Master of Science [M.S] [Advanced Materials Engineering] From University of Texas

University of Texas at San Antonio (UTSA) M.S. Advanced Materials Engineering is an on-campus master’s, typically taking two years at Main Campus in San Antonio. Engineering or science graduates need a grade point average of 3.0/4.0, approximately 70% to 75% in India, subject to official credential evaluation. For June 2027 entry, a six-credit engineering illustration is US$9,877.84 (INR 9.33 Lakhs); full-degree fees depend on registration and course mix.

The degree connects materials synthesis, characterisation and device applications with Management of Technology, making it relevant to applicants interested in translating laboratory work into usable technology. Its electronic, biomedical and semiconductor concentrations suit applicants who can identify a materials problem they want to investigate. Both the thesis and project routes require research, so the non-thesis option still involves an independent investigation.

• The curriculum permits approved electives across departmental boundaries, allowing a technical specialism to draw on more than one discipline.
• The department identifies alumni employed at Intel and Applied Materials, providing examples of career destinations without publishing placement probabilities.
• The programme offers a route towards doctoral study for applicants who want to develop a research portfolio before applying.

Also Check: UT San Antonio Advanced Materials Engineering Admission

UTSA MS Advanced Materials Engineering Fees and Living Costs 2027

Summer 2027 fees depend on registered credits, with an additional differential charge determined by the college offering each course. The example below uses six engineering credits, so it is a semester illustration rather than a prescribed study plan or full-degree quotation.

2026-27 non-resident graduate rates: six Summer 2027 credits, all taught within Klesse College, before course-specific and international insurance charges.

All INR conversions in the article use a conversion rate of USD 1 = INR 94.4598 as of 06 November 2026. Rates fluctuate daily, verify before applying.

Source: UT San Antonio Summer 2027 non-resident graduate fee schedule; engineering differential added separately.

The published six-credit base is US$9,518.62 (INR 8.99 Lakhs), before the engineering differential. Business electives attract US$140.45 (INR 13,267) per credit instead, so an approved course list is necessary before calculating the actual bill. Verify the target fee on the official fee page.

• The international application fee is US$90 (INR 8,501) per programme, so submitting another graduate application creates another processing charge.
• The university’s standard fee table excludes separately calculated differential tuition, making an engineering-specific calculation essential before accepting a loan sanction.
• A fixed programme deposit and programme-specific payment schedule are not published on the checked course surfaces, so request those terms with the admission offer.

Cost of Living in San Antonio for Materials Engineering Students

The 2026-27 off-campus graduate budget provides separate housing, meals, transport and personal allowances. Monthly values below divide the fall-and-spring allowances by an explicit nine-month budgeting assumption; they are calculated figures, not university-quoted monthly prices.

A calculated initial summer subtotal is US$16,101.84 (INR 15.21 Lakhs), comprising the six-credit engineering illustration, three months of living allowances and the application fee. This is a funding floor because insurance, travel, books and course-specific charges remain additional, while later semesters require their own fee schedules. It is neither a complete degree budget nor the financial amount required for immigration documentation.

Read More: Cost of Living in USA for Indian Students

Key insight: Engineering differential tuition sits outside the standard Summer 2027 base, so obtain a course-by-course bill before treating an advertised graduate estimate as your financing requirement.

UTSA MS Advanced Materials Engineering Admission 2027

Summer, fall and spring entry are published for this programme, with the next applicant-accessible start in June 2027. Admission requires relevant science or engineering preparation, so the degree title alone does not establish readiness for a chosen materials concentration.

June 2027 admission preparation: the university evaluates foreign credentials and the department reviews academic and research preparation.

The Indian percentage range is approximate, because the checked programme pages do not publish an India-specific conversion. Arrange the foreign credential evaluation before judging eligibility from a percentage alone. The live application page asks for one reference, while the catalogue permits one to two; follow the application checklist and keep a second recommender available.

No minimum work-experience requirement, programme acceptance rate or entering-class score profile appears on the checked programme surfaces. Consequently, the academic threshold should guide eligibility screening rather than an invented estimate of admission probability. Use the purpose statement to connect a completed project, experimental method or modelling task to the concentration you intend to study.

English Language Proficiency

English Language Proficiency is demonstrated through an accepted test unless an official exemption applies. The programme publishes the revised Test of English as a Foreign Language internet-based test (TOEFL iBT) requirement directly. Select the row matching your test date because the university distinguishes the earlier and revised scales.

The current programme wording is: “For exams taken on or after January 21, 2026: We require a minimum TOEFL iBT score of 4.0.”

The university also specifies IELTS Academic and rejects English scores older than two years. Component minima and a Pearson test route are not stated on the checked programme table, so do not substitute another test without written confirmation.

• India is absent from the published country-exemption list, so an Indian school-English mark should not be treated as an automatic waiver.
• The Graduate Record Examination has no published competitive score benchmark for this programme, so allocate preparation time to an accepted English test before inventing a higher target.
• Request official test reporting early enough for the complete application deadline, including reference and credential-evaluation processing.

Tip for Indian students: A science degree can meet the subject-background rule, but your statement should show preparation for the selected materials specialism through specific coursework or research.

UTSA MS Advanced Materials Engineering Application 2027

The Summer 2027 international deadline is 01 March 2027, while fall entry provides a separate priority date before its final international cutoff. Choose the intake before opening the application because the university uses different academic-year portals.

Published future application windows: Summer 2027 belongs to 2026-27; the later entries below belong to 2027-28.

The university’s Central Time cutoff controls submission; the Indian conversions fall on the following calendar day. Completed applications are reviewed as received, with decisions generally issued within four to six weeks. No fixed decision-release dates, interview timetable or separate programme scholarship cutoff are published alongside these application stages.

• Select the 2026-27 application for Summer 2027 and the 2027-28 application for Fall 2027, Spring 2028 or Summer 2028.
• Upload transcripts from every institution attended and arrange a course-by-course evaluation rather than waiting for the admission decision to begin credential processing.
• Ask your reference to submit through the application system, because uploading a student-held copy does not complete the recommendation requirement.
• For Fall 2027, use the 01 February priority date as the preparation target, while confirming separately whether a particular funding opportunity has its own deadline.

A research-focused statement should identify the materials problem, the method you have used and the technical gap you want to address. For example, connect an undergraduate characterisation project to the relevant electronic or biomedical concentration instead of listing every available research area. Before choosing summer entry, ask the graduate advisor whether the required starting courses and a suitable supervisor are available for that term.

Application tip: Summer 2027 has a published entry window, but research and course sequencing still need advisor confirmation before you commit to that start.

UTSA MS Advanced Materials Engineering Scholarships 2027

Funding is not automatic with admission, and the checked sources do not promise a funded package to every Advanced Materials Engineering master’s student. Separate tuition support, paid research appointments and reimbursement awards because each affects your initial funding requirement differently.

International Student Grant

The International Student Grant is a current published, cycleless need-based route for international graduate students, with the maximum determined by available funds. Applicants need valid F-1 or J-1 status, satisfactory academic progress and full-time fall-and-spring enrolment. The published graduate threshold is grade point average 3.0/4.0, approximately 70% to 75% for Indian comparison, although the university applies its own enrolled-student grading rules.

The grant application requires an explanation of financial need and immigration documentation, so it should not be treated as an assured pre-arrival tuition discount. The university describes September availability for the fall-and-spring academic year; it does not publish a dedicated Summer 2027 grant deadline. Submit through the international grant process when the applicable form becomes available.

Graduate School Academic Travel Fund

The Graduate School Academic Travel Fund offers up to US$750 (INR 70,845) under its current published, cycleless rules. It supports presenting research at professional meetings and is reimbursement funding, so you need cash to meet travel costs before repayment. Eligibility includes six enrolled course credits during a regular semester or three during summer, good academic standing and the required travel approvals.

The standing submission dates are 01 September and 01 November for fall, 01 February and 01 April for spring and 01 July for summer. These recurring dates are not a separately announced June 2027 recruitment scholarship schedule. Apply through the Graduate School process after obtaining departmental travel documents and preparing the research presentation justification.

Materials Research Graduate Fellowships and Assistantships

The department advertises Materials Research Graduate Fellowship opportunities, making this a relevant enquiry for electronic-materials research applicants. However, the detailed funding sheet is undated legacy material rather than a confirmed Summer 2027 award announcement. Its historical amount and timing are therefore excluded from the budget; request the applicable call and eligibility terms from the programme.

A Graduate Research Assistant I appointment is another published route open to master’s students, with duties determined by the faculty research project. The university caps combined assistantship assignments at 19 hours weekly and directs applicants to departments or its employment platform. Master’s pay, tuition coverage and insurance terms must come from the actual offer, so the university’s doctoral stipend minimum cannot establish your master’s funding package.

• Approach a potential materials supervisor with a specific research match and ask whether a funded master’s appointment exists for your proposed intake.
• Keep travel reimbursement outside the tuition-funding calculation because the award supports presenting research after enrolment.
• Request the written amount, appointment duration and any tuition-rate adjustment before subtracting funding from the non-resident budget.

Also Check: UT San Antonio Scholarships for International Students

Scholarship reality: Research appointments may support the same work as a thesis, but only a written master’s offer establishes the amount available for your tuition and living costs.

UTSA MS Advanced Materials Engineering Salary 2027

Programme-specific salary and placement rates are unpublished on the checked official programme and department pages. Those sources identify alumni destinations, but provide no named graduating cohort, salary sample, offer rate or sector distribution from which to estimate an individual applicant’s earnings.

The department reports alumni employed at Intel, Applied Materials and Union Pacific, alongside graduates progressing to doctoral study. Those examples establish possible destinations without showing how frequently each employer hires from this degree or whether a particular vacancy offers immigration sponsorship. An applicant targeting semiconductor work should therefore ask the advisor about relevant research supervision and recent project destinations before treating employer names as recruitment access.

External U.S. job-market benchmarks, May 2025: annual gross occupational medians from the Bureau of Labor Statistics, covering experience levels across the occupation.

Source: U.S. Bureau of Labor Statistics, Occupational Outlook Handbook, Materials Engineers; May 2025 wages.

The research-sector median offers context for evaluating a materials-research career, but it does not identify master’s starting pay or this programme’s outcomes. Inspect the official materials-engineer labour-market dataset against the location and duties of an actual vacancy. Take-home pay depends on tax residency, withholding and benefits; use the calculator route in official tax-withholding guidance only where applicable to your status.

Cost, Research Value and Return on Investment

The initial summer funding floor is US$16,101.84 (INR 15.21 Lakhs), while a verified complete-degree cost depends on course selection and later fee schedules. Return on investment therefore requires a funding offer and a defined technical destination, rather than dividing an occupational median by a partial budget.

• The 30-credit thesis includes six research credits, so applicants pursuing doctoral preparation should ask whether funded supervision can support that research commitment.
• The 33-credit non-thesis route includes a research project, so applicants seeking a taught-only qualification should reassess fit before financing the additional coursework.
• The university’s master’s assistantship route has offer-specific pay and coverage, so construct a self-funded budget until a written appointment reduces identifiable expenses.
• Standard post-completion practical training lasts up to 12 months, so a United States employment plan should identify eligible roles before relying on longer conditional work permission.
• The published salary benchmarks describe United States employment, so an India-return applicant should obtain role-specific Indian salary evidence before accepting a dollar-denominated loan obligation.

Read More: Post-Study Work Options in USA

ROI reality: The research and project routes can build different portfolios, but employer examples and occupational medians cannot establish a repayment period without programme outcomes and a complete cost.

USA Visa for UTSA MS Advanced Materials Engineering Students 2027

This on-campus master’s normally requires F-1 student status and the university-issued Form I-20, the certificate supporting a student visa application. The visa application costs US$185 (INR 17,475), while the separate Student and Exchange Visitor Information System fee is US$350 (INR 33,061). These charges sit outside tuition, and UTSA also requires financial-support documents before issuing the immigration certificate.

• Post-completion practical training permits up to 12 months of degree-related work, with a conditional 24-month extension for eligible science and engineering classifications and qualifying employers.
• For employer-sponsored H-1B work, the required wage is the higher of the applicable prevailing or actual wage, so a materials-engineering median cannot establish sponsorship eligibility.
• Employment-based permanent residence requires a separate qualifying process and visa availability, so this master’s creates no fixed settlement timeline.
• F-2 status can cover a spouse and unmarried children under 21, but dependants cannot work, so family budgeting cannot assume a second earned income.

Read More: USA Student Visa Requirements for Indian Applicants

Visa reality: Confirm the programme classification printed on your Form I-20 before including a conditional work extension in the financial case for this degree.

UTSA MS Advanced Materials Engineering Ranking 2027

The available subject evidence places UT San Antonio in the 301 to 400 band for Engineering in Times Higher Education’s 2026 table. This is a broad engineering subject result, not a separate ranking of the Advanced Materials Engineering master’s.

Published 2026 subject edition: retained as labelled context for June 2027 applicants.

The subject band provides research-environment context, but it cannot identify the supervisor or project most relevant to semiconductor or biomedical materials. For this interdisciplinary degree, examine the selected concentration’s methods and available supervision before giving the band weight in the enrolment decision.

Honest take: The engineering ranking has broader scope than this master’s, so use research alignment and the written funding offer as the programme-specific decision evidence.