Bachelors Of Engineering [B.Eng] (Automotive Engineering)
Field of Study:
$43,230 /Yr
University of Leeds Bachelor of Engineering in Automotive Engineering is a three-year, full-time on-campus degree in Leeds for September 2027 entry. Indian applicants need Mathematics plus Physics or Chemistry at the required board level, while calculated tuition totals £101,100 (INR 1.29 Crore).
The course progresses from mechanical engineering foundations to vehicle dynamics, propulsion, chassis analysis and an individual engineering project. It best suits quantitatively prepared applicants seeking practical design experience across conventional, electric, hybrid and autonomous vehicle systems.
- IMechE accreditation partially meets the academic requirement for Chartered Engineer registration and identifies the further learning needed after a BEng.
- Students can join Leeds Gryphon Racing and apply classroom design, manufacture and analysis skills through Formula Student activity.
- Optional study abroad or industrial placement routes add one year, while the standard H335 course remains a three-year degree.
Current Admission Status
Applications for the September 2027 intake are Open. International student deadline: 13 January 2027 at 18:00 UK time, or 23:30 IST.
This is the equal-consideration cutoff for a complete UCAS application, including the academic reference. Indian applicants should follow the IST conversion while recognising that UK time controls the portal.
Also Check: University of Leeds BEng admission requirements
Leeds Automotive Engineering BEng Fees and Living Costs 2027
International tuition is £33,700 (INR 42.90 Lakhs) yearly for 2027/28 entry. Leeds states that this international rate remains unchanged throughout the three-year full-time course.
The calculated programme tuition is £101,100 (INR 1.29 Crore), based on three annual payments. This total excludes living expenses, visa charges and costs from any optional extra year.
| Tuition item | Amount in GBP | INR equivalent | Calculation basis |
|---|---|---|---|
| International tuition per year | £33,700 | INR 42.90 Lakhs | Official 2027/28 international course rate |
| Calculated three-year tuition | £101,100 | INR 1.29 Crore | £33,700 multiplied by three years |
All INR conversions in the article use a conversion rate of GBP 1 = INR 127.29 as of 26 September 2026. Rates fluctuate daily, verify before applying.
Source: University of Leeds 2027 course page; the three-year total is calculated from the published annual international rate.
The fixed international rate limits tuition inflation risk after enrolment. However, applicants still need access to £101,100 (INR 1.29 Crore) across three academic years before living expenses.
Cost of Living in Leeds for Automotive Engineering Students
Leeds estimates combined weekly student spending at £199 (INR 25,331) to £423 (INR 53,844). The range includes accommodation and routine living expenses, so it should not be divided into unsupported categories.
Planning basis: Monthly figures divide the official annual range by 12. The 2025 estimate remains separate from the 2027/28 tuition rate.
| Expense | Monthly GBP | Monthly INR | Annual GBP | Annual INR |
|---|---|---|---|---|
| Combined student living estimate | £862 to £1,833 | INR 1.10 Lakhs to INR 2.33 Lakhs | £10,348 to £21,996 | INR 13.17 Lakhs to INR 28.00 Lakhs |
Three years of living costs equal a calculated £31,044 (INR 39.52 Lakhs) to £65,988 (INR 84.00 Lakhs). Tuition plus living therefore totals £132,144 (INR 1.68 Crore) to £167,088 (INR 2.13 Crore).
The Student visa maintenance threshold is a separate immigration requirement rather than a Leeds spending forecast. Applicants should budget from university costs and prove the required visa funds independently.
Read More: UK accommodation planning for international students
ROI reality: The standard route needs an estimated INR 1.68 Crore to INR 2.13 Crore before visa charges. Confirm funding across all three years before valuing optional experiences.
Leeds Automotive Engineering BEng Admission 2027
Academic threshold: Leeds requires A*AA including Mathematics and either Physics or Chemistry. Indian guidance spans 60% to 85% overall, with 75% to 90% in two relevant subjects.
The broad percentage range varies by Indian board, so its lower end is not an automatic course threshold. Leeds makes the final equivalency decision using the submitted qualification and subject marks.
Common 2027 entry context: The table connects the course offer with published Indian qualification guidance and the standard three-year study format.
| Admission factor | Published requirement | Indian applicant interpretation |
|---|---|---|
| Academic offer | A*AA including Mathematics and Physics or Chemistry | Typically 60% to 85% overall, with 75% to 90% in two relevant subjects |
| Mathematics | Required within the A*AA offer | Present a recognised Standard XII Mathematics result at the applicable board-specific subject level |
| Science subject | Physics or Chemistry required | Use the stronger accepted science result and provide any required practical evidence |
| Practical science | Pass required when an A-level Science subject is taken | Confirm whether the submitted board qualification includes an equivalent assessed practical component |
| Study format | Three years, full time and on campus | Choose H335 only when the standard route fits better than the four-year MEng or industrial variant |
Meeting the percentage guidance does not remove the subject conditions. A suitable application therefore needs strong Mathematics plus Physics or Chemistry evidence, not only a high overall average.
Curriculum and Course Fit
The course carries 120 credits in each academic year. Years 1 and 2 establish computing, design, thermofluids, mechanics, materials, mathematics, controls, mechatronics and engineering management.
Students design, build and test an autonomous electric buggy during the shared foundation stage. The project exposes the tradeoff between theoretical breadth and the specialist vehicle content concentrated in Year 3.
Year 3 specialisation: Automotive Propulsion Systems covers engines, batteries, fuel cells, drivelines and electric vehicles. Vehicle Design and Analysis examines tyre forces, acceleration, braking and handling.
| Curriculum stage | Representative content | Decision value |
|---|---|---|
| Year 1 foundations | Engineering computing, design, thermofluids, mechanics, materials and mathematics | Requires sustained quantitative work before automotive specialisation |
| Year 2 integration | Vibration, control, mechatronics, measurement, manufacture and engineering management | Builds the systems view needed for vehicle development |
| Year 3 automotive core | Propulsion, vehicle design, additive manufacture and computational fluid and structural mechanics | Concentrates the course-specific technical depth in the final year |
| Individual project | 40-credit supervised engineering investigation | Creates the main independent evidence for employment or further study |
Assessment uses written examinations and coursework, including laboratory reports, project reports, teamwork and presentations. Applicants should expect both timed technical assessment and extended design documentation.
Course-specific National Student Survey evidence covers 15 respondents graduating in 2024/26, with an 87% response rate. Positive scores were 96% for teaching, 88% for learning opportunities and 86% for assessment and feedback.
The same cohort reported 88% positive academic support, 95% positive learning resources and 92% positive student voice. The small sample offers useful context but should not be treated as a universal experience.
English Language Requirements for Indian Applicants
English Language Proficiency (ELP) requires IELTS Academic 6.0 overall with no component below 5.5. Every component minimum matters because a stronger overall result cannot offset a weaker section.
Leeds publishes a revised TOEFL iBT (Test of English as a Foreign Language Internet-Based Test) scale from 21 January 2026. The table reproduces that policy without converting between scales.
| English route | Minimum requirement | Indian applicant action |
|---|---|---|
| IELTS Academic | 6.0 overall with no less than 5.5 in each component | Meet every component minimum in one accepted result |
| TOEFL iBT from 21 January 2026 | 4 overall with no less than 4 in each component | Use the published 1 to 6 scale and a test-centre result |
| PTE Academic | 60 overall with no less than 59 in each component | Avoid the online version because Leeds does not accept it |
| Standard XII English | 70% or 75% depending on the state board | Confirm board eligibility before relying on school English evidence |
PTE means Pearson Test of English. Applicants should select a route early enough for score validity to cover the September 2027 course start.
- Prioritise Mathematics and science transcripts because both subjects form explicit conditions within the A*AA offer.
- Use IELTS or PTE when their familiar scales make component-level preparation easier.
- Submit TOEFL only after confirming that the score report uses Leeds’ post-January-2026 scale.
Preparation fit note
The best preparation combines Mathematics, physical science and practical design, because automotive specialisation follows two broad mechanical engineering years.
Tip for Indian students: Treat Leeds’ percentage band as board-specific guidance rather than an offer. Verify Mathematics, science and English evidence against your exact qualification.
Leeds Automotive Engineering BEng Application 2027
Application route: International applicants use UCAS for the single September 2027 intake. The equal-consideration deadline is 13 January 2027 at 18:00 UK time, or 23:30 IST.
Leeds may use the personal statement and reference to distinguish applicants with similar academic profiles. Interviews are not standard, although selected applicants may receive an interview or technical test invitation.
The official UCAS 2027 timeline controls portal cutoffs. UK time governs timed deadlines, while the table provides the equivalent Indian time.
| Application stage | Published UK date and time | Indian time | Applicant meaning |
|---|---|---|---|
| Completed applications can be submitted | 1 September 2026 | 1 September 2026 | Send only after the reference and every application section are complete |
| Equal-consideration deadline | 13 January 2027 at 18:00 UK time | 13 January 2027 at 23:30 IST | Main cutoff for guaranteed equal consideration |
| UCAS Extra opens | 25 February 2027 | 25 February 2027 | Available only when the published Extra conditions are satisfied |
| Provider decisions due | 12 May 2027 | 12 May 2027 | Applies to applications submitted by 13 January |
| Applicant reply deadline | 2 June 2027 | 2 June 2027 | Applies when every decision arrived by 12 May |
| Late application cutoff | 30 June 2027 at 18:00 UK time | 30 June 2027 at 22:30 IST | Later applications enter Clearing automatically |
| Late provider decisions due | 14 July 2027 | 14 July 2027 | Applies to applications submitted by 30 June |
| Late applicant reply deadline | 21 July 2027 | 21 July 2027 | Applies when every decision arrived by 14 July |
| Final 2027 application deadline | 23 September 2027 at 18:00 UK time | 23 September 2027 at 22:30 IST | Final system deadline without guaranteed course availability |
The January cutoff protects equal consideration and leaves more time for academic conditions, funding and visa work. Later UCAS stages remain contingencies because Leeds does not promise places after that date.
How to Build the 2027 Application
The UCAS personal statement uses three questions and a shared 4,000-character limit. Leeds reviews the answers together for subject motivation, academic preparation and useful activity beyond formal education.
For this course, evidence should connect Mathematics and physical science to vehicle or mechanical problems. Coding, computer-aided design, electronics, model building or technical competitions can support that connection.
- Explain why vehicle dynamics, propulsion or low-emission transport creates a specific academic motivation.
- Connect Mathematics plus Physics or Chemistry study to modelling, forces, energy or engineering design.
- Reflect on one project by naming the design choice, evidence used and resulting improvement.
- Complete the referee process before 13 January 2027 because UCAS cannot send an unfinished application.
A standard offer does not require an interview, but Leeds can invite one when further evidence would inform its decision. Some applicants may also face a Mathematics, Mechanics or Physics test.
Check Out: UCAS application steps for Indian students
Application timing note
Use the January equal-consideration deadline as the working cutoff, then retain later dates only for decision tracking or a clearly understood contingency.
Application tip: Submit the complete UCAS file by 13 January 2027 at 23:30 IST. A later application loses guaranteed equal consideration and compresses financial and visa preparation.
Leeds Automotive Engineering BEng Scholarships 2027
Target-cycle funding status: Leeds has not published confirmed 2027/28 international scholarship values or deadlines for this BEng. Prior-cycle awards can guide preparation but cannot reduce the target tuition budget.
The 2026/27 routes below had different values and selection conditions. Applicants must wait for 2027/28 terms before assuming Indian eligibility, course coverage or an application date.
Prior-cycle planning context: Every amount in the table relates to 2026/27 and remains unconfirmed for September 2027 entry.
| Funding route | Published value | INR equivalent | Planning action |
|---|---|---|---|
| International Excellence Scholarship | £3,000, £6,000 or £16,000 | INR 3.82 Lakhs, INR 7.64 Lakhs or INR 20.37 Lakhs | Confirm 2027/28 BEng eligibility, selection terms and deadline |
| International Regional Scholarship | £5,000 | INR 6.36 Lakhs | Check whether India and Automotive Engineering remain eligible |
| Global Community Bursary | £10,000 | INR 12.73 Lakhs | Verify target-cycle criteria and whether this undergraduate route reopens |
The Excellence award had three values, so applicants should not plan around its maximum before selection. The confirmed £101,100 (INR 1.29 Crore) tuition remains the base funding requirement.
Scholarship arithmetic cannot use an older award against a current fee unless Leeds republishes compatible terms. Keep each prior-cycle amount outside the core 2027/28 funding plan.
- Prepare academic and project evidence because the prior Excellence route was competitive rather than automatic.
- Retain financial and community-impact documents if a comparable bursary reopens for 2027/28.
- Build the visa funding plan without an award because no target-cycle scholarship value or deadline is confirmed.
Also Check: University of Leeds scholarship options
Funding verification
Use older awards only to prepare evidence, then verify values and deadlines on the official international scholarship page before budgeting any reduction.
Scholarship reality: No target-cycle award currently offsets the £101,100 (INR 1.29 Crore) tuition total. Secure the base budget before treating scholarship selection as upside.
Leeds Automotive Engineering BEng Salary 2027
Course-cohort limitation: Leeds publishes no Automotive Engineering BEng salary median or offer rate. Discover Uni instead reports broader Engineering and Technology earnings plus Production and Manufacturing Engineering destinations.
The subject-group evidence is useful for setting boundaries, but it cannot predict one student’s placement. Course-specific projects, Formula Student participation and optional work experience remain controllable employment evidence.
Latest published destination context: The table labels every figure by scope and cohort rather than presenting broader results as BEng outcomes.
| Outcome measure | Published figure | Evidence scope | Applicant interpretation |
|---|---|---|---|
| Work or further study after 15 months | 90% | 30 Production and Manufacturing Engineering graduates from 2023/24 | Subject-group destination evidence, not a course offer rate |
| Highly skilled work | 95% | 25 employed subject-group respondents from 2023/24 | Professional-level occupation context from a small broader cohort |
| Engineering professionals | 55% | Employed subject-group respondents | One reported professional direction within the broader group |
| Information technology professionals | 30% | Employed subject-group respondents | Shows that computational skills can support another pathway |
The occupation split supports the curriculum’s combination of modelling, control and physical design. However, its scope includes other courses, so applicants should request current BEng destinations before making borrowing decisions.
Salary Evidence for Automotive Engineering
No course-specific salary median is published. The closest official series covers all full-time Engineering and Technology graduates at Leeds, making each amount a university subject-group benchmark.
| Salary measure | Amount in GBP | INR equivalent | Evidence scope |
|---|---|---|---|
| Median earnings after 15 months | £33,000 | INR 42.01 Lakhs | 140 Engineering and Technology graduates from 2023/24 |
| Median earnings after three years | £31,000 | INR 39.46 Lakhs | 465 Engineering and Technology graduates from 2016/18 |
| Median earnings after five years | £38,500 | INR 49.01 Lakhs | 485 Engineering and Technology graduates from 2016/18 |
Source: Discover Uni evidence for UCAS H335, using Graduate Outcomes and Longitudinal Education Outcomes data.
The salary series changes by cohort and is nominal, so the lower three-year median does not prove declining pay. Different graduates and reporting periods produced each figure.
Leeds reports recent graduate roles including chassis engineering, driveline development and automotive engineering. Named organisations show recorded destinations rather than guaranteed recruitment, sponsorship or hiring volume.
Career Fit and Return on Investment
The calculated tuition-plus-living budget is £132,144 (INR 1.68 Crore) to £167,088 (INR 2.13 Crore). That outlay makes funding certainty, practical experience and intended work location central to the return decision.
- The £33,000 (INR 42.01 Lakhs) subject median is gross pay, so model UK tax and living costs before comparing earnings with programme cost.
- The 90% work-or-study figure covers a broader subject group, so request Automotive Engineering destinations before using it as employment evidence.
- The 18-month Graduate Route limits the post-study search period, so build employer-facing vehicle analysis evidence before Year 3 ends.
- The BEng only partially meets the Chartered Engineer academic requirement, so compare the four-year MEng before committing to the shorter route.
- For an India return, compare role-specific local offers against the full INR 1.68 Crore to INR 2.13 Crore budget before borrowing.
Take-home pay varies with tax code, pension choices and employment location. Test an offer with the official UK income-tax estimator before treating gross salary as disposable income.
Evidence limitation
Use the published engineering medians as broad benchmarks, then request course-level destinations before connecting salary expectations to loan repayment.
ROI reality: Practical projects and recognised accreditation add career value, but no BEng salary median proves repayment. Proceed with affordable funding and a defined target market.
UK Visa for Leeds Automotive Engineering BEng Students 2027
Student visa budget: The application fee is £558 (INR 71,028), while the health surcharge is £776 (INR 98,777) yearly. Leeds uses the outside-London maintenance rule of £1,203 (INR 1.53 Lakhs) monthly from 30 November 2026. Its nine-month maximum is £10,827 (INR 13.78 Lakhs), separate from the university living estimate.
- The Graduate Route allows 18 months after study for applications made from 1 January 2027, but it does not guarantee employment.
- The Graduate Route application fee is £937 (INR 1.19 Lakhs), while its health surcharge creates another separate cost.
- A Skilled Worker switch needs an approved sponsor and the applicable salary rule, with a standard threshold of £41,700 (INR 53.08 Lakhs).
- Skilled Worker settlement can qualify after five years, while undergraduate dependants are generally restricted unless a government-sponsored exception applies.
Read More: UK post-study work route after graduation
Visa reality: The 18-month Graduate Route is a job-search window rather than a placement promise. Build sponsor-ready technical evidence through projects and any approved work experience.
Leeds Automotive Engineering BEng Ranking 2027
Ranking scope: No checked publisher ranks the BEng as a standalone programme. Current results cover Mechanical Engineering in the UK and the broader Engineering and Technology area worldwide.
These positions describe the surrounding academic environment rather than admission difficulty, graduate pay or employer preference. Curriculum, accreditation and project access provide more precise evidence for this course choice.
| Publisher and edition | Position | Published scope | Applicant interpretation |
|---|---|---|---|
| Guardian University Guide 2027 | 7th in the UK | Mechanical Engineering at University of Leeds | Relevant school-level subject context, not a BEng rank |
| QS World University Rankings by Subject 2026 | Top 100 worldwide | Engineering and Technology at University of Leeds | Broad international subject context across several disciplines |
The mechanical engineering result is closer to the BEng because its first two years share that disciplinary foundation. The QS result is broader and should carry less weight in programme-level decisions.
Automotive fit depends more directly on Year 3 propulsion, vehicle design, computational mechanics and the 40-credit project. Applicants should also compare the BEng’s partial professional requirement with the integrated MEng.
Also Check: University of Leeds subject ranking context
Ranking interpretation
Use both positions to assess the wider engineering environment, then judge this BEng through its automotive modules, accreditation and project model.
Honest take: Leeds has ranked mechanical and engineering subject strength, but no standalone BEng position. Course structure and accreditation remain the more exact fit evidence.
Leeds’ BEng fits applicants who want a broad mechanical foundation followed by concentrated vehicle engineering, computational analysis and an independent project. The route also rewards students willing to build evidence through Formula Student or optional work experience. However, the INR 1.68 Crore to INR 2.13 Crore calculated budget and partial Chartered Engineer requirement create material tradeoffs. Submit by 13 January 2027, then compare the three-year route with the MEng before making the funding commitment.
Leeds Automotive Engineering BEng FAQs
Ques. Should I choose the Leeds Automotive Engineering BEng or MEng?
Ans. Choose the BEng for a shorter three-year route and lower total cost. Compare the MEng when fully meeting the Chartered Engineer academic requirement justifies another year.
Ques. Is the published Indian percentage range enough for admission?
Ans. No, the range is board-specific guidance rather than an automatic offer. Applicants must also satisfy the course conditions in Mathematics plus Physics or Chemistry.
Ques. What total budget should an Indian student prepare?
Ans. Calculated tuition plus three years of estimated living costs equals £132,144 (INR 1.68 Crore) to £167,088 (INR 2.13 Crore). Visa charges and optional-year costs remain additional.
Ques. When should applicants submit if scholarships are unconfirmed?
Ans. Submit the complete UCAS application by 13 January 2027 at 23:30 IST for equal consideration. Build the base budget without an award, then revise it after 2027/28 funding appears.
Ques. Do published outcomes prove the BEng will repay its cost?
Ans. No course-specific salary median or offer rate is published. Use broader engineering benchmarks only as context and assess repayment against verified funding, work location and role-specific offers.
Tuition Fees
| Year | 1st Year Fees |
|---|---|
| Tuition Fees | $43230 (GBP 32750) |
Other Expenses
| Head | Avg Cost Per Year |
|---|---|
| Living Expenses | $13659 (GBP 10348) |
| Off-Campus Accommodation | $7550 (GBP 5720) |
Previous Year Tuition Fees
| Year | 1st Year Fees |
|---|---|
| 2025 | $39930 (GBP 30250) |
| 2024 | $39930 (GBP 30250) |
| 2023 | $36300 (GBP 27500) |
Important Dates
| Event | Application Date |
|---|---|
| UCAS Equal Consideration Application Deadline For 2026 Intake | |
| Application Deadline for 2026 Intake | |
| Application Deadline for International Excellence Scholarships | |
| Decision Deadline for 2026 Intake | |
| Course Start Date for 2026 Intake | |



Do you think the Rankings are wrong ? Report Here
TOP Scholarships
| Scholarship name | Award amount | Eligibility |
|---|---|---|
| International Regional Scholarships | £5,000 fee reduction | Be classified as an international fee-paying student |
| International Excellence Scholarships | £3,000, £6,000 or £16,000 | Be an international student for fee purposes and hold a conditional or unconditional offer for an eligible undergraduate course starting in September 2026. |
Key Resources for Your Study Abroad Journey
Scholarship Grants & Financial Aids
| Name | Scholarship Per Student | Level of Study | Type | |
|---|---|---|---|---|
| International Undergraduate Science and Engineering Scholarship | Scholarship per student$ 3,382/Yr$2,562 | Level Of StudyBachelor | TypeCollege-Specific | |
| VueVille Future Technology Scholarship | Scholarship per student$ 1,320/Yr$1,000 | Level Of StudyBachelor | TypeMerit-Based | |
| Forktip Women’s- Innovation Scholarship | Scholarship per studentVariable Amount | Level Of StudyBachelor | TypeCollege-Specific | |
| Axol Science Scholarship | Scholarship per student$ 2,640/Yr$2,000 | Level Of StudyBachelor | TypeCompany-Sponsored | |
| Business Administration Scholarships | Scholarship per studentVariable Amount | Level Of StudyBachelor | TypeMerit-Based |

















Comments