BEng Mechanical Engineering at Cardiff Uni: Fees 2026 Dates & Requirements

Cardiff University Mechanical Engineering is a three-year, full-time Bachelor of Engineering (BEng) at the Main Site in Cardiff, Wales. Indian applicants typically need 78% to 81% in the best four Standard XII subjects, excluding Hindi and Physical Education, subject to Cardiff’s final equivalency decision. September 2027 tuition is unpublished; 2026/27 tuition was GBP 30,700 (INR 39.35 Lakhs), as a prior-cycle reference.

The course develops mechanical design, thermofluids, solid mechanics, dynamics, control and engineering computing through lectures, laboratories and project work. Accreditation by the Institution of Mechanical Engineers and the Energy Institute supports Incorporated Engineer registration and partly meets the academic requirement for Chartered Engineer registration. It suits applicants who enjoy applied mathematics, hands-on design and collaborative engineering, although the BEng is shorter than Cardiff’s MEng route.

• Cardiff Racing offers a Formula Student setting where students can practise vehicle design, development and testing.
• Students can request a programme switch at the end of Year One in most cases if their engineering focus changes.
• Cardiff provides computers, software, laboratory equipment and safety equipment, so the course lists no specific equipment purchase.

Also Check: Cardiff University Mechanical Engineering Admission

Cardiff Mechanical Engineering Fees and Living Costs 2027

Target-cycle tuition for September 2027 remains unpublished. Cardiff’s live course page says it is awaiting confirmation on 2027/28 overseas fees, so verify the amount before accepting an offer.

Cardiff’s 2026/27 course page listed GBP 30,700 (INR 39.35 Lakhs) per year for overseas students. That annual figure gives a calculated three-year planning total of GBP 92,100 (INR 1.18 Crore), but it is not a 2027/28 quote.

Prior-cycle context: The table below uses 2026/27 figures only to help Indian applicants model the tuition exposure before the target fee is published.

All INR conversions in the article use a conversion rate of GBP 1 = INR 128.16 as of 21 August 2026. Rates fluctuate daily, verify before applying.

Source: Cardiff University Mechanical Engineering course pages; the three-year figure is calculated from the official 2026/27 annual overseas rate.

• Do not treat GBP 30,700 (INR 39.35 Lakhs) as the confirmed 2027/28 charge because Cardiff has not published the target fee.
• Cardiff lists no specific equipment purchase, which reduces the need for a separate initial hardware budget.
• Keep the tuition estimate separate from visa maintenance funds because each figure answers a different funding question.

Cost of Living in Cardiff for Mechanical Engineering Students

Cardiff’s official calculator models an international undergraduate in an en-suite Talybont North room on a 40-week contract covering nine months. The estimate combines accommodation with bills, food, study, leisure, clothing and communications.

The university estimate is a student budget rather than a visa figure, so applicants should compare it with their actual accommodation contract and travel pattern.

Source: Cardiff University Living Costs Calculator; nine-month values are calculated from the official monthly components.

Cardiff’s private-accommodation scenario is GBP 1,125.91 (INR 1.44 Lakhs) monthly and GBP 13,510.92 (INR 17.32 Lakhs) for 52 weeks. The contract length therefore changes the cash requirement materially.

A prior-cycle planning illustration combines GBP 30,700 (INR 39.35 Lakhs) tuition with GBP 11,743.20 (INR 15.05 Lakhs) living costs for one academic year. This is a planning basis, not a target-cycle total.

Repeating those assumptions for three years gives a calculated prior-cycle planning illustration of GBP 127,329.60 (INR 1.63 Crore). It combines GBP 92,100 (INR 1.18 Crore) tuition with GBP 35,229.60 (INR 45.15 Lakhs) living costs.

Read More: UK student accommodation and living costs

ROI reality: The prior-cycle illustration reaches GBP 127,329.60 (INR 1.63 Crore) across three years, so recalculate it when Cardiff publishes the 2027/28 fee.

Cardiff Mechanical Engineering Admission 2027

Mathematics is the key academic requirement. For 2027 entry, Cardiff lists AAB to BBB at A-level with grade B in Mathematics.

The Indian planning reference is 78% to 81% in the best four Standard XII subjects, excluding Hindi and Physical Education. Cardiff makes the final equivalency decision after reviewing the complete qualification record.

The International Baccalaureate Diploma route is 34 to 31 overall or 666 to 665 in three Higher Level subjects, including grade 5 in Higher Level Mathematics. The BTEC route is DD to DM in any subject plus grade B in A-level Mathematics.

Academic Eligibility

The table separates Cardiff’s published 2027 qualification offers from the Indian interpretation used for initial planning. The Indian percentage is an approximate guide and does not replace Cardiff’s formal assessment.

An A in the Extended Project Qualification can lower the offer by one grade, but subject requirements still apply. The route is useful only when the qualification and the required Mathematics grade are both documented.

Cardiff does not publish a course-specific work experience requirement for this BEng. A strong application should instead make Mathematics, design work, laboratory curiosity and engineering problem-solving visible through the academic record and personal statement.

The course is largely core in Years One and Two, then adds optional focus in Year Three. This sequence suits applicants who want a common technical foundation, but module choice can be limited by prerequisites, places and timetable clashes.

English Language Requirements

IELTS means International English Language Testing System, and Cardiff requires 6.5 overall with 5.5 in each subskill. The score therefore needs both the overall band and every component floor.

TOEFL iBT means Test of English as a Foreign Language internet-based test, while PTE Academic means Pearson Test of English Academic. Trinity ISE means Trinity Integrated Skills in English, which offers two accepted component patterns for this course.

The table shows the principal routes for Indian applicants. TOEFL values are shown on the scale displayed by the Mechanical Engineering course page.

The current course page lists TOEFL iBT 90 on the 0 to 120 scale with writing 17, listening 17, reading 18 and speaking 20. Cardiff’s general undergraduate page separately lists 4.5 overall with 4 in each subskill for post-January 2026 tests.

Cardiff has not stated on the course page which TOEFL scale controls this BEng after January 2026. Do not self-convert a post-January 2026 result, and request written confirmation before submitting it.

• Schedule IELTS or PTE preparation early enough to retake a weak component before 13 January 2027.
• Use IELTS when you can reliably reach 6.5 overall with at least 5.5 in every subskill.
• Ask Cardiff to confirm the applicable TOEFL scale before sending a post-January 2026 score.

Tip for Indian students: Secure the Mathematics evidence first because the published offer specifies it, then match the English route to the exact score scale Cardiff confirms.

Cardiff Mechanical Engineering Application 2027

Apply through UCAS using course code H300 and institution code C15. The September 2027 Mechanical Engineering BEng has one listed entry point, Year One at Cardiff’s Main Site.

Completed applications can be submitted from 1 September 2026, with equal consideration by 13 January 2027. Applications after that date may be accepted if places remain, but Cardiff does not guarantee equal consideration.

Application Timeline

The table lists every published 2027 stage for this course and converts timed deadlines to Indian Standard Time (IST). The published UK time controls the UCAS portal.

Indian applicants should submit by the equal-consideration date because the later route carries no equal-consideration guarantee. The university may still close the course once available places are filled.

• Enter course code H300 and Cardiff institution code C15 exactly so the application reaches the correct programme.
• Prepare the Mathematics evidence, Standard XII records and confirmed English result before the January submission.
• Use the course’s design, laboratory and engineering interests to make the personal statement specific to Mechanical Engineering.

The course’s first two years are largely core, so your application should show readiness for sustained Mathematics, mechanics and laboratory learning. Mentioning a particular third-year option is useful only when it follows a genuine preparation or project interest.

Read More: UCAS application guidance for UK universities

Application tip: Use the January route with H300 and C15, and keep the UK deadline visible because UCAS applies the portal cutoff before the Indian conversion.

Cardiff Mechanical Engineering Scholarships 2027

Target-cycle scholarship amounts and deadlines are not confirmed. The latest published references include a self-funded India award and two wider international undergraduate awards, but each needs fresh 2027/28 verification.

The table uses 2026/27 or latest prior-cycle references only. Check the official India scholarship page for the next intake before treating an award as available.

These awards are reductions to the gross tuition only when Cardiff confirms the award and its terms. They should not be treated as a target-cycle remission or deducted from the cost model before selection.

• The India award is the most directly relevant route for an Indian self-funded applicant, but its latest recorded deadline was 31 July 2026 for the prior cycle.
• Automatic consideration removes a separate form only where the published award rules say so, and it does not guarantee selection.
• Keep the 2027/28 tuition model at full cost until Cardiff publishes the award cycle, eligibility and application route.

How to Use Scholarship Evidence

The target fee is unpublished, so a scholarship percentage or prior-cycle amount cannot produce a reliable 2027 net price. Use the awards to identify possible reductions, then request the confirmed amount before finalising education-loan borrowing.

Mechanical Engineering’s professional accreditation and design focus can strengthen a funding statement when the applicant connects the award to engineering preparation, project work and a clear study purpose. The statement should still meet the award’s nationality, fee-status and self-funding conditions.

Read More: UK scholarships and financial support

Scholarship reality: The latest India reference was GBP 5,000 (INR 6.41 Lakhs), and its 31 July 2026 deadline belongs to the prior cycle. Verify a new award before relying on it.

Cardiff Mechanical Engineering Salary 2027

Cardiff does not publish a Mechanical Engineering BEng-only salary or offer rate. The closest official evidence covers other full-time Mechanical Engineering courses at Cardiff, so it indicates subject-level outcomes rather than a guaranteed result for this BEng.

The official Discover Uni Mechanical Engineering data reports earnings, employment and graduate views from wider Cardiff Mechanical Engineering groups. Its course page says the published outcomes are not specific to this course because there is not enough course-level data.

Mechanical Engineering Outcome Evidence

The salary figures below are subject-level Cardiff evidence, not course-cohort results. The 15-month figures use the Graduate Outcomes survey, while the longer-term figures use the Longitudinal Education Outcomes dataset.

Graduate Outcomes data also reports that 90% of the wider subject group was working or studying 15 months after graduation. The result came from 60 students, representing 61% of those asked, and should not be read as a BEng placement rate.

Source: Discover Uni Mechanical Engineering at Cardiff University; salary and employment figures are labelled by their published subject-level scope.

Cardiff describes pathways into product design, automotive, aeronautical, communications, energy, medical engineering and production. These are course-described career areas, not evidence that every graduate enters a named sector.

For this professional course, return on investment (ROI) depends on the confirmed fee, funding, work route and the value of an accredited design education. Because the target tuition is unpublished, a reliable payback period cannot be calculated.

• The prior-cycle tuition was GBP 30,700 (INR 39.35 Lakhs) yearly, so request the 2027/28 quote before committing to borrowing.
• The official nine-month living estimate is GBP 11,743.20 (INR 15.05 Lakhs), so budget housing and living funds separately from tuition.
• The subject-level median is GBP 33,500 (INR 42.93 Lakhs) after 15 months, so treat it as a gross benchmark and not a BEng salary promise.
• The accredited BEng partly meets the academic requirement for Chartered Engineer registration, so compare it with the later learning needed for your intended professional route.
• The 18-month Graduate Route and GBP 41,700 (INR 53.44 Lakhs) threshold make sponsorship and India-return planning necessary before enrolment.

Gross salary is not take-home pay because tax, pension contributions and location alter the result. Use a current UK tax calculator before estimating loan repayment.

ROI reality: The course offers accredited practical preparation, but its 2027 fee is unpublished and its salary evidence is subject-level, so confirm cost and career scope before borrowing.

UK Visa for Cardiff Mechanical Engineering Students 2027

International students use the UK Student visa for this full-time undergraduate course. The current application fee is GBP 558 (INR 71,513). Immigration Health Surcharge (IHS) means the healthcare charge paid with a visa application, and the current IHS rate is GBP 776 (INR 99,452) per year. Check the current UK Student visa rules before applying because government requirements can change.

• The visa maintenance requirement is GBP 1,171 (INR 1.50 Lakhs) monthly for nine months, or GBP 10,539 (INR 13.51 Lakhs), separate from university living costs.
• The 18-month Graduate Route has a fee of GBP 937 (INR 1.20 Lakhs) and an 18-month IHS amount of GBP 1,552.50 (INR 1.99 Lakhs).
• The general Skilled Worker threshold is GBP 41,700 (INR 53.44 Lakhs); standard settlement normally takes five qualifying years, so assess sponsorship before enrolment.
• Students can work up to 20 hours per week during term time, while undergraduate dependants are generally restricted and a government-sponsored exception may apply.

Check Out: UK Student visa requirements and costs

Visa reality: The 18-month Graduate Route is not settlement, so compare the GBP 41,700 (INR 53.44 Lakhs) threshold with sponsorship prospects.

Cardiff Mechanical Engineering Ranking 2027

Cardiff University is placed in the 201-250 band for Engineering in the 2026 Times Higher Education subject ranking. Times Higher Education (THE) means the ranking publisher, and its Engineering table includes mechanical and aerospace engineering among five covered disciplines.

The result is an institution-level subject ranking rather than a Mechanical Engineering BEng ranking. It can provide discipline context, but it does not establish course-specific teaching quality, employment probability or salary.

For an Indian applicant, the ranking is most useful when read with the course’s professional accreditation, laboratory work and individual project. Those course features affect the learning decision more directly than a broad subject band.

Check Out: Cardiff University subject rankings

Honest take: The 201-250 Engineering band confirms subject-level visibility, but accreditation and the 30-credit project are stronger evidence for judging this BEng’s practical fit.