the college, then the students are informed accordingly for the placement drive, they get trained for the process and then the placement test is conducted by the recruiting company that results in the letter of offers. Companies that usually visit the college campus includes Infosys,Wipro, TCS, L&T, Reliance, Aditya Birla Group, Coal India, SAIL etc.

Course Curriculum Overview :

The B.E. Course at the college is a 8 semester - 4 years degree programme. The fee structure is quite reasonable and is in line with the MHRD Directives. There are several engineering disciplines that comprises of Computers, Electronics, Electrical, Mechanical, Chemical, Metallurgy, Civil, Mining etc. The college has several clubs and organizes several events, conferences, seminars etc. for the students that help them to improve the industry interactions and keep abreast with the latest.

Alumni/Alumna :

There is a dedicated alumni network of the college students on whatsapp, formal and informal. There is a college website which has alumnus section and all alumni are well listed with their whereabouts for help of all the current and passed out students for all needs and supports.The alumni also funds the needy alumnus in case of any emergency issues in terms of medical or otherwise. There are several alumnus group across the world based on the regions and locations of the alumni network.

report
Read More
S
8.8 /10

Campus Life :

Campus infrastructure is the best thing about college. The main building was built in 1865 and has black stone structure. The campus is large enough to have seperate building for each department. One of the main features is the library and material in it. Labs are well equipped and there arecmany clubs, groups and teams which work in these labs day and out.

College Events :

Campus life was the best. College has developed a different culture throughout the years. It has around 100 different small, big clubs and groups. They work in variety of fields like technology, art, drama, music, entrepreneurship, etc. It gives the opportunity for overall development of a human.

Course Curriculum Overview :

The syllabus was updated time to time. Tge course included a lot of practical work with time to time visits to the industrial units to demonstrate the actual work going on. Faculties were good but some of them were not up to the standards looking at their teaching skills.

report
Read More
VP
6.3 /10

Admission :

I am Diplo ma student so diploma complete in lakhdhirji engineering college morbi in metallurgy branch so I deside a complete graduation but gavermant sheet is limited and decreases sheet and I am open kategary so not complete in government college so I am administration in Indus college.

Placement Experience :

Indus university in placemats base is very poor bicous not a coming many companies and standard companys. And metallurgy department in not placemants opportunity. The college is not help in placemants only small company placemants.

Course Curriculum Overview :

My course is metallurgy department. Metallurgy diparment is very good. Metallurgycal diparment facultys are very good and freindly so study is easy and any time helt in study and main exam is 40 marks and internal marks is 60.

report
Read More
KK
8.7 /10

Course Curriculum Overview :

Course curriculum is good and includes all the subjects necessary for a metallurgical engineer to study and gain the knowledge along with practical. Exam patter is quite good with 3 exam thouroughout the semester weighing 20 (T1 after 1 month), 20 (T2 after 1 month of T1) & 60 marks final exam at the end of the semester

Campus Life :

Campus life is pretty cool as it is one of the olded institute in Asian continent after IIT Guindey and IIT Roorkee. In CoEP, seniors treats junior as friend with absolute no ragging. College management always take care of the Gender equality and no sexual harassment is acceptable under any case.

Faculty :

Nearabout 15 lecturers are in Metallurgical engineering department out of which mostly are PhD faculty with vast knowledge in respective field with average age 35 years. Along with the lecturers, 5-6 lab assistants are also working with knowledge of instruments available in lab.

report
Read More
Ks
5.0 /10

Campus Life :

Campus is good. You will get a lot of time to do extra things. Labs are good too. Gender ratio is poor will approx 10:2. Other activities are not that good and competition are sometimes 'fixed'. Ypu can play inside hostel by contributing your extra money to get stuffs like ball bat or anything. To play in ground you have to be in touch with 2nd year or seniors as juniors are not allowed to play or they will face ragging.

Remarks :

They do very less to remove ragging. Literally everyday seniors call juniors to their hostel and make them do different things. Administration is very very poor and this year there was a lot of trouble in counseling process. I see my friend in poor college then this but they have better management.

Fee Structure And Facilities :

Its feasible. For general students its 51000 per year for OBCs its approx 33000 and for ST and SC its 21000. For girls it's very less and tuition fee is 32. There are various categories and fees are according to that. But overall it's a decent or cheap college to study.

report
Read More
SP
9.3 /10

Admission :

I passed 12th in surat, I am studed in pp siwan chaitanya Vidya sankul abrama Surat.after I getting a result I found a big and professional course of engineering then I find my college as Indus University and it is more important for metallurgical engineering because it is number one college fro metallurgical engineering then I referred Acpc for admission.

Fee Structure And Facilities :

I am Indus University student.indus University charge a fees for one year is 90000(tution fees)&4000(exam or cultural fees). In fees we get a one one student kit like a stationery materials and ID card of Indus University. So my point of view it is a fashionable fee structure of us.

Alumni/Alumna :

I am a student of University. Our senior and super senior are most informative and helpful.so we have a big support of our metallurgical engineering department senior as well as super senior. Metallurgical department senior and super senior have a placement in different industry.

report
Read More
CS
8.3 /10

Campus Life :

Campus life is good, it is much greener than the city outiside campus, also there is less traffic inside campus.Gender ratio in my branch is around 1:9 but it is increasing every year because of government reservation of girls. There are multiple events in every field takes place throughout the year. Also, many renowed persons visits campus and share their ideas, organises workshops to sharpen students skills.

Remarks :

Indian Institute of Technology BHU is one of the finest colleges in India with great alumni network and have good research, placements and internship drives. It will completely change you after graduation. Some bad things about college is that it has old infrastructure (but now slowly it is improving), some hostels are around 100 years. old which some students dont looe to live in but they have to.

Placement Experience :

Placement and internship of Indian Institute of Technology BHU are good and most of the students who apply for placements are placed. Manny companies started visiting around 1st August and ends till end of nov. and then again from Jan to March in next semester (same for internships). Companies:- Google, Amazon, GS etc. for non core and Tata Steel, HZL etc. for core Metallurgical companies.

report
Read More
PS
6.5 /10

Alumni/Alumna :

Yes they are very helpful for us during this work ln the jawaharlal Nehru technology kakinada-university college of engineering more helpful we are getting from our seniors only and they are also help us to settle in the different companies

Faculty :

We had best faculty in the college especially in our metallurgical engineering branch. We have faculty members which are worked from different reputated companies as cheifs and managers and directors though there was most efficient teaching

Course Curriculum Overview :

It is different from all other courses that is i had taken metallurgical engineering branch. It has more opportunities for getting job when compared to the other engineering branches. There had more opportunities towards government

report
Read More
AC
8.2 /10

Campus Life :

As the hostels are govered by Revenat fathers as wardens, they are strict and parties or such items doesn't take place, eventhough religious ocassions are very much celebrated. Our college provides Bachelor's for 7 different courses and each department hosts their own workshops and events in which every student gets the opportunity to participate. There are no discrimination on the basis of genders on any a Other sorts. The college have a good amount and is highly economic.

Course Curriculum Overview :

We have exams after the end of each semester, and exams are to be written in 3 hours. Lab exams are conducted at the end of the sem after completion of the experiments. We have a total of 6 subjects out of 150 marks each (50 internal). Internal marks are on the basis of the marks obtained in the series exams, and the punctuality in submitting assignments. The theory paper is on 100 marks, and requires a minimum of 45 marks for passing excluding the internal marks.

College Events :

The cultural and technical fest of our College is known as Azure, it is conducted at different times, one in tge odd sem and other on the even or according to the time provided. Our college also conducts an intercollege Basketball competition called Arena in which different colleges from various districts take part. Also last year an IEDC summit was also conducted at our college.

report
Read More
BG
8.5 /10

Placement Experience :

The college has a centralized placement cell and there are companies right from Amazon, Google, E-bay, Goldman Sachs, Credit Suisse, D. E. Shaw, IBM to Bajaj, John Deere, Hyundai, Tata Steel, Kirloskar, JSW giving offers. The companies in which people from my branch were placed are Kirloskar, JSW, Alfa Laval, Hindalco, etc. Some of the branches like Production, Metallurgy have compulsory internship credit and the college gives a support to get through the internship process. The college holds the reputation of 100% placement. There is a mock test taken before the placement starts which helps the students in preparation. The recruitment drive is generally test, GD, PI each being an eliminative process.

Admission :

I have done my 12th std in PCM group and written the MH-CET entrance exam. I had gotten a score of 147 so I had an option of Metallurgy as a branch. I opted for this college because this is one of the best colleges in India and the best autonomous college in Maharashtra. You get to mingle with the best brains of the state and along with it, you have so many extra curricular activities to do. Also, the location has an added advantage of the proximity to the industrial area. The college has a good library and a cheap but a good hostel facility. It also offers great placements. Once you go through the entrance exam and get your results, CAP rounds are conducted by DTE for admission.

Course Curriculum Overview :

The learning is pretty application based and the courses are industry relevant. Many a times there are industry experts for special lectures. You can choose electives of your choice from different branches to have a flair of that subject. You also get to visit industries which is an added advantage. The board of the college is good and strives for continual improvement. e. g I had taken an elective of MATLAB and my lecturer had flown from Canada for that particular subject.

report
Read More
CJ
8.2 /10

Course Curriculum Overview :

I done BTech in metallurgy.It was a rare course due to my academic excellence i got an opportunity to work as project intern in IIT Bombay during my final year.During college days it's very difficult to find money for paying hostel facility.For finding money off time i went as driver.

Admission :

The government of Kerala will conduct a entrance exam called KEAM.Based on the Rank list of KEAM admission process will start.First it's very difficult for join because of the financial condition.Due to the high rank in entrance government offered me a scholarship of 5 lakh.

College Events :

Azure 2019 is agreat event conducted it was of 15 lakh project.I was the co ordinater for that program.The program was inaugurated by famous malayalam actor and national award winner Sri salikumar.Students and faculties congraluted me conducting this program sucessful

report
Read More
JB
7.5 /10

Campus Life :

Cultural fest are held every year in the month of November where students showcase their talent on stages. Along with a celebrity performance to close the curtains to the 3 day cultural fest. Technical fest is also held in the month of February. With different segments providing right exposure to students. Sports event is help in every year March. With different sports like, cricket, football, volleyball, athletics

College Events :

Bitaansh: Annual cultural fest of the college which include freshers cum farewell. In this segment, fresher of the year is selected through rigourous rounds. To draw curtains to the 3- day event, celebrity performance is kept on the last day. Technical fest: It comprises of technical paper presentation, bot fight and many technical based segments.

Placement Experience :

As the it is the only govt college in the state, the placement is kept up to the mark. Many companies like TATA Steel, Vedanta, Jindal steels, TCS, Wipro etc visit college for placement of students from final year. Tata steel also provide internship to students of pre-final year with a stipend of 10k per month.

report
Read More
Ak
9.8 /10

Placement Experience :

The placement percentage are greater than 90% and approximately all students got job from this college and also this college provide internship opportunity to the student.For internship process firstly to clear the test exam and after the clearing exam you are eligible for interview round and after the interview you got the internship on the basis of interview.

Campus Life :

There are many clubs and council for the extracurricular activities for dancing there are dancing club which guide you and teach you dancing.if you are interested in robotics,coding,aeromodelling and finance then you learn easily by the joining the club. There are many sports ground for the sports approximately all sports are here you can join any and play.

Fee Structure And Facilities :

On the basis of family income if your family income is less tha. 1 lakhs per year then you got 100% off on tution fee.if your family income is less than 5lakhs and greater than 1 lakhs then you have to pay 1/3 of tution fee and if your family income is greater than 5 lakhs then you have to pay full tution fee.

report
Read More
VP
6.3 /10

Admission :

I am Diplo ma student so diploma complete in lakhdhirji engineering college morbi in metallurgy branch so I deside a complete graduation but gavermant sheet is limited and decreases sheet and I am open kategary so not complete in government college so I am administration in Indus college.

Placement Experience :

Indus university in placemats base is very poor bicous not a coming many companies and standard companys. And metallurgy department in not placemants opportunity. The college is not help in placemants only small company placemants.

Course Curriculum Overview :

My course is metallurgy department. Metallurgy diparment is very good. Metallurgycal diparment facultys are very good and freindly so study is easy and any time helt in study and main exam is 40 marks and internal marks is 60.

report
Read More
Load more reviews

Comments



NO COMMENTS TO SHOW

Bachelor of Technology [B.Tech] (Metallurgical Engineering) Colleges IN INDIA

View All
84.98 K first year fees
VIEW ALL COURSES & FEES
12.5 K first year fees
VIEW ALL COURSES & FEES
40.5 K first year fees
VIEW ALL COURSES & FEES
1.38 L first year fees
VIEW ALL COURSES & FEES
CMJ University
Ri-Bhoi, Meghalaya
UGC
3.75 L Total fees
VIEW ALL COURSES & FEES
Ranchi University
Ranchi, Jharkhand
UGC
2.35 K first year fees
VIEW ALL COURSES & FEES
20.36 K first year fees
VIEW ALL COURSES & FEES