Is JEE Main mandatory for BFIT B.Tech admission 2026?

No. JEE Main is not mandatory for BFIT B.Tech admission. The college selects primarily on Class 12 PCM marks and a Personal Interview. A valid JEE Main score may be submitted at the interview stage to qualify for a higher scholarship slab.

What is the minimum eligibility for BFIT Dehradun B.Tech 2026?

Candidates must have passed Class 12 with Physics, Chemistry, and Mathematics. General and OBC candidates need a minimum of 45%. SC and ST candidates need a minimum of 35%.

What is the BFIT Dehradun application and seat reservation fee?

BFIT charges INR 5,000 as a seat reservation fee at the time of confirming admission. This amount is non-refundable but is fully adjustable against the total programme fees during enrolment.

Does BFIT Dehradun give a 100% scholarship?

Yes. Students scoring above 90% in Class 12 qualify for a 100% tuition fee waiver under the BFIT Phase II merit scholarship scheme. Uttarakhand domicile students are separately eligible for a 100% tuition scholarship regardless of their Class 12 percentage.

Is CAT required for MBA admission at BFIT?

CAT is not mandatory. BFIT MBA admission is based on graduation marks and a Personal Interview. A CAT or MAT score presented at the interview can qualify the candidate for an enhanced merit scholarship at BFIT.

What is the selection process for BFIT Dehradun admission?

BFIT uses a two-stage selection process for all programmes. Class 12 or graduation marks carry 50% weightage. The Personal Interview carries the remaining 50%. Both stages are conducted by the college. No centralized counselling is involved.

Which university is BFIT Dehradun affiliated to?

BFIT B.Tech is affiliated to Uttarakhand Technical University (UTU) and is AICTE approved. Arts, science, management, and BCA/MCA programmes are affiliated to HNB Garhwal Central University. Diploma courses are approved by Uttarakhand Board of Technical Education (UBTER).

Can final year students apply for BFIT MBA 2026?

Yes. Students in their final year of graduation can apply provisionally for BFIT MBA. The seat is confirmed upon submission of the final degree mark sheet or provisional certificate before the academic session begins.

What documents are needed for BFIT Dehradun admission 2026?

Required documents include Class 10 and Class 12 mark sheets, character certificate, migration certificate, passport-size photographs, and caste or domicile certificate where applicable. Original documents are verified at the time of enrolment at the campus.

What is the last date to apply for BFIT Dehradun 2026?

BFIT follows a rolling admission model. There is no single fixed last date. Applications are accepted until seats are filled. Early application is strongly recommended as scholarship slabs are allotted based on merit at the time of application.

BFIT Dehradun B.Tech Additive Manufacturing: Fees 2026, Course Duration, Dates, Eligibility

Collegedunia Team

Content Curator | Updated 3+ months ago

The Bachelor of Technology [B.Tech] in Additive Manufacturing at BFIT Group of Institutions is a 4-year full-time undergraduate engineering program designed to equip students with expertise in advanced manufacturing technologies, particularly 3D printing and additive manufacturing processes. This specialization combines mechanical engineering, materials science, and digital design to prepare graduates for careers in modern manufacturing industries. The curriculum covers additive manufacturing technologies, CAD design, materials for 3D printing, quality control, and industrial applications of additive manufacturing. With a total fee of 2.8 lakhs for the entire 4-year duration and an annual tuition fee of 70,000, this course offers affordable quality engineering education. The program is affiliated with Uttarakhand Technical University [UTU] and is AICTE-approved, ensuring industry-recognized credentials. Additive Manufacturing is increasingly popular due to the revolutionary impact of 3D printing technology across aerospace, automotive, healthcare, and manufacturing sectors.

Admissions for B.Tech Additive Manufacturing at BFIT for the 2026-27 academic year are currently ongoing through the Uttarakhand Technical University [UTU] counselling process. The application and registration window is open from June 25, 2026 to July 21, 2026. Candidates who have qualified in the entrance examination can participate in the UTU counselling rounds. The admission process involves multiple phases with seat allotment and reporting dates spread across June and July 2026. Students must complete their registration and fee deposition within the specified timelines to secure their seats.

Key Points

Specialization in cutting-edge additive manufacturing and 3D printing technologies
Hands-on laboratory experience with modern 3D printing equipment and CAD software
Live projects and internships providing real-world exposure to industrial additive manufacturing
AICTE-approved program with UTU affiliation ensuring recognized credentials
Strong placement record with recruitment from leading manufacturing and technology companies
Affordable fee structure compared to other engineering colleges in Dehradun

4 Views Last Year

Official Link:

Go To Website

Highlights
Fees
Admission
Scholarships
Placements
FAQs

BFIT Dehradun Latest Updates and News

20 Apr, 2026 BFIT Dehradun B.Tech Additive Manufacturing Fee Structure 2026 is out. The total academic fee is ₹ 2.8 Lakhs.

BFIT B.Tech (Additive Manufacturing) Fees

The B.Tech Additive Manufacturing program at BFIT offers an affordable fee structure with a total tuition fee of 2.8 lakhs spread across the 4-year duration. The annual tuition fee is 70,000, making it approximately 17,500 per semester. In addition to tuition fees, students need to account for other charges including ERP (Enterprise Resource Planning), library and medical consultation fees, and internal examination fees. The hostel facility is available at an additional cost of 1.92 lakhs for the entire duration (optional). All fees are refundable as per the college's refund policy.

Fee Structure

Fee Component	Amount (INR)
Application Fee (One-time)	1,200
Admission Charges (One-time)	5,000
ERP (Per Year)	1,500
Library/Medical Consultation (Per Year)	4,800
Internal Exam Fee (Per Year)	4,000
Tuition Fee (Per Year)	70,000
Total Fees (1st Semester)	51,500
Total Fees (2nd Semester)	35,000
Total Fees (4 Years)	2,80,000
Hostel Fee (Optional, 4 Years)	1,92,000
Total with Hostel (Optional)	4,72,000

Transport charges are applicable if availed based on distance.
Uniform is compulsory and must be purchased from the college store.
Additional charges for Professional Development Program (PDP) services if availed.

BFIT B.Tech (Additive Manufacturing) Admission 2026

The admission process for B.Tech Additive Manufacturing at BFIT follows the Uttarakhand Technical University [UTU] counselling system. Eligible candidates who have qualified in the entrance examination can register for counselling and participate in the seat allotment process. The college conducts multiple phases of counselling to ensure all qualified candidates get an opportunity to secure admission. The process is transparent and merit-based, with seat allotment done through a computerized system.

College-Specific Important Dates

Event	Date
Online Registration & Fee Deposition - Phase 1	June 26-27, 2026
Choice Filling - Phase 1	June 26-28, 2026
Seat Allotment - Phase 1	July 3, 2026
Reporting at Allotted Institution - Phase 1	July 4-8, 2026
Online Registration & Fee Deposition - Phase 2	July 9-10, 2026
Choice Filling - Phase 2	July 9-11, 2026
Seat Allotment - Phase 2	July 15, 2026
Reporting at Allotted Institution - Phase 2	July 16-20, 2026
Online Registration & Fee Deposition - Phase 3	July 21-22, 2026
Overall Admission Timeline	June 26 - July 22, 2026

The dates mentioned above are tentative and subject to change.

Eligibility Criteria

Candidates must have passed 10+2 (Class XII) from a recognized board with Physics, Chemistry, and Mathematics as mandatory subjects
Minimum 50% aggregate marks in Physics, Chemistry, and Mathematics (45% for reserved category candidates as per norms)
Qualification in the relevant entrance examination as per Uttarakhand Technical University guidelines

Admission Process

Register on the UTU counselling portal with entrance examination score and required documents
Fill choice of colleges and courses during the choice-filling window
Participate in the computerized seat allotment process across multiple phases
Report at the allotted institution with original documents and fee payment within the specified dates
Complete document verification and hostel allocation (if applicable)
Register with the university and receive admission confirmation

BFIT B.Tech (Additive Manufacturing) Scholarships 2026

BFIT offers merit-based scholarships to deserving students based on their 12th standard performance. The scholarship structure is designed to support students with excellent academic records and those from economically weaker sections. Scholarships are applicable on the first-year tuition fee only and are subject to maintaining 75% attendance and 65% marks in internal examinations for continuation in subsequent years.

Scholarship Details

Merit Range	Scholarship on 1st Year Tuition Fee
Above 95%	60%
90% to 95%	50%
80% to 90%	20%
70% to 80%	10%

Additional Scholarships (5% extra on above merit scholarships)

Girl Child Scholarship: 5% additional scholarship for female students
Army Quota: 5% additional scholarship for children of armed forces personnel
Physically Disabled: 5% additional scholarship for students with disabilities
Defence Quota: 5% additional scholarship for defence personnel families
ST/SC Scholarship: 5% additional scholarship for Scheduled Tribe/Scheduled Caste students
Fatherless Student: 5% additional scholarship for students without father
Sports Quota: 5% additional scholarship for sports achievers

Scholarships are applicable on 1st year tuition fee only.
Continuation of scholarship in 2nd and 3rd years is subject to achieving 75% attendance and 65% marks in internal examinations.
For silver seats, first-year scholarship is applicable as per norms.

BFIT B.Tech (Additive Manufacturing) Placement 2026

BFIT Group of Institutions has established strong placement records with over 563+ recruitment partners and successful placements of 19,000+ students across various industries. The college's placement cell actively engages with leading companies in manufacturing, aerospace, automotive, and technology sectors. Students specializing in Additive Manufacturing are recruited for roles including Manufacturing Engineers, Process Engineers, Design Engineers, and Quality Engineers. The college provides comprehensive placement training including mock interviews, technical skill development, and soft skills training to prepare students for industry requirements. Major recruiters include companies like Tata, Nestle, Himalaya, Intel, Infosys, Wipro, HCL, Accenture, and Cipla.

Placement Statistics

Metric	Details
Total Recruiters	563+
Students Placed	19,000+
Average Package	Competitive (varies by specialization)
Highest Package	Varies by year and company
Placement Rate	Strong (varies by branch)
Core Companies	Tata, Nestle, Himalaya, Intel, Infosys, Wipro, HCL, Accenture, Cipla
Job Roles	Manufacturing Engineer, Process Engineer, Design Engineer, Quality Engineer

BFIT B.Tech (Additive Manufacturing) FAQs

Ques. What is Additive Manufacturing and how is it different from traditional manufacturing?

Ans. Additive Manufacturing, also known as 3D printing, builds objects layer by layer from digital designs, while traditional manufacturing removes material. Additive Manufacturing is more efficient for complex designs, reduces waste, and enables rapid prototyping. This specialization teaches both technologies and their applications.

Ques. What career opportunities are available after B.Tech Additive Manufacturing from BFIT?

Ans. Graduates can pursue careers as Manufacturing Engineers, Process Engineers, Design Engineers, Quality Engineers, and Research Engineers in industries like aerospace, automotive, healthcare, electronics, and consumer goods. Many also pursue higher studies in M.Tech or MBA programs.

Ques. Is the hostel facility mandatory for B.Tech Additive Manufacturing students at BFIT?

Ans. No, hostel facility is optional. Students can choose to stay in the hostel at an additional cost of 1.92 lakhs for the entire 4-year duration or arrange their own accommodation.

Ques. What practical exposure does the Additive Manufacturing program provide?

Ans. The program includes hands-on laboratory work with 3D printers and CAD software, live projects with real-world industrial applications, and internship opportunities during the course duration. Students work on practical implementations of additive manufacturing concepts and design optimization.

Ques. How does BFIT's placement record compare for Additive Manufacturing graduates?

Ans. BFIT has a strong placement record with 563+ recruitment partners. Additive Manufacturing graduates are actively recruited by leading companies in manufacturing and technology sectors. The college provides comprehensive placement training and mock interviews to prepare students.

Ques. What entrance examination is required for admission to B.Tech Additive Manufacturing at BFIT?

Ans. Admission is based on performance in the entrance examination as per Uttarakhand Technical University [UTU] guidelines. Candidates must qualify in the relevant entrance exam and participate in the UTU counselling process for seat allotment.

Course Finder

Search from 20K+ Courses and 35+ Streams