What is the admission process for B.Tech at BVUCOE Pune 2026?

B.Tech admission at BVUCOE Pune is through two routes. The DTE Maharashtra CAP route uses MHT CET 2026 or JEE Main 2026 scores for merit-based seat allotment. The BVP CET route is for institutional and management quota seats and runs through August 10, 2026. Candidates with MHT CET or JEE Main scores can also apply through the BVP route without a separate BVP CET.

Is BVP CET mandatory for BVUCOE Pune B.Tech admission?

BVP CET is not mandatory if you have a valid MHT CET or JEE Main score. Candidates with MHT CET or JEE Main scores can apply for BVUCOE Pune seats through both DTE Maharashtra CAP and through BVPs own direct route for institutional seats. BVP CET is an additional option for candidates who prefer the direct route.

What is the eligibility for B.Tech at BVUCOE Pune?

Candidates must have passed 10+2 with Physics, Chemistry, and Mathematics with a minimum of 45% aggregate marks (General category) or 40% (OBC, SC, ST). A valid MHT CET 2026, JEE Main 2026, or BVP CET score is required.

Does BVUCOE Pune offer management quota admission?

Yes. BVUCOE Pune fills a portion of its B.Tech and M.Tech seats through institutional and management quota via the BVP CET route. Management quota fees are higher than the general CAP quota fees. The BVP CET 2026 window for direct and management quota seats is open until August 10, 2026. Candidates should contact BVUCOE Pune admissions office for details.

What B.Tech branches are available at BVUCOE Pune?

BVUCOE Pune offers B.Tech in 12 branches: Chemical Engineering, Civil Engineering, Computer Engineering, CSE, CSE (AI), Computer Science and Business Systems, Electrical and Computer Engineering, Electronics and Communication Engineering, Electronics and Telecommunication Engineering, Information Technology, Mechanical Engineering, and Robotics and Automation.

What are the total fees for B.Tech at BVUCOE Pune?

General quota total fees for the four-year B.Tech at BVUCOE Pune range from INR 6,07,740 (Civil, Chemical, Mechanical) to INR 7,29,340 (Electronics branches) to INR 9,03,000 (CSE, IT, and related branches). Robotics and Automation fees are INR 8,50,880. Management quota and NRI quota fees are higher.

What is the M.Tech admission process at BVUCOE Pune?

M.Tech admission at BVUCOE Pune requires a valid GATE 2026 score in the relevant engineering paper. Candidates register for DTE Maharashtra M.Tech CAP, fill BVUCOE Pune as a preferred choice, and receive seat allotment through merit-based rounds. The total M.Tech fee is INR 2,10,000 for most specialisations.

Is hostel available at BVUCOE Pune?

Yes. BVUCOE Pune offers both boys and girls hostel facilities. Boys hostel fees go up to INR 1,38,500 per year. Hostel allotment is typically on a first-come, first-served basis after admission confirmation. Students should inquire with the hostel office at BVUCOE Pune for current availability.

Can diploma holders apply for B.Tech at BVUCOE Pune?

Yes. Diploma holders can apply for direct second-year (lateral) B.Tech entry at BVUCOE Pune. Lateral B.Tech is available in multiple branches. Admission is through DTE Maharashtra lateral entry CAP using diploma marks. Lateral B.Tech total fees range from INR 4,55,805 to INR 6,77,250 depending on the branch.

Bharati Vidyapeeth (Deemed to be University) College of Engineering M.Tech Cad/ Cam: Fees 2026, Course Duration, Dates, Eligibility

Collegedunia Team

Content Curator | Updated 3+ months ago

The M.Tech Computer Aided Design and Computer Aided Manufacturing programme at Bharati Vidyapeeth Deemed University, Pune is a two-year AICTE-approved postgraduate degree delivered at the University College of Engineering, Dhankawadi. The curriculum covers finite element analysis, rapid prototyping, CNC programming, product lifecycle management, and advanced manufacturing simulation using industry-standard software. Positioned within Pune’s automotive and precision engineering hub, the programme prepares graduates for senior design engineering and product development roles at automotive OEMs, aerospace component manufacturers, and industrial machinery firms.

📋 Admission Status: Applications for the 2026-27 batch are currently open at Bharati Vidyapeeth Deemed University, with the application deadline on August 7, 2026 and the BVP CET conducted from February 15 to August 10, 2026.

Key Points

Duration: 2 years (4 semesters), full-time at BVDU Dhankawadi campus, Pune
Total Course Fee: INR 3,34,000 (excluding hostel; annual tuition INR 1,60,000)
Entrance: GATE (Mechanical Engineering) or BVP CET-PG Engineering for 2026-27 admission
Approved by AICTE; BVDU College of Engineering is NAAC-accredited and NBA-accredited
Core subjects: Finite Element Analysis, CNC Programming, Rapid Prototyping, PLM Systems
Placement sectors: automotive OEMs, aerospace component firms, product design companies
PG merit scholarships and Maharashtra government freeships available for eligible candidates

BVDU Pune M.Tech CAD/CAM Fees

Component	Amount (INR)
Tuition Fee (2 years)	INR 3,20,000
Admission and Registration Fee (one time)	INR 5,000
Examination Fee (per semester)	INR 3,500
Caution Deposit (refundable)	INR 2,000
Hostel and Mess (per year, optional)	INR 1,20,000 to INR 1,50,000
Total Fees (Hostel charges separate)	INR 3,34,000

The annual tuition fee is INR 1,60,000, payable in two instalments of INR 80,000 each.
A one time admission and registration fee of INR 5,000 is collected at the time of enrolment.
Tuition fees may see a marginal revision in the second year as per BVDU policy.
Hostel and mess charges are separate and depend on AC or non AC selection at the BVDU Dhankawadi campus.

BVDU Pune M.Tech CAD/CAM Admission 2026

Important Dates

Event	Date
Application Form Release	January 2026
Application Last Date	August 7, 2026
BVP CET Exam Window	February 15 to August 10, 2026
Counselling and Document Verification	May to August 2026
Final Merit List	August 2026
Classes Commence	August 2026

Entrance Exam Dates

Exam	Registration End	Exam Date	Result
GATE	February 7, 2026	August 30 to October 7, 2025	March 19, 2026
BVP CET (M.Tech Engineering)	August 7, 2026	February 15 to August 10, 2026	Within 2 weeks
CUET-PG	January 25, 2026	March 6 to March 27, 2026	April 24, 2026

Candidates can apply through the official BVP CET portal at bvducet.bharatividyapeeth.edu.
Final selection is based on a composite score from GATE or BVP CET-PG, the personal interview, and the marks of the qualifying examination.
The BVDU University College of Engineering, Pune is approved by AICTE and accredited by NAAC and NBA for postgraduate engineering programmes.

The dates mentioned above are tentative and subject to change.

Eligibility Criteria

Candidates must hold a B.E. or B.Tech degree in Mechanical, Production, Manufacturing, or an allied engineering discipline from a recognised university with a minimum of 50 percent aggregate marks.
Candidates with a valid GATE score in Mechanical Engineering (ME) or BVP CET-PG Engineering score are given preference in the merit list.
Final selection rests on the GATE or BVP CET-PG score, the marks of the qualifying examination, and a personal interview at the BVDU Dhankawadi campus.

Admission Process

Register on the BVDU CET portal at bvducet.bharatividyapeeth.edu and complete the online M.Tech application form.
Pay the application fee online and upload B.E. or B.Tech transcripts along with a Statement of Purpose.
Appear for BVP CET-PG Engineering on the scheduled date, or submit a valid GATE scorecard in lieu of the institute test.
Shortlisted candidates are called for a personal interview at the BVDU University College of Engineering, Pune.
Pay the first year tuition fee and complete the enrolment formalities to confirm the seat.
Classes commence in August at the BVDU Dhankawadi campus with research orientation in the first semester.

✓ Opt for this if

Mechanical engineers targeting product design or PLM roles in Pune’s auto cluster
GATE ME qualifiers seeking an affordable AICTE-approved M.Tech near Pune’s industry
Working engineers upgrading skills in digital manufacturing and simulation tools
Those planning careers at automotive OEMs or aerospace component suppliers

✗ Skip if

GATE top-50 ME scorers who can access NIT or IIT M.Tech CAD/CAM seats
Students targeting software or CS-oriented postgraduate programmes
Those needing high research output in manufacturing for PhD applications abroad

BVDU Pune M.Tech CAD/CAM Scholarships 2026

Scholarship	Amount	Eligibility
BVDU PG Merit Scholarship	Up to 25 percent tuition waiver	Top performers in BVP CET or graduation marks
Government Freeship for SC, ST, OBC	Tuition fee reimbursement	As per Maharashtra state norms
EBC Concession (Maharashtra)	Variable	Income certificate within prescribed slab
Sports Achievement Scholarship	Up to 100 percent tuition waiver	National or State level sports achievement
Need based Concession	Up to 25 percent tuition waiver	Based on family income and academic record

PG merit scholarships are linked to first year admission and renewed in the second year subject to CGPA criteria.
Government scholarships and freeships are processed through the Maharashtra DBT portal after admission.
External fellowships such as UGC NET-JRF and ICSSR are channelled through the central research cell.

92 Views Last Year

41 Studentsshown interest in the last 30 days

Official Link:

Go To Website

Bharati Vidyapeeth (Deemed to be University) College of Engineering Latest Updates and News

06 Oct, 2026 GATE 2027 extended registration begins @goaps.iitm.ac.in. The last date to register with a late fee is Oct 12, 2026. GATE 2027 will be held between Feb 6 & 21, 2027. Read News.

Bharati Vidyapeeth (Deemed to be University) College of Engineering: Students' Opinion

AI-Generated Summary based on 1 Reviews

Admission to the M. Tech program at the college is merit-based, with online registration from February to April and the entrance exam held in late May or early June. From the applicants, the top 70 candidates are chosen for 18 seats, with another 70 on a waiting list. Classes start on July 15. Having a valid GATE score is advantageous, offering a 50% reduction in the college's annual tuition fee of 1,00,000 INR.

The exam fee is approximately 12,000 INR annually, and there's a one-time caution deposit of 2,600 INR. The faculty is experienced and supportive, focusing on student development. The college has strong placement opportunities, with top companies in Pune hiring students with at least a 6.5 GPA and no backlogs. Internships, facilitated by the Training and Placement Cell, are crucial, with companies like JCB, Bajaj, and Honda providing opportunities. These internships, though not always stipend-based, generally offer 3,000 to 5,000 INR, providing essential work experience.

While specific scholarship details are not provided, the review indicates that students with strong academics may have scholarship opportunities.

By Collegedunia’s Personal AI

Bharati Vidyapeeth (Deemed to be University) College of Engineering M.Tech Cad/ Cam: Fees 2026, Course Duration, Dates, Eligibility

BVDU Pune M.Tech CAD/CAM Fees

BVDU Pune M.Tech CAD/CAM Admission 2026

Important Dates

Entrance Exam Dates

Eligibility Criteria

Admission Process

BVDU Pune M.Tech CAD/CAM Scholarships 2026

Table of Contents

Bharati Vidyapeeth (Deemed to be University) College of Engineering Latest Updates and News

Bharati Vidyapeeth (Deemed to be University) College of Engineering: Students' Opinion

AI-Generated Summary based on 1 Reviews

BVDU Pune M.Tech CAD/CAM FAQs

Comments

Are You Interested in this College?

SUBSCRIBE TO OUR NEWS LETTER