![Modern Education Society's Wadia College of Engineering - [MESWCOE]](https://img.collegedunia.com/public/college_data/images/logos/1709880419mainmescoe1.png?h=71.7&w=71.7&mode=stretch)
The Official MHT-CET Cutoff 2026 for MES Pune has not been released yet. However, students can refer to the expected MHT-CET 2026 cutoff for MES Pune, which is based on the trends observed in previous years cutoff.
MES Pune MHT-CET Cutoff 2026 (Category Wise)
MES Pune MHT-CET 2026 Expected Cutoff for DEFOBCS Category ranges between 37.6 - 91.07. For Round 1, MES Pune MHT-CET 2026 is expected to be 37.6-88.25.
| Category | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| DEFOBCS | 37.6-88.25 | 37.6-91.07 |
| DEFOPENS | 33.5-90.09 | 33.5-92.53 |
| EWS | 25.97-93.94 | 14.76-94.03 |
| GNT1S | 80.23-91.48 | 80.23-91.48 |
| GNT2S | 84.75-93.23 | 84.75-93.23 |
| GOBCS | 87.4-93.99 | 87.4-93.99 |
| GOPENS | 89.88-94.45 | 89.88-94.45 |
| GSCS | 79.47-87.57 | 79.47-87.57 |
| GVJS | 79.7-90.26 | 79.7-90.26 |
| LNT2S | 80.5-92.24 | 80.5-92.24 |
| LOBCS | 87.01-94.35 | 87.01-94.35 |
| LOPENS | 87.96-94.66 | 87.96-94.66 |
| LSCS | 76.5-87.86 | 76.5-87.86 |
| TFWS | 53.86-95.4 | 53.86-95.58 |
| GNT3S | 88.73-93.08 | 88.73-93.08 |
| LNT3S | 82.35-88.26 | 82.35-88.26 |
| DEFROBCS | 13.32-88.49 | 13.32-88.49 |
| GSTS | 14.13-30.69 | 14.13-30.69 |
| PWDOPENS | 26.17-68.63 | 26.17-68.63 |
| LNT1S | 85.26-90.26 | 85.26-90.26 |
| LSTS | 19.99-66.09 | 19.99-66.09 |
| LVJS | 86.83-87.47 | 86.83-87.47 |
| GOBCH | 6.95-93.46 | 6.95-93.46 |
| GOBCO | 25.03-94.32 | 25.03-94.32 |
| GOPENH | 31.5-93.95 | 31.5-94.2 |
| GOPENO | 45.91-94.63 | 45.91-94.63 |
| GSCH | 6.57-85.57 | 0.29-87.7 |
| GSCO | 1.16-89.52 | 1.16-90.53 |
| GSEBCH | 63.54-92.81 | 63.54-93.26 |
| GSTH | 3.19-54.18 | 3.19-93.26 |
| LOBCH | 4.21-93.57 | 4.21-93.76 |
| LOPENH | 32.34-94 | 32.34-95.51 |
| LOPENO | 20.36-94.43 | 20.36-96.82 |
| LOBCO | 18.45-94.06 | 12.2-94.1 |
| GNT2H | 30.01-92.86 | 30.01-93.75 |
| GNT3H | 23.12-93.05 | 9.51-93.05 |
| GNT3O | 3.35-93.88 | 3.35-93.88 |
| GSEBCO | 79.7-94.18 | 72.5-94.18 |
| GVJH | 40.65-85.78 | 9.36-89.84 |
| LSCH | 6.95-85.52 | 6.95-89.13 |
| LSCO | 39.05-90.52 | 11.11-90.52 |
| GNT1H | 56.58-93.03 | 56.58-93.03 |
| GNT2O | 15.1-94.29 | 15.1-94.29 |
| LSEBCH | 45.58-93.11 | 45.58-93.11 |
| LSEBCO | 58.12-93.96 | 58.12-93.96 |
| GVJO | 72.1-94.62 | 69.49-94.62 |
| LNT2H | 64.71-93.26 | 43.12-93.26 |
| PWDOPENH | 2.66-50.97 | 2.66-93.85 |
| LNT1H | 77.64-88.28 | 77.64-88.28 |
| GNT1O | 78.42-92.24 | 78.42-94.19 |
| LNT2O | 84.14-94.07 | 78.67-94.07 |
| LVJH | 39.97-85.15 | 17.53-85.15 |
| LNT3H | 70.52-90.89 | 4.2-90.89 |
| LVJO | 71.85-80.09 | 54.09-80.09 |
| GSTO | 25.46-65.96 | 4.81-92.39 |
| LSTH | 3.9-47.35 | 3.9-90.88 |
| LSTO | 17.68-59.92 | 4.81-82.97 |
| LNT1O | 32.37-86.62 | 32.37-86.62 |
| ORPHAN | - | 73.89-93.75 |
| PWDOBCH | - | 80.79-93.86 |
| DEFSCS | 52.55-63.54 | 52.55-87.03 |
| PWDSCH | 33.7-33.7 | 33.7-85.41 |
| LNT3O | 49.79-91.74 | 49.79-91.74 |
| DEFRNT1S | 88.44-88.44 | 88.44-88.44 |
| DEFRSCS | 35.13-70.92 | 35.13-70.92 |
Also Check:
MES Pune MHT-CET Cutoff 2026 (Course Wise)
MES Pune MHT-CET Cutoff 2026 for DEFOBCS Category
BE Computer Engineering Cutoff for MHT-CET (DEFOBCS Category) expected to fall in the range between 82.23-91.07, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for DEFOBCS Category with expected range of 77.23-84.24. You can check course wise expected MHT-CET 2026 cutoff for DEFOBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 82.23-88.25 | 82.23-91.07 |
| BE Electronics & Telecom Engineering | 79.6-84.24 | 77.23-84.24 |
| BE Robotics and Automation | 69.33-74.22 | 47.01-74.22 |
| BE Mechanical Engineering | 37.6-57.62 | 37.6-76.8 |
MES Pune MHT-CET Cutoff 2026 for DEFOPENS Category
BE Computer Engineering Cutoff for MHT-CET (DEFOPENS Category) expected to fall in the range between 86.35-92.53, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for DEFOPENS Category with expected range of 63.71-89.33. You can check course wise expected MHT-CET 2026 cutoff for DEFOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 86.35-90.09 | 86.35-92.53 |
| BE Electronics & Telecom Engineering | 63.71-85.64 | 63.71-89.33 |
| BE Robotics and Automation | 51.26-85.06 | 50.61-85.06 |
| BE Mechanical Engineering | 33.5-72.38 | 33.5-72.38 |
MES Pune MHT-CET Cutoff 2026 for EWS Category
BE Computer Engineering Cutoff for MHT-CET (EWS Category) expected to fall in the range between 86.97-94.03, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for EWS Category with expected range of 75.24-87.55. You can check course wise expected MHT-CET 2026 cutoff for EWS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 86.97-93.94 | 86.97-94.03 |
| BE Electronics & Telecom Engineering | 81.28-87.51 | 75.24-87.55 |
| BE Robotics and Automation | 72.47-85.26 | 61.56-85.26 |
| BE Mechanical Engineering | 25.97-74.81 | 14.76-74.81 |
MES Pune MHT-CET Cutoff 2026 for GNT1S Category
BE Computer Engineering Cutoff for MHT-CET (GNT1S Category) expected to fall in the range between 91.48-91.48, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GNT1S Category with expected range of 89.15-89.15. You can check course wise expected MHT-CET 2026 cutoff for GNT1S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 91.48-91.48 | 91.48-91.48 |
| BE Electronics & Telecom Engineering | 89.15-89.15 | 89.15-89.15 |
| BE Robotics and Automation | 85.79-85.79 | 85.79-85.79 |
| BE Mechanical Engineering | 80.23-80.23 | 80.23-80.23 |
MES Pune MHT-CET Cutoff 2026 for GNT2S Category
BE Computer Engineering Cutoff for MHT-CET (GNT2S Category) expected to fall in the range between 93.23-93.23, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GNT2S Category with expected range of 91.84-91.84. You can check course wise expected MHT-CET 2026 cutoff for GNT2S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 93.23-93.23 | 93.23-93.23 |
| BE Electronics & Telecom Engineering | 91.84-91.84 | 91.84-91.84 |
| BE Robotics and Automation | 89.22-89.22 | 89.22-89.22 |
| BE Mechanical Engineering | 84.75-84.75 | 84.75-84.75 |
MES Pune MHT-CET Cutoff 2026 for GOBCS Category
BE Computer Engineering Cutoff for MHT-CET (GOBCS Category) expected to fall in the range between 93.99-93.99, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GOBCS Category with expected range of 92.62-92.62. You can check course wise expected MHT-CET 2026 cutoff for GOBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 93.99-93.99 | 93.99-93.99 |
| BE Electronics & Telecom Engineering | 92.62-92.62 | 92.62-92.62 |
| BE Robotics and Automation | 91.93-91.93 | 91.93-91.93 |
| BE Mechanical Engineering | 87.4-87.4 | 87.4-87.4 |
MES Pune MHT-CET Cutoff 2026 for GOPENS Category
BE Computer Engineering Cutoff for MHT-CET (GOPENS Category) expected to fall in the range between 94.45-94.45, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GOPENS Category with expected range of 93.4-93.4. You can check course wise expected MHT-CET 2026 cutoff for GOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 94.45-94.45 | 94.45-94.45 |
| BE Electronics & Telecom Engineering | 93.4-93.4 | 93.4-93.4 |
| BE Robotics and Automation | 92.63-92.63 | 92.63-92.63 |
| BE Mechanical Engineering | 89.88-89.88 | 89.88-89.88 |
MES Pune MHT-CET Cutoff 2026 for GSCS Category
BE Computer Engineering Cutoff for MHT-CET (GSCS Category) expected to fall in the range between 87.57-87.57, which makes it the most in-demand course for MES Pune. Furthermore,BE Robotics and Automation is expected to be the second most preferred course for GSCS Category with expected range of 84.91-84.91. You can check course wise expected MHT-CET 2026 cutoff for GSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 87.57-87.57 | 87.57-87.57 |
| BE Robotics and Automation | 84.91-84.91 | 84.91-84.91 |
| BE Electronics & Telecom Engineering | 84.59-84.59 | 84.59-84.59 |
| BE Mechanical Engineering | 79.47-79.47 | 79.47-79.47 |
MES Pune MHT-CET Cutoff 2026 for GVJS Category
BE Computer Engineering Cutoff for MHT-CET (GVJS Category) expected to fall in the range between 90.26-90.26, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GVJS Category with expected range of 87.6-87.6. You can check course wise expected MHT-CET 2026 cutoff for GVJS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 90.26-90.26 | 90.26-90.26 |
| BE Electronics & Telecom Engineering | 87.6-87.6 | 87.6-87.6 |
| BE Robotics and Automation | 85.26-85.26 | 85.26-85.26 |
| BE Mechanical Engineering | 79.7-79.7 | 79.7-79.7 |
MES Pune MHT-CET Cutoff 2026 for LNT2S Category
BE Computer Engineering Cutoff for MHT-CET (LNT2S Category) expected to fall in the range between 92.24-92.24, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LNT2S Category with expected range of 92.16-92.16. You can check course wise expected MHT-CET 2026 cutoff for LNT2S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 92.24-92.24 | 92.24-92.24 |
| BE Electronics & Telecom Engineering | 92.16-92.16 | 92.16-92.16 |
| BE Robotics and Automation | 90.7-90.7 | 90.7-90.7 |
| BE Mechanical Engineering | 80.5-80.5 | 80.5-80.5 |
MES Pune MHT-CET Cutoff 2026 for LOBCS Category
BE Computer Engineering Cutoff for MHT-CET (LOBCS Category) expected to fall in the range between 94.35-94.35, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LOBCS Category with expected range of 92.81-92.81. You can check course wise expected MHT-CET 2026 cutoff for LOBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 94.35-94.35 | 94.35-94.35 |
| BE Electronics & Telecom Engineering | 92.81-92.81 | 92.81-92.81 |
| BE Robotics and Automation | 92.57-92.57 | 92.57-92.57 |
| BE Mechanical Engineering | 87.01-87.01 | 87.01-87.01 |
MES Pune MHT-CET Cutoff 2026 for LOPENS Category
BE Computer Engineering Cutoff for MHT-CET (LOPENS Category) expected to fall in the range between 94.66-94.66, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LOPENS Category with expected range of 93.66-93.66. You can check course wise expected MHT-CET 2026 cutoff for LOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 94.66-94.66 | 94.66-94.66 |
| BE Electronics & Telecom Engineering | 93.66-93.66 | 93.66-93.66 |
| BE Robotics and Automation | 92.94-92.94 | 92.94-92.94 |
| BE Mechanical Engineering | 87.96-87.96 | 87.96-87.96 |
MES Pune MHT-CET Cutoff 2026 for LSCS Category
BE Computer Engineering Cutoff for MHT-CET (LSCS Category) expected to fall in the range between 87.86-87.86, which makes it the most in-demand course for MES Pune. Furthermore,BE Robotics and Automation is expected to be the second most preferred course for LSCS Category with expected range of 85.78-85.78. You can check course wise expected MHT-CET 2026 cutoff for LSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 87.86-87.86 | 87.86-87.86 |
| BE Robotics and Automation | 85.78-85.78 | 85.78-85.78 |
| BE Electronics & Telecom Engineering | 84.41-84.41 | 84.41-84.41 |
| BE Mechanical Engineering | 76.5-76.5 | 76.5-76.5 |
MES Pune MHT-CET Cutoff 2026 for TFWS Category
BE Computer Engineering Cutoff for MHT-CET (TFWS Category) expected to fall in the range between 85.74-95.58, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for TFWS Category with expected range of 84.24-92.73. You can check course wise expected MHT-CET 2026 cutoff for TFWS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 85.74-95.4 | 85.74-95.58 |
| BE Electronics & Telecom Engineering | 84.24-91.65 | 84.24-92.73 |
| BE Robotics and Automation | 74.22-91.01 | 74.22-91.01 |
| BE Mechanical Engineering | 53.86-82.39 | 53.86-93.54 |
MES Pune MHT-CET Cutoff 2026 for GNT3S Category
BE Computer Engineering Cutoff for MHT-CET (GNT3S Category) expected to fall in the range between 93.08-93.08, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GNT3S Category with expected range of 91.79-91.79. You can check course wise expected MHT-CET 2026 cutoff for GNT3S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 93.08-93.08 | 93.08-93.08 |
| BE Electronics & Telecom Engineering | 91.79-91.79 | 91.79-91.79 |
| BE Mechanical Engineering | 88.73-88.73 | 88.73-88.73 |
MES Pune MHT-CET Cutoff 2026 for LNT3S Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LNT3S Category) expected to fall in the range between 88.26-88.26, which makes it the most in-demand course for MES Pune. Furthermore,BE Robotics and Automation is expected to be the second most preferred course for LNT3S Category with expected range of 88.09-88.09. You can check course wise expected MHT-CET 2026 cutoff for LNT3S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 88.26-88.26 | 88.26-88.26 |
| BE Robotics and Automation | 88.09-88.09 | 88.09-88.09 |
| BE Mechanical Engineering | 82.35-82.35 | 82.35-82.35 |
MES Pune MHT-CET Cutoff 2026 for DEFROBCS Category
BE Computer Engineering Cutoff for MHT-CET (DEFROBCS Category) expected to fall in the range between 81.49-88.49, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for DEFROBCS Category with expected range of 55.89-71.83. You can check course wise expected MHT-CET 2026 cutoff for DEFROBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 85.26-88.49 | 81.49-88.49 |
| BE Electronics & Telecom Engineering | 55.89-59.92 | 55.89-71.83 |
| BE Robotics and Automation | 13.32-76.33 | 13.32-76.33 |
MES Pune MHT-CET Cutoff 2026 for GSTS Category
BE Computer Engineering Cutoff for MHT-CET (GSTS Category) expected to fall in the range between 30.69-30.69, which makes it the most in-demand course for MES Pune. Furthermore,BE Robotics and Automation is expected to be the second most preferred course for GSTS Category with expected range of 14.13-14.13. You can check course wise expected MHT-CET 2026 cutoff for GSTS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 30.69-30.69 | 30.69-30.69 |
| BE Robotics and Automation | 14.13-14.13 | 14.13-14.13 |
MES Pune MHT-CET Cutoff 2026 for PWDOPENS Category
BE Computer Engineering Cutoff for MHT-CET (PWDOPENS Category) expected to fall in the range between 68.63-68.63, which makes it the most in-demand course for MES Pune. Furthermore,BE Robotics and Automation is expected to be the second most preferred course for PWDOPENS Category with expected range of 26.17-26.17. You can check course wise expected MHT-CET 2026 cutoff for PWDOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 68.63-68.63 | 68.63-68.63 |
| BE Robotics and Automation | 26.17-26.17 | 26.17-26.17 |
MES Pune MHT-CET Cutoff 2026 for LNT1S Category
BE Computer Engineering Cutoff for MHT-CET (LNT1S Category) expected to fall in the range between 90.26-90.26, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LNT1S Category with expected range of 85.26-85.26. You can check course wise expected MHT-CET 2026 cutoff for LNT1S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 90.26-90.26 | 90.26-90.26 |
| BE Electronics & Telecom Engineering | 85.26-85.26 | 85.26-85.26 |
MES Pune MHT-CET Cutoff 2026 for LSTS Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LSTS Category) expected to fall in the range between 66.09-66.09, which makes it the most in-demand course for MES Pune. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LSTS Category with expected range of 19.99-19.99. You can check course wise expected MHT-CET 2026 cutoff for LSTS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 66.09-66.09 | 66.09-66.09 |
| BE Computer Engineering | 19.99-19.99 | 19.99-19.99 |
MES Pune MHT-CET Cutoff 2026 for LVJS Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LVJS Category) expected to fall in the range between 87.47-87.47, which makes it the most in-demand course for MES Pune. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LVJS Category with expected range of 86.83-86.83. You can check course wise expected MHT-CET 2026 cutoff for LVJS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 87.47-87.47 | 87.47-87.47 |
| BE Computer Engineering | 86.83-86.83 | 86.83-86.83 |
MES Pune MHT-CET Cutoff 2026 for GOBCH Category
BE Computer Engineering Cutoff for MHT-CET (GOBCH Category) expected to fall in the range between 91.45-93.46, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GOBCH Category with expected range of 79.47-90.41. You can check course wise expected MHT-CET 2026 cutoff for GOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 91.57-93.46 | 91.45-93.46 |
| BE Electronics & Telecom Engineering | 79.47-90.41 | 79.47-90.41 |
| BE Robotics and Automation | 54.91-88.77 | 54.91-88.77 |
| BE Mechanical Engineering | 6.95-79.7 | 6.95-82.84 |
MES Pune MHT-CET Cutoff 2026 for GOBCO Category
BE Computer Engineering Cutoff for MHT-CET (GOBCO Category) expected to fall in the range between 92.55-94.32, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GOBCO Category with expected range of 84.15-92.66. You can check course wise expected MHT-CET 2026 cutoff for GOBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 93.56-94.32 | 92.55-94.32 |
| BE Electronics & Telecom Engineering | 85.4-91.57 | 84.15-92.66 |
| BE Robotics and Automation | 80.45-90.41 | 73.57-90.59 |
| BE Mechanical Engineering | 25.03-80.35 | 25.03-83.72 |
MES Pune MHT-CET Cutoff 2026 for GOPENH Category
BE Computer Engineering Cutoff for MHT-CET (GOPENH Category) expected to fall in the range between 92.14-94.2, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GOPENH Category with expected range of 82.93-92.09. You can check course wise expected MHT-CET 2026 cutoff for GOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 92.93-93.95 | 92.14-94.2 |
| BE Electronics & Telecom Engineering | 82.93-91.36 | 82.93-92.09 |
| BE Robotics and Automation | 66.44-89.37 | 66.44-90.67 |
| BE Mechanical Engineering | 31.5-83.34 | 31.5-87.33 |
MES Pune MHT-CET Cutoff 2026 for GOPENO Category
BE Computer Engineering Cutoff for MHT-CET (GOPENO Category) expected to fall in the range between 92.87-94.63, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GOPENO Category with expected range of 85.6-93.46. You can check course wise expected MHT-CET 2026 cutoff for GOPENO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 94.03-94.63 | 92.87-94.63 |
| BE Electronics & Telecom Engineering | 86.52-92.04 | 85.6-93.46 |
| BE Robotics and Automation | 81.03-90.93 | 74.36-91.89 |
| BE Mechanical Engineering | 45.91-82.14 | 45.91-86.22 |
MES Pune MHT-CET Cutoff 2026 for GSCH Category
BE Computer Engineering Cutoff for MHT-CET (GSCH Category) expected to fall in the range between 82.87-87.7, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GSCH Category with expected range of 57.69-81.77. You can check course wise expected MHT-CET 2026 cutoff for GSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 82.87-85.57 | 82.87-87.7 |
| BE Electronics & Telecom Engineering | 57.69-81.77 | 57.69-81.77 |
| BE Robotics and Automation | 39.41-81.2 | 39.41-84.56 |
| BE Mechanical Engineering | 6.57-70.62 | 0.29-70.62 |
MES Pune MHT-CET Cutoff 2026 for GSCO Category
BE Computer Engineering Cutoff for MHT-CET (GSCO Category) expected to fall in the range between 86.14-90.53, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GSCO Category with expected range of 77.03-84.62. You can check course wise expected MHT-CET 2026 cutoff for GSCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 87.41-89.52 | 86.14-90.53 |
| BE Electronics & Telecom Engineering | 77.03-84.62 | 77.03-84.62 |
| BE Robotics and Automation | 63.77-84.87 | 63.77-84.87 |
| BE Mechanical Engineering | 1.16-68.96 | 1.16-74.93 |
MES Pune MHT-CET Cutoff 2026 for GSEBCH Category
BE Computer Engineering Cutoff for MHT-CET (GSEBCH Category) expected to fall in the range between 91.63-93.26, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GSEBCH Category with expected range of 86.78-91.31. You can check course wise expected MHT-CET 2026 cutoff for GSEBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 91.63-92.81 | 91.63-93.26 |
| BE Electronics & Telecom Engineering | 88.05-89.51 | 86.78-91.31 |
| BE Robotics and Automation | 77.54-79.65 | 77.54-88.19 |
| BE Mechanical Engineering | 63.54-76.76 | 63.54-77.54 |
MES Pune MHT-CET Cutoff 2026 for GSTH Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (GSTH Category) expected to fall in the range between 89.92-91.29, which makes it the most in-demand course for MES Pune. Furthermore,BE Robotics and Automation is expected to be the second most preferred course for GSTH Category with expected range of 16.74-88.96. You can check course wise expected MHT-CET 2026 cutoff for GSTH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 89.92-91.29 |
| BE Robotics and Automation | 16.74-16.74 | 16.74-88.96 |
| BE Mechanical Engineering | 7.13-54.18 | 7.13-81.04 |
| BE Computer Engineering | 3.19-24.72 | 3.19-93.26 |
MES Pune MHT-CET Cutoff 2026 for LOBCH Category
BE Computer Engineering Cutoff for MHT-CET (LOBCH Category) expected to fall in the range between 91.91-93.76, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LOBCH Category with expected range of 80.55-92.4. You can check course wise expected MHT-CET 2026 cutoff for LOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 91.91-93.57 | 91.91-93.76 |
| BE Electronics & Telecom Engineering | 80.55-91.31 | 80.55-92.4 |
| BE Robotics and Automation | 58.8-89.54 | 58.8-89.54 |
| BE Mechanical Engineering | 4.21-78.62 | 4.21-84.56 |
MES Pune MHT-CET Cutoff 2026 for LOPENH Category
BE Computer Engineering Cutoff for MHT-CET (LOPENH Category) expected to fall in the range between 92.6-95.51, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LOPENH Category with expected range of 83.24-93.03. You can check course wise expected MHT-CET 2026 cutoff for LOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 93.13-94 | 92.6-95.51 |
| BE Electronics & Telecom Engineering | 83.24-92.26 | 83.24-93.03 |
| BE Robotics and Automation | 68.29-90.87 | 68.29-92.26 |
| BE Mechanical Engineering | 32.34-84.14 | 32.34-84.14 |
MES Pune MHT-CET Cutoff 2026 for LOPENO Category
BE Computer Engineering Cutoff for MHT-CET (LOPENO Category) expected to fall in the range between 92.63-96.82, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LOPENO Category with expected range of 87.12-93.67. You can check course wise expected MHT-CET 2026 cutoff for LOPENO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 93.74-94.43 | 92.63-96.82 |
| BE Electronics & Telecom Engineering | 87.54-92.72 | 87.12-93.67 |
| BE Robotics and Automation | 71.97-92.08 | 71.97-92.08 |
| BE Mechanical Engineering | 20.36-81.58 | 20.36-82.83 |
MES Pune MHT-CET Cutoff 2026 for LOBCO Category
BE Computer Engineering Cutoff for MHT-CET (LOBCO Category) expected to fall in the range between 92.29-94.1, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LOBCO Category with expected range of 83.65-91.85. You can check course wise expected MHT-CET 2026 cutoff for LOBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 93.4-94.06 | 92.29-94.1 |
| BE Electronics & Telecom Engineering | 85.02-91.85 | 83.65-91.85 |
| BE Robotics and Automation | 59.52-91.31 | 59.52-91.31 |
| BE Mechanical Engineering | 18.45-81.2 | 12.2-83.49 |
MES Pune MHT-CET Cutoff 2026 for GNT2H Category
BE Computer Engineering Cutoff for MHT-CET (GNT2H Category) expected to fall in the range between 89.91-93.75, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GNT2H Category with expected range of 71.97-87.32. You can check course wise expected MHT-CET 2026 cutoff for GNT2H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 89.91-92.86 | 89.91-93.75 |
| BE Electronics & Telecom Engineering | 71.97-86.67 | 71.97-87.32 |
| BE Robotics and Automation | 54.17-87.32 | 51.24-87.32 |
| BE Mechanical Engineering | 30.01-75.65 | 30.01-78.42 |
MES Pune MHT-CET Cutoff 2026 for GNT3H Category
BE Computer Engineering Cutoff for MHT-CET (GNT3H Category) expected to fall in the range between 89.39-93.05, which makes it the most in-demand course for MES Pune. Furthermore,BE Robotics and Automation is expected to be the second most preferred course for GNT3H Category with expected range of 86-88.19. You can check course wise expected MHT-CET 2026 cutoff for GNT3H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 89.62-93.05 | 89.39-93.05 |
| BE Robotics and Automation | 88.19-88.19 | 86-88.19 |
| BE Electronics & Telecom Engineering | 71.97-90.14 | 71.97-90.67 |
| BE Mechanical Engineering | 23.12-75.21 | 9.51-81.13 |
MES Pune MHT-CET Cutoff 2026 for GNT3O Category
BE Computer Engineering Cutoff for MHT-CET (GNT3O Category) expected to fall in the range between 91.33-93.88, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GNT3O Category with expected range of 78.48-80.73. You can check course wise expected MHT-CET 2026 cutoff for GNT3O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 91.33-93.88 | 91.33-93.88 |
| BE Electronics & Telecom Engineering | 78.48-80.73 | 78.48-80.73 |
| BE Robotics and Automation | 75.13-75.13 | 75.13-79.81 |
| BE Mechanical Engineering | 3.35-75.4 | 3.35-81.13 |
MES Pune MHT-CET Cutoff 2026 for GSEBCO Category
BE Computer Engineering Cutoff for MHT-CET (GSEBCO Category) expected to fall in the range between 93.28-94.18, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GSEBCO Category with expected range of 90.41-91.31. You can check course wise expected MHT-CET 2026 cutoff for GSEBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 94.18-94.18 | 93.28-94.18 |
| BE Electronics & Telecom Engineering | 91.31-91.31 | 90.41-91.31 |
| BE Robotics and Automation | 89.99-89.99 | 87.59-90.11 |
| BE Mechanical Engineering | 79.7-79.7 | 72.5-83.44 |
MES Pune MHT-CET Cutoff 2026 for GVJH Category
BE Computer Engineering Cutoff for MHT-CET (GVJH Category) expected to fall in the range between 74.18-89.84, which makes it the most in-demand course for MES Pune. Furthermore,BE Robotics and Automation is expected to be the second most preferred course for GVJH Category with expected range of 51.26-77.06. You can check course wise expected MHT-CET 2026 cutoff for GVJH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 75.48-85.78 | 74.18-89.84 |
| BE Robotics and Automation | 77.06-77.06 | 51.26-77.06 |
| BE Electronics & Telecom Engineering | 48.06-84.32 | 48.06-84.32 |
| BE Mechanical Engineering | 40.65-52.81 | 9.36-60.07 |
MES Pune MHT-CET Cutoff 2026 for LSCH Category
BE Computer Engineering Cutoff for MHT-CET (LSCH Category) expected to fall in the range between 82.31-89.13, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LSCH Category with expected range of 54.12-84.48. You can check course wise expected MHT-CET 2026 cutoff for LSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 82.31-85.52 | 82.31-89.13 |
| BE Electronics & Telecom Engineering | 54.12-84.48 | 54.12-84.48 |
| BE Mechanical Engineering | 19.1-73.43 | 9.19-73.85 |
| BE Robotics and Automation | 6.95-84.87 | 6.95-84.87 |
MES Pune MHT-CET Cutoff 2026 for LSCO Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LSCO Category) expected to fall in the range between 70.72-84.64, which makes it the most in-demand course for MES Pune. Furthermore,BE Robotics and Automation is expected to be the second most preferred course for LSCO Category with expected range of 70.52-76.8. You can check course wise expected MHT-CET 2026 cutoff for LSCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 70.72-84.64 | 70.72-84.64 |
| BE Robotics and Automation | 76.8-76.8 | 70.52-76.8 |
| BE Computer Engineering | 85.85-90.52 | 48.05-90.52 |
| BE Mechanical Engineering | 39.05-67.22 | 11.11-67.22 |
MES Pune MHT-CET Cutoff 2026 for GNT1H Category
BE Computer Engineering Cutoff for MHT-CET (GNT1H Category) expected to fall in the range between 85.59-93.03, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GNT1H Category with expected range of 73.58-81.41. You can check course wise expected MHT-CET 2026 cutoff for GNT1H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 85.59-93.03 | 85.59-93.03 |
| BE Electronics & Telecom Engineering | 73.58-81.41 | 73.58-81.41 |
| BE Mechanical Engineering | 57.22-70.2 | 57.22-70.2 |
| BE Robotics and Automation | 56.58-75.35 | 56.58-75.35 |
MES Pune MHT-CET Cutoff 2026 for GNT2O Category
BE Computer Engineering Cutoff for MHT-CET (GNT2O Category) expected to fall in the range between 92.24-94.29, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GNT2O Category with expected range of 80.63-90.62. You can check course wise expected MHT-CET 2026 cutoff for GNT2O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 92.24-94.29 | 92.24-94.29 |
| BE Electronics & Telecom Engineering | 81.83-90.62 | 80.63-90.62 |
| BE Robotics and Automation | 35.69-80.54 | 35.69-80.54 |
| BE Mechanical Engineering | 15.1-78.17 | 15.1-80 |
MES Pune MHT-CET Cutoff 2026 for LSEBCH Category
BE Computer Engineering Cutoff for MHT-CET (LSEBCH Category) expected to fall in the range between 92.66-93.11, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LSEBCH Category with expected range of 87.5-91.7. You can check course wise expected MHT-CET 2026 cutoff for LSEBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 92.66-93.11 | 92.66-93.11 |
| BE Electronics & Telecom Engineering | 89.27-90.88 | 87.5-91.7 |
| BE Robotics and Automation | 82.22-85.51 | 82.22-85.51 |
| BE Mechanical Engineering | 45.58-80.78 | 45.58-80.78 |
MES Pune MHT-CET Cutoff 2026 for LSEBCO Category
BE Computer Engineering Cutoff for MHT-CET (LSEBCO Category) expected to fall in the range between 93.36-93.96, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LSEBCO Category with expected range of 90.44-91.32. You can check course wise expected MHT-CET 2026 cutoff for LSEBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 93.67-93.96 | 93.36-93.96 |
| BE Electronics & Telecom Engineering | 91.32-91.32 | 90.44-91.32 |
| BE Mechanical Engineering | 58.12-75.65 | 58.12-75.65 |
MES Pune MHT-CET Cutoff 2026 for GVJO Category
BE Computer Engineering Cutoff for MHT-CET (GVJO Category) expected to fall in the range between 87.63-94.62, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GVJO Category with expected range of 76.48-82.71. You can check course wise expected MHT-CET 2026 cutoff for GVJO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 89.87-94.62 | 87.63-94.62 |
| BE Electronics & Telecom Engineering | 76.48-82.71 | 76.48-82.71 |
| BE Mechanical Engineering | 72.1-72.1 | 69.49-72.1 |
MES Pune MHT-CET Cutoff 2026 for LNT2H Category
BE Computer Engineering Cutoff for MHT-CET (LNT2H Category) expected to fall in the range between 87.89-93.26, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LNT2H Category with expected range of 67.11-88.16. You can check course wise expected MHT-CET 2026 cutoff for LNT2H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 87.89-93.26 | 87.89-93.26 |
| BE Electronics & Telecom Engineering | 67.11-88.16 | 67.11-88.16 |
| BE Mechanical Engineering | 64.71-64.71 | 64.71-64.71 |
| BE Robotics and Automation | 73.27-73.27 | 43.12-73.27 |
MES Pune MHT-CET Cutoff 2026 for PWDOPENH Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (PWDOPENH Category) expected to fall in the range between 90.9-92.36, which makes it the most in-demand course for MES Pune. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for PWDOPENH Category with expected range of 35.93-81.04. You can check course wise expected MHT-CET 2026 cutoff for PWDOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 90.9-92.36 |
| BE Mechanical Engineering | - | 35.93-81.04 |
| BE Computer Engineering | 33.7-50.97 | 33.7-93.85 |
| BE Robotics and Automation | 2.66-2.66 | 2.66-90.04 |
MES Pune MHT-CET Cutoff 2026 for LNT1H Category
BE Computer Engineering Cutoff for MHT-CET (LNT1H Category) expected to fall in the range between 84.19-88.28, which makes it the most in-demand course for MES Pune. Furthermore,BE Robotics and Automation is expected to be the second most preferred course for LNT1H Category with expected range of 78.01-84.56. You can check course wise expected MHT-CET 2026 cutoff for LNT1H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 84.19-88.28 | 84.19-88.28 |
| BE Robotics and Automation | 84.56-84.56 | 78.01-84.56 |
| BE Electronics & Telecom Engineering | 77.64-84.04 | 77.64-87.56 |
MES Pune MHT-CET Cutoff 2026 for GNT1O Category
BE Computer Engineering Cutoff for MHT-CET (GNT1O Category) expected to fall in the range between 88.28-94.19, which makes it the most in-demand course for MES Pune. Furthermore,BE Robotics and Automation is expected to be the second most preferred course for GNT1O Category with expected range of 83.47-89.51. You can check course wise expected MHT-CET 2026 cutoff for GNT1O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 89.62-92.24 | 88.28-94.19 |
| BE Robotics and Automation | 86.23-87.69 | 83.47-89.51 |
| BE Electronics & Telecom Engineering | 78.42-87.57 | 78.42-87.57 |
MES Pune MHT-CET Cutoff 2026 for LNT2O Category
BE Computer Engineering Cutoff for MHT-CET (LNT2O Category) expected to fall in the range between 90.2-94.07, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LNT2O Category with expected range of 87.82-87.82. You can check course wise expected MHT-CET 2026 cutoff for LNT2O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 91.65-94.07 | 90.2-94.07 |
| BE Electronics & Telecom Engineering | 87.82-87.82 | 87.82-87.82 |
| BE Robotics and Automation | 84.14-84.14 | 78.67-84.14 |
MES Pune MHT-CET Cutoff 2026 for LVJH Category
BE Computer Engineering Cutoff for MHT-CET (LVJH Category) expected to fall in the range between 81.85-85.15, which makes it the most in-demand course for MES Pune. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for LVJH Category with expected range of 66.48-66.48. You can check course wise expected MHT-CET 2026 cutoff for LVJH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 82.37-85.15 | 81.85-85.15 |
| BE Mechanical Engineering | 66.48-66.48 | 66.48-66.48 |
| BE Robotics and Automation | 49.05-62.92 | 49.05-81.85 |
| BE Electronics & Telecom Engineering | 39.97-80.97 | 17.53-80.97 |
MES Pune MHT-CET Cutoff 2026 for LNT3H Category
BE Computer Engineering Cutoff for MHT-CET (LNT3H Category) expected to fall in the range between 87.41-90.89, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LNT3H Category with expected range of 72.15-85.44. You can check course wise expected MHT-CET 2026 cutoff for LNT3H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 88.99-90.89 | 87.41-90.89 |
| BE Electronics & Telecom Engineering | 85.21-85.44 | 72.15-85.44 |
| BE Robotics and Automation | 70.52-70.52 | 70.52-70.52 |
| BE Mechanical Engineering | - | 4.2-4.2 |
MES Pune MHT-CET Cutoff 2026 for LVJO Category
BE Computer Engineering Cutoff for MHT-CET (LVJO Category) expected to fall in the range between 80.09-80.09, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LVJO Category with expected range of 71.85-71.85. You can check course wise expected MHT-CET 2026 cutoff for LVJO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 80.09-80.09 | 80.09-80.09 |
| BE Electronics & Telecom Engineering | 71.85-71.85 | 71.85-71.85 |
| BE Robotics and Automation | 75.62-75.62 | 54.09-75.62 |
MES Pune MHT-CET Cutoff 2026 for GSTO Category
BE Robotics and Automation Cutoff for MHT-CET (GSTO Category) expected to fall in the range between 89.07-90.41, which makes it the most in-demand course for MES Pune. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for GSTO Category with expected range of 73.12-81.63. You can check course wise expected MHT-CET 2026 cutoff for GSTO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Robotics and Automation | - | 89.07-90.41 |
| BE Mechanical Engineering | - | 73.12-81.63 |
| BE Computer Engineering | 36.08-65.96 | 18.7-69.04 |
| BE Electronics & Telecom Engineering | 25.46-25.46 | 4.81-92.39 |
MES Pune MHT-CET Cutoff 2026 for LSTH Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LSTH Category) expected to fall in the range between 90.33-90.88, which makes it the most in-demand course for MES Pune. Furthermore,BE Robotics and Automation is expected to be the second most preferred course for LSTH Category with expected range of 89.17-89.17. You can check course wise expected MHT-CET 2026 cutoff for LSTH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 90.33-90.88 |
| BE Robotics and Automation | - | 89.17-89.17 |
| BE Mechanical Engineering | - | 74.12-82.45 |
| BE Computer Engineering | 3.9-47.35 | 3.9-47.35 |
MES Pune MHT-CET Cutoff 2026 for LSTO Category
BE Mechanical Engineering Cutoff for MHT-CET (LSTO Category) expected to fall in the range between 73.8-82.97, which makes it the most in-demand course for MES Pune. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LSTO Category with expected range of 4.81-59.92. You can check course wise expected MHT-CET 2026 cutoff for LSTO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Mechanical Engineering | - | 73.8-82.97 |
| BE Computer Engineering | 17.68-59.92 | 4.81-59.92 |
MES Pune MHT-CET Cutoff 2026 for LNT1O Category
BE Computer Engineering Cutoff for MHT-CET (LNT1O Category) expected to fall in the range between 86.62-86.62, which makes it the most in-demand course for MES Pune. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for LNT1O Category with expected range of 32.37-73.11. You can check course wise expected MHT-CET 2026 cutoff for LNT1O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 86.62-86.62 | 86.62-86.62 |
| BE Mechanical Engineering | 32.37-37.21 | 32.37-73.11 |
MES Pune MHT-CET Cutoff 2026 for ORPHAN Category
BE Computer Engineering Cutoff for MHT-CET (ORPHAN Category) expected to fall in the range between 93.75-93.75, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for ORPHAN Category with expected range of 90.75-91.4. You can check course wise expected MHT-CET 2026 cutoff for ORPHAN Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | - | 93.75-93.75 |
| BE Electronics & Telecom Engineering | - | 90.75-91.4 |
| BE Robotics and Automation | - | 88.77-89.84 |
| BE Mechanical Engineering | - | 73.89-81.94 |
MES Pune MHT-CET Cutoff 2026 for PWDOBCH Category
BE Computer Engineering Cutoff for MHT-CET (PWDOBCH Category) expected to fall in the range between 93.26-93.86, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for PWDOBCH Category with expected range of 89.17-91.13. You can check course wise expected MHT-CET 2026 cutoff for PWDOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | - | 93.26-93.86 |
| BE Electronics & Telecom Engineering | - | 89.17-91.13 |
| BE Robotics and Automation | - | 86.86-88.32 |
| BE Mechanical Engineering | - | 80.79-84.52 |
MES Pune MHT-CET Cutoff 2026 for DEFSCS Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (DEFSCS Category) expected to fall in the range between 80.6-83.54, which makes it the most in-demand course for MES Pune. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for DEFSCS Category with expected range of 61.33-72.38. You can check course wise expected MHT-CET 2026 cutoff for DEFSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 80.6-83.54 |
| BE Mechanical Engineering | - | 61.33-72.38 |
| BE Computer Engineering | 52.55-63.54 | 52.55-87.03 |
MES Pune MHT-CET Cutoff 2026 for PWDSCH Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (PWDSCH Category) expected to fall in the range between 78.27-82.48, which makes it the most in-demand course for MES Pune. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for PWDSCH Category with expected range of 66.48-67.82. You can check course wise expected MHT-CET 2026 cutoff for PWDSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 78.27-82.48 |
| BE Mechanical Engineering | - | 66.48-67.82 |
| BE Computer Engineering | 33.7-33.7 | 33.7-85.41 |
MES Pune MHT-CET Cutoff 2026 for LNT3O Category
BE Computer Engineering Cutoff for MHT-CET (LNT3O Category) expected to fall in the range between 85.18-91.74, which makes it the most in-demand course for MES Pune. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for LNT3O Category with expected range of 49.79-49.79. You can check course wise expected MHT-CET 2026 cutoff for LNT3O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 91.74-91.74 | 85.18-91.74 |
| BE Mechanical Engineering | 49.79-49.79 | 49.79-49.79 |
MES Pune MHT-CET Cutoff 2026 for DEFRNT1S Category
BE Computer Engineering Cutoff for MHT-CET (DEFRNT1S Category) expected to fall in the range between 88.44-88.44, which makes it the most in-demand course for MES Pune. You can check course wise expected MHT-CET 2026 cutoff for DEFRNT1S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 88.44-88.44 | 88.44-88.44 |
MES Pune MHT-CET Cutoff 2026 for DEFRSCS Category
BE Computer Engineering Cutoff for MHT-CET (DEFRSCS Category) expected to fall in the range between 68.38-70.92, which makes it the most in-demand course for MES Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for DEFRSCS Category with expected range of 35.13-35.13. You can check course wise expected MHT-CET 2026 cutoff for DEFRSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 68.38-70.92 | 68.38-70.92 |
| BE Electronics & Telecom Engineering | 35.13-35.13 | 35.13-35.13 |
Also Check:
Comments