Ulster University BS Technology with Design 2026:Admission,Fees,Scholarship and Placement

Ulster University Technology with Design Fees and Living Costs 2027

September 2027 tuition status: the Technology with Design course page says its 2027/28 fee will be announced in due course. The institution-wide rate and the prior course rate are shown separately so Indian applicants do not mistake a category reference for a confirmed invoice.

All INR conversions in the article use a conversion rate of GBP 1 = INR 128.16 as of 21 August 2026. Rates fluctuate daily, verify before applying.

Fee action: Ulster’s target course page does not confirm the 2027/28 Technology with Design tuition. Verify the target fee on the official 2027/28 fee page and wait for the course invoice.

The 2026/27 course page lists GBP 17,490 per year (INR 22.42 Lakhs) for international students, but that amount remains a prior-cycle reference. The target course page also warns that placement or study-abroad periods can create additional tuition, travel and living costs.

A prior-cycle planning illustration assumes four years at GBP 17,490 per year, giving GBP 69,960 (INR 89.66 Lakhs) in tuition. Adding four years of official living costs from GBP 5,500 (INR 7.05 Lakhs) to GBP 7,500 (INR 9.61 Lakhs) gives a four-year total. The resulting total is GBP 91,960 (INR 1.18 Crore) to GBP 99,960 (INR 1.28 Crore), excluding visa, travel and placement-specific costs.

Source: Ulster University 2027/28 fee guidance and the official 2026/27 Technology with Design course page.

• The GBP 18,030 category rate is a planning reference because the course page has not confirmed the Technology with Design amount.
• The GBP 17,490 course fee belongs to 2026/27 and cannot be used as the September 2027 invoice.
• Keep a separate reserve for the compulsory placement year because its tuition and travel arrangement are not specified on the target course page.

Cost of Living in Belfast for Technology with Design Students

Ulster’s official international student guide gives a combined annual estimate of GBP 5,500 (INR 7.05 Lakhs) to GBP 7,500 (INR 9.61 Lakhs). The guide does not publish a rent, food or transport breakdown for this course, so the table keeps the estimate combined.

The monthly figures divide Ulster’s annual range by twelve, so they are calculated planning values rather than a separate university monthly quote. A Belfast university residence reference starts from GBP 164 per week (INR 21,018), with a GBP 100 booking fee (INR 12,816).

Residence pricing and the combined university estimate answer different budgeting questions. Confirm the accommodation contract, placement travel and any equipment needs before converting the planning range into a loan requirement.

Check Out: UK accommodation and living costs

Key insight: Ulster publishes a Belfast living range but not the Technology with Design 2027/28 tuition. Treat the four-year total as a prior-cycle planning illustration and verify the placement-year fee structure.

Ulster University Technology with Design Admission 2027

Admission to Technology with Design requires an international A-level equivalent of Grades CCC or higher, with course-aligned subjects where required. Indian applicants must also meet Ulster’s country route of 60% overall in Standard XII and 60% in five subjects.

The course page specifies Mathematics and English at General Certificate of Secondary Education (GCSE) grade C or 4 for the United Kingdom route. Indian applicants should have their subject combination checked because the published country baseline does not replace a course-specific subject condition.

Academic Eligibility for Indian Applicants

Ulster assesses international qualifications individually, so the table combines the course standard with the closest published Indian pathway. The Indian figures are entry routes, not a universal conversion of United Kingdom grades.

Subject evidence matters: the course asks for a Grade B in one relevant United Kingdom A-level subject, while Indian applicants should show 60% in each required Standard XII subject.

Ulster may verify qualifications through Qualification Check when it cannot complete verification itself. Keep official mark sheets and subject descriptions ready because the university can request additional evidence after submission.

The course page does not list a work-experience, portfolio or admission-test threshold. Selection therefore turns on academic suitability, English evidence and the completeness of the international application.

English Language Requirements

The course requires IELTS (International English Language Testing System) Academic 6.0 overall, with no band below 5.5. This is the course-specific requirement rather than a higher nursing or health-science threshold.

Ulster accepts alternative tests, but each route has separate validity and component rules. The Test of English as a Foreign Language internet-based test (TOEFL iBT), Pearson Test of English Academic (PTE Academic) and Duolingo English Test (DET) are listed separately. Their scores are not interchangeable without Ulster’s published mapping.

The Standard XII English route maps to IELTS 6.0, which matches this course’s minimum. Applicants below 70% English should budget for an accepted test because the country route cannot be assumed.

• Keep Standard XII overall, five-subject and English percentages in separate checks because Ulster applies them to different entry decisions.
• Highlight Mathematics and the relevant science, engineering or technology subject in the transcript because the course publishes a subject-specific requirement.
• For TOEFL taken after 21 January 2026, report the 1.0 to 6.0 scale exactly and verify the four component scores.

Tip for Indian students: The 60% academic route is only the starting point. Confirm the relevant Standard XII subject, meet IELTS 6.0 or its accepted equivalent and keep qualification evidence ready for verification.

Ulster University Technology with Design Application 2027

Ulster has announced the September 2027 Technology with Design intake, but the direct international application window and decision date are not published for 2027/28.

Indian applicants must use the international route because the course page directs applicants outside the United Kingdom and Ireland away from the domestic Universities and Colleges Admissions Service (UCAS) route. Ulster also states that places are confirmed subject to course capacity and the completed admission process.

Application Sequence for September 2027

The application sequence is clear even though the target dates are incomplete. Prepare academic and English evidence, submit through the international portal when it opens, then complete any conditions listed in the offer.

Deadline status: the checked international application page does not publish a 2027/28 direct deadline or decision date. Its latest dated reference is Friday 7 August 2026 for September 2026, with no published cutoff time, so treat that date as tentative prior-cycle context.

Use the official international application page to verify the target opening, deadline, offer conditions and deposit instructions when Ulster updates the cycle.

How Indian Applicants Should Stage the Work

Qualification verification can become a separate step when Ulster cannot verify documents directly. Keep final transcripts, subject descriptions, English results and identity documents consistent across every upload.

• Prepare Standard XII evidence showing 60% overall, 60% in five subjects and the relevant Mathematics or technology subject.
• Secure IELTS Academic 6.0 with no band below 5.5 or an accepted equivalent before the target submission.
• Check the international portal for capacity because Ulster says courses may close when available places are filled.
• Ask how the compulsory placement year affects deposit timing, tuition liability and visa documents before accepting the offer.

Applicants choosing between Technology with Design and Ulster’s Mechanical Engineering degree should note the different emphasis. Technology with Design combines product design and marketplace awareness with engineering, while the Mechanical Engineering degree centres on engineering systems, design and manufacture.

Application tip: The September 2027 intake is announced, but the direct international deadline is unpublished. Treat the prior-cycle date as tentative and verify the portal before submitting or paying.

Ulster University Technology with Design Scholarships 2027

Ulster’s current published policy lists a Global Excellence Scholarship and a Standard Country Scholarship for eligible international students at Northern Ireland locations.

The awards are assessed automatically at offer stage, and only one scholarship can be used per application. The policy does not name the September 2027 intake or publish a separate scholarship deadline.

Published-cycle context: these are current published scholarship values, not confirmed September 2027 awards. Confirmation appears in the updated offer letter.

The course page also points to Faculty Prizes for students during their studies. Their values and eligibility are not published on the checked course page, so they should not enter an arrival funding plan.

Since the Technology with Design tuition is unpublished for 2027/28, no award can be converted into a target-cycle net fee. Wait for the course invoice and the scholarship wording in the offer letter before reducing the loan amount.

• Submit complete academic evidence because the automatic assessment occurs at the offer stage rather than through a separate scholarship form.
• Use one confirmed award in the funding plan because Ulster states that scholarships are not cumulative.
• Ask Ulster to confirm how the Standard Country award treats the compulsory placement year before relying on Years 2 to 4.

Read More: Ulster University scholarships

Scholarship reality: Ulster offers automatic assessment for two published award routes, but the September 2027 cycle is unnamed. Secure the course fee and written award confirmation before revising the funding plan.

Ulster University Technology with Design Salary 2027

No course-specific salary or employment rate is published for Technology with Design. The target course page does describe a compulsory, normally paid Year 3 placement and names employers including Accenture, Collins Aerospace, Denroy, Stryker and Terex Finlay.

Those employer examples show reported destinations, not placement volume or a typical graduate outcome. The course lists product designer, design engineer, manufacturing engineer, mechanical design engineer and product support engineer among possible roles.

The course page lists accreditation by the Institution of Engineering Designers, Institution of Mechanical Engineers and Institution of Engineering and Technology on behalf of the Engineering Council. It also says professional body accreditation is being renewed, so verify the status for your intake.

Course Outcome Evidence and Salary Scope

The closest published earnings data comes from Discover Uni proxies for other Ulster courses. The figures are useful for scenario planning, but they do not establish the salary of a Technology with Design graduate.

Scope warning: the course-specific record is too small for a published salary or employment rate. The table therefore labels each wider proxy beside its cohort and response count.

Source: Discover Uni course data and Graduate Outcomes survey.

Discover Uni also reports 95% working or studying for the Ulster Engineering proxy, based on 30 respondents with a 60% response rate. Design studies reports 88% working or studying across 175 respondents with a 51% response rate, but neither figure is course-specific.

Gross salary is not take-home pay because tax and location change disposable income. Use a current United Kingdom tax calculator before estimating the amount available for loan repayment or family support.

Return on Investment for Indian Applicants

Because the 2027/28 course tuition is unpublished, a target-cycle payback calculation would be unreliable. Use the verified course structure and specified salary proxies to assess risk instead.

• The four-year course includes a compulsory Year 3 placement that is normally paid, but pay and tuition treatment are unpublished, so request written placement terms.
• The course lists employer examples but no offer rate, so treat placement access as an opportunity and test funding without assumed employment.
• The Engineering proxy median is GBP 29,000 (INR 37.17 Lakhs), while Design studies is GBP 24,000 (INR 30.76 Lakhs), so model repayment against the lower figure.
• The course develops product design, manufacturing and computer-aided engineering skills, so an India-return plan should identify target roles before accepting the four-year cost.
• The Graduate Route offers an 18-month window from 2027, but each Skilled Worker role must satisfy current occupation and salary rules before a host-country plan is relied upon.

ROI reality: Technology with Design offers a compulsory placement and named employer examples, but no course-level salary rate. Use the lower published proxy for planning and verify placement terms before committing.

UK Visa for Ulster University Technology with Design Students 2027

Indian students need a United Kingdom Student visa for this full-time undergraduate course. The application fee is GBP 558 (INR 71,513), and the Immigration Health Surcharge (IHS) is GBP 776 (INR 99,452) per year.

The separate Student visa maintenance requirement outside London is GBP 1,171 per month (INR 1.50 Lakhs) for up to nine months. The permitted total is GBP 10,539 (INR 13.51 Lakhs), which must not replace Ulster’s official Belfast living estimate.

Read the United Kingdom government Student visa rules before applying because fees, evidence and dependant conditions can change.

• Students can normally work up to 20 hours per week during term, but placement attendance and study requirements should remain the priority.
• The Graduate Route gives eligible graduates an 18-month post-study work window for applications from 2027, so plan a job-search transition before it expires.
• The general Skilled Worker salary threshold is GBP 41,700 (INR 53.44 Lakhs), so verify the occupation code and offered salary for each role.
• A qualifying Skilled Worker settlement route generally requires five years, while undergraduate dependants are generally restricted unless a government-sponsored exception applies.

The four-year course includes a placement year, but visa permission and placement arrangements must be checked against the offer and sponsorship documents. Do not assume a normally paid placement creates a post-study work route.

Check Out: UK Student visa requirements

Visa reality: The 18-month Graduate Route creates a defined post-study window from 2027, but a four-year placement route still needs separate funding, visa and Skilled Worker planning.

Ulster University Technology with Design Ranking 2027

Times Higher Education (THE) places Ulster University Engineering in the 601st to 800th global band in its 2026 subject results. The ranking covers a broad Engineering discipline rather than the Technology with Design course alone.

This subject band can provide context for engineering-focused applicants, but it does not measure the course’s compulsory placement, product-design curriculum or individual employment prospects. Use the curriculum and placement evidence as the more direct fit test.

Read More: Ulster University rankings

Honest take: Ulster has a published Engineering subject band, but no course-specific ranking. Treat the result as background context and decide from the course’s curriculum, placement and funding evidence.