Master of Engineering Civil Engineering Top Colleges, Syllabus, Scope and Salary

Pranjal Singhal's profile photo

Pranjal Singhal

Content Curator

Master of Engineering (ME) in Civil Engineering is a Post Graduate (PG) course in the domain of engineering with a specialization in the field of Civil engineering. The course is of 2 year duration divided into four semesters

Some of the popular colleges offering the course are:

The fee for the course varies between INR 50,000 to INR 2, 50,000 in India. The variation in fee is based on the location and nature of university (that is government, state/private/deemed etc.).

Admissions to the course involve both Common Entrance Test (CET) based selection method as well as merit-based selection criteria that is the percentage of marks obtained at Under Graduate (UG) level. Most of the colleges who provide admissions through CET mechanism rely on the score of All India level common entrance exams like GATE (Graduate Aptitude Test for Engineering) while a select few opt for a separate entrance exam of their own.

A minimum of 50% (relaxable for reserved category candidates) marks at UG level is the least which almost all the institutes desire from applying candidates (in the form of eligibility criterion).

The course is aimed at providing domain-specific skills and knowledge to the master’s level students so as to equip them with a holistic knowledge of the subject that will enable them to persecute the learning in the practical sense.

Post Graduates in Civil Engineering have a wide range of job opportunities like Construction engineer, water resource manager, structural engineer, quantity surveyor etc. Once completed, post-graduation one may pursue further studies like M.Phil and Ph.D. in the said subject or may take up job opportunities associated. The average salary ranges between Rs.15000 and 20000 a month.

M.E. in Civil Engineering: Course Highlights Table

Course Level Post Graduate
Duration of the Course 2 years
Examination Type Semester
Eligibility Minimum score of 50% (Relaxable for reserved category students) marks at UG level in any stream.
Admission Process Entrance exam based/Merit-based
Course Fee Between INR 50,000 to 2.5 Lacs
Average Starting Salary INR 15000 to 20000
Top Recruiting Companies Building and Construction, Public infrastructure development, water resource management, material strength analysis, surveying
Job Positions Construction engineer, Structural engineer, Water resource manager, quantity surveyor.

M.E. in Civil Engineering: What is it about?

M.E. in Civil Engineering course in the subject is designed to provide a professional outlook to the students in regards to this oldest domain of engineering. Through practical and analytical approach students are taught about each and every aspect of the respective domain such as design, construction, and maintenance. The knowledge and skill base is tuned in such a manner that the students are able to cope up with any challenge that may come during execution of their skills in practicality.

Civil engineering postgraduates would be involved in the construction of critical infrastructures like roads, bridges, flyovers, residential buildings etc. hence it is necessary that they are trained to be sound both academically and practically. The course aims at building that caliber among students that they would require in the real-life practical environment.

M.E. in Civil Engineering: Top Institutes

A significant number of colleges across the country offer the M.E. in Civil Engineering course to candidates who have passed their UG or equivalent examination from a recognized state or central University. For your reference, we have tabled down a list of various colleges/universities that are offering this course in India.

Institute City Average Fee
IIT Delhi INR 81,000
Coimbatore Institute of Technology Coimbatore INR 127,575
Birla Institute of Technology Ranchi INR 1,87,000
Deccan College of Engineering and Technology Hyderabad INR 48,500
Delhi Technological University Delhi INR 1,44,000
Dr. DY Patil Institute of Engineering and Technology Pune INR 85,000
Flora Institute of Technology Pune INR 78,000
Government Engineering College Aurangabad INR 64,171
Gujarat Technological University Ahmadabad INR 90, 000
Himalayan University Itanagar INR 42,000

M.E. in Civil Engineering: Eligibility

Candidate must have passed the B.E/B.Tech or equivalent examination in the respective stream from a recognized state/private/deemed or central University with at least 50% (40% to 45% for reserved category candidates) marks.

  • He/She shall not be having any backlog or compartment in any of the subject/Subjects at UG level that is yet to be cleared at the time of taking admissions.
  • Apart from the above-mentioned eligibility criteria’s various colleges and institutes have their own additional criteria’s which the students would have to satisfy in order to take admission.
  • In case of reserved category students, they would have to present their reservation certificates issued by the competent authorities in order to avail the benefits applicable to them.

The eligibility criteria’s mentioned above are common to most of the universities and colleges across the country that are offering this course to the students.

M.E. in Civil Engineering: Admission Process

Most of the Universities/Colleges conduct a common entrance test for admission into M.E. courses (like LUPNEST) or take admissions through commonly held entrance exam like GATE.

Students have to qualify these exams (for which they should be eligible to appear) in order to get admission in the course.

  • After the conduct of the test, a merit list of finally qualified candidates is prepared and candidates are invited for admission process by the respective university or college.
  • After admission process final allotment of seats to the candidate takes place and the candidate is asked to deposit the fee for the course and register for the respective academic year.

Admission process would more or less be same across all the colleges and universities that are offering this course.

M.E. in Civil Engineering: Syllabus and Course description

The syllabus of the course is divided into 4 semesters spread over a span of two years with each year comprising of two semesters. The syllabus of the course is divided into various parts and modules that students are taught during the course of their post-graduation. The syllabus covers all the aspects related to civil engineering so as to provide a holistic understanding of the subject to the master’s students.

The details regarding the syllabus of the course are mentioned below for the reference to the candidates.

Semester I Semester II
Building Environment and Services Construction Technique and Equipment
Construction and project management Earthquake resistant design of building
Advance design of concrete structures Low-cost housing
Contracts and Valuation Construction cost Dynamics
Elective subject-I Elective subject-II
Practical Practical
Semester III Semester IV
Seminar 1 Project Stage 1
Seminar 2 Final Project
Project stage I Viva-Voce
Viva-voce -

M.E. in Civil Engineering: Who Should Opt for?

  • Students who have an analytical mindset and like to indulge in problem-solving.
  • Those who have a career in Construction and Maintenance engineering in mind.
  • Those who are looking for a career in Indian Engineering Services in mind.
  • Those aiming at higher studies in the domain can opt for the course.

M.E. in Civil Engineering: Career Prospects

Master of Engineering (ME) in Civil Engineering Postgraduates have plenty of options to choose from in terms of their career. One can choose to work with companies indulged in activities such as building and construction, public infrastructure development, water resource management, material strength analysis, surveying etc.

To provide you a holistic view of the career prospects of the course we have tabled certain areas and the respective roles attached to the same where civil engineering postgraduates can look for in terms of their career.

Master of Engineering [ME] (Civil Engineering) annual salary

Job Profile Job Description Average Salary for Fresher’s
Construction Engineer Work of construction engineer involves responsibilities like the design, management, and supervision related to the construction project. INR 2.8-3 Lacs
Structural Engineer The job involves designing of structures for bridges, buildings, roads, tunnels etc. whereby an engineer is seen in a role of consultants to architects/contractors. INR 2.6-2.8 Lacs
Building Control Surveyor The job involves ensuring that all the regulations and legislative requirements related to the construction projects are followed and everything is perfect in terms of the legality of construction. INR 2.6-3 Lacs
Water resource engineer The job involves taking charge of developing types of equipment and systems for water resource management facilities. INR 2.8-3 lacs
Building Service Engineer This job involves one to deal with the design, installation, and maintenance of all the services that are needed to allow the building to function according to the purpose. INR 3-3.2 lacs

Master of Engineering [ME] (Civil Engineering) : 22 answered questions

VIEW ALL

Ques. How much marks should I score in the BITS-HD exam (M.E. in Civil Engineering) to get an admission to BITS Pilani or Hyderabad campus?

● Top Answer By Mousumi Chatterjee on 14 Jan 21

Ans. The cutoff for BITS- HD is not fixed. It changes on a yearly basis depending on the difficulty level of the question paper. Both BITS Pilani and Hyderabad campus considers GATE scores too for admission. This makes the cutoff unpredictable since most of the top students can take admission through Gate leaving some space for BITS HD score. However, the previous year’s cutoff was 150 by 300 in civil structural engineering that could be considered a safe test score but depends completely on the competition of that year. The table below shows the cutoff of the last five years for Civil Engineering in BITS HD. Year Cutoff 2019 269 2018 274 2017 294 2016 314 2015 312 Last year the cut off for 150 but that will not remain fixed since it will change again in the coming next year. That depends completely upon the competition and the competitors. In the year 2018 BITS decided to take admission based upon the GATE scores as well as the BITS HD exam. So, it is hard to predict how many marks you should score to secure admission to the Civil Structure branch at BITS campuses.Read more
0
0
1 Answer
●●●

Ques. How is NIT Srinagar for an M.Tech degree in civil engineering?

● Top Answer By Supriya Sarkar on 04 Nov 20

Ans. National Institute of Technology (NIT), Srinagar is one of the oldest NITs. It has been ranked 67 by NIRF,2020. It has received grade A by NAAC. Course Information: The M.Tech in civil engineering from the National Institute of Technology (NIT), Srinagar is a 2-year post-graduation full-time course. The fees for the course are around 2 lakhs(approximately). The course provides specialization in structural and geotechnical engineering, transportation engineering, water resource engineering, and planning. To get admission a student should score a minimum of 60% in graduation. Students are also required to have a valid GATE score. According to the 2019 data the required cutoff was as follows. Structural Engineering 581 Geotechnical Engineering 585 Transportation Engineering & Planning 544 Water Resource Engineering 526 Faculty and Academics The faculty is well qualified, reputed, and has experience in diverse fields. Teachers are supportive and helpful. They encourage students to take up internships to gain practical exposure. The teachers themselves take the initiative to help students get good internships. Research work is considered important. Various industrial visits are organized for the students. Seminars and workshops are also organized. Facilities: The labs for students are well equipped with the latest technology and tools. The library is well stocked with the latest publications, journals, and books. High-speed Wi-Fi is available all over the campus. Placements: Campus placement opportunities are less for MTech Civil as compared to branches like Communication and Information Technology. Some good companies do come to hire students but only a small proportion get jobs. Companies like IISC Bangalore, NTPC, ABB, L&T InfoTech hire students. Other students need to seek jobs themselves by applying at various companies off-campus. The average CTC offered in the 2020 placement drive was around 9 LPA. Whereas, the highest package went up to 19.56 LPA. M.Tech in civil engineering is a good course. Students get a lot of exposure and facilities on campus.Read more
0
0
1 Answer
●●●

Ques. Is NIT Hamirpur a good college for MTech in any specialization of Civil Engineering?

● Top Answer By Ramanpreet Kaur on 30 Oct 20

Ans. NIT Hamirpur has been ranked at 47 for Engineering by Outlook 2019 and is popularly known for its BTech and MTech programs. It is recognized as an institute of national importance and is ranked at 98 across NIT’s in India. Regarding MTech in Civil Engineering, you can find important factors given below: Admissions: Particulars NIT Hamirpur Eligibility criteria Minimum score of 60% in graduation Qualifying Exams GATE Seats 35 Fees 2.12 Lakhs Curriculum: The curriculum is well-planned out with a heightened focus on practical and research-oriented subjects.  Depending on the specialization chosen, students will have the opportunity to learn using practical methods and an efficient approach to industry trends.  It offers a core focus on solving 3D stress analysis problems. Specializations: The institute offers five specializations in the field of MTech civil engineering, which are: Environment, Structures, Geotechnical, Transportation, and Water Resources. Faculty: The faculty members are academic professionals and Ph.D. holders in their respective fields of teaching.  They help guide and train students to gain practical knowledge and adapt to modern industry trends.  They also advise students regarding jobs and placement opportunities. Infrastructure: While the campus is modern and offers well-updated services to students, the practical labs and software are equipped only for a limited number of students.  Apart from that, the institute offers high-speed internet access all across the campus, a sports complex, spacious classrooms, a well-stocked library, and hostel facilities. Placements: The placement rate is 65%. The highest CTC is 15 LPA while the median CTC is 5.3 LPA.  The top recruiters are Accenture and Bloomberg. While there are other institutions that offer comparatively better programs in Civil Engineering, NIT Hamirpur is surely one of the top in terms of curriculum and specialization options, which are offered in very few universities across the country. Students can make an informed choice after doing their research and going through the points mentioned above.Read more
0
0
1 Answer
●●●

Ques. How is doing a master's in civil engineering in Parul University, Vadodara?

● Top Answer By Sudeshna Bhar on 15 Oct 20

Ans. Parul University is a leading private Educational institution of Vadodara which is ranked among Top 100 Engineering colleges in India by Times Engineering Institute Survey 2019. It is approved by AICTE thus guaranteeing students of the most enriching quality learning experience. Parul university provides masters in branches and sub-discipline of civil engineering. Parul University offers two specializations in master's in civil engineering:- Structural Engineering and Geotechnical Engineering. Here are a few highlights of Civil Engineering programs offered by the institute- Admission Criteria: Candidates must have passed a Bachelor's degree or equivalent degree in the relevant field. Minimum Aggregate of 50% following with personal counseling conducted by the university Candidates are selected on basis of merit Faculty: Parul University is a culturally global destination with an elite league of highly qualified and well-experienced faculties from renowned IITs and NITs, along with the industrial experts.  Infrastructure: Parul University has a campus area of 100 acres with a Lush green environment with a magnificent and comprehensive range of facilities within the campus for its students.  The following facilities are provided by Transport, Banking Health Care, Cafeteria, Classrooms, Auditorium, computer centers, and hostel facilities for Students. Placement: Parul University has a placement cell that bridges a gap between students and industry.  There are over 600 recruiters annually that recruits over 1,600+ students. Placement opportunities are provided in almost 160 multinational companies, 310 national companies, and 58 of the most highly innovative startups. The highest package offered at the institute is INR 18 lakhs per annum and an average package of ranging from INR 5 to 6 lacs per annum. Top recruiters include L&T, Tata, Sandvik, John Deere, Reliance, Amazon, Mahindra, HDFC bank, and Alembic pharmaceuticals. The course curriculum of civil engineering of Parul university has been designed in such a way that increases innovations and experiential learning. Civil engineering has more scope than other departments. So go through the information given above and choose according to your convenience.Read more
0
0
1 Answer
●●●

Ques. How is the placement scenario at IIT BHU for M.Tech in civil Engineering?

● Top Answer By Akhil Guska on 14 Oct 20

Ans. Indian Institute of Technology (BHU) is a public engineering university, situated in Varanasi. The institute is built over a massive 1300 acre campus with top-notch facilities It offers an online mode of admission. The institute has tie-ups with the University of Cambridge (UK), University of Oxford (UK), University of Sheffield (UK). IIT BHU has been ranked 10th and 11th in the categories engineering and overall by the NIRF rankings in 2019.  About the Course: The institute offers M.Tech in Civil Engineering as a full-time two-year course at a fee of Rs 53,050 for the full period.  The course has 29 seats available at IIT BHU. Placements Placement rates for civil engineering in most institutes are low, IIT BHU is no different in this respect.  As compared to other branches, the number of companies coming for placements are less.  Top companies for civil include L&T, Indian Oil, and Flipkart.  The median salary at the institute is 8.1 LPA, whilst, the average package is approximately 8.2 LPA. Recruiters from Indian and foreign companies visit the campus for placements. However, civil engineering rarely helps students land good placements as compared to other courses. Still with IIT being a renowned university student bag decent placement offers which average around 8 lakhs per annum, while the highest package may go upwards of 15LPA.  With various international tie-ups, the institute has enhanced its learning experience and placement facilities. If you want good placements, it would be suggested you opt for a different branch of engineering.Read more
0
0
1 Answer
●●●

Master of Engineering [ME] (Civil Engineering) Fee Structure in India


5.40 K (Minimum Fee)PUBLIC COLLEGES2.63 L  (Maximum Fee)
1.06 L (Average Fee)
60 K (Minimum Fee)Private COLLEGES2.60 L (Maximum Fee)
1.54 L (Average Fee)

Master of Engineering [ME] (Civil Engineering) Fee Structure By state


Maharashtra

1.53 LPUBLIC COLLEGES1.62 L
1.57 L
81.40 KPrivate COLLEGES2.60 L
1.73 L

Gujarat

5.40 KPUBLIC COLLEGES6 K
5.70 K
1.27 LPrivate COLLEGES1.90 L
1.66 L

Comments



NO COMMENTS TO SHOW

Master of Engineering [ME] (Civil Engineering) Colleges IN INDIA

View All
Mumbai University - [MU]
Mumbai, Maharashtra
UGC
30 K first year fees
VIEW ALL COURSES & FEES
Jadavpur University - [JU]
Kolkata, West Bengal
NCTE
24 K first year fees
VIEW ALL COURSES & FEES
40.7 K first year fees
VIEW ALL COURSES & FEES
Chandigarh University - [CU]
Chandigarh, Chandigarh
NCTE
80 K first year fees
VIEW ALL COURSES & FEES
1.33 L first year fees
VIEW ALL COURSES & FEES
Osmania University - [OU]
Hyderabad, Telangana
AICTE
37.7 K first year fees
VIEW ALL COURSES & FEES