Queen Mary, University of London BS Mechanical Engineering 2026:Admission,Fees,Scholarship and Placement

Queen Mary Mechanical Engineering Bachelor of Science (B.S.) is listed as a three-year, full-time undergraduate programme for September 2027 at Main Site, Mile End Campus, London. Queen Mary’s current 2027 page and UCAS listing identify the matching route as Mechanical Engineering BEng (Hons), with AAB including Mathematics and Physics or Chemistry. September 2027 tuition is unpublished; 2026-27 overseas tuition was GBP 32,950 per year (INR 43.01 Lakhs), as a prior-cycle reference.

Queen Mary’s India table maps AAB to approximately 80% for CBSE or ISC, 75% for West Bengal and 85% for other listed boards. The curriculum develops design, experimental, computational and mathematical engineering skills through materials, fluid mechanics, thermodynamics, control and sustainability. It suits applicants comfortable with laboratory work and technical reporting, while the BEng only partially meets the academic requirements for Chartered Engineer registration.

• Professional accreditation by the Royal Aeronautical Society and Institution of Mechanical Engineers gives the engineering route a defined professional benchmark.
• Final-year options include future vehicles, renewable-energy electrical systems, robotic control, heat exchange and failure of materials.
• Formal teaching is planned at 14 to 17 hours weekly, followed by independent study and group project work.

Also Check: Queen Mary Mechanical Engineering Admission

Queen Mary Mechanical Engineering Fees and Living Costs 2027

September 2027 overseas tuition for the standard three-year route is unpublished. Queen Mary’s latest official 2026-27 page lists GBP 32,950 per year (INR 43.01 Lakhs) as the prior-cycle reference.

Target fee verification: The checked 2027 course page says fees for 2027-28 have not yet been set. Verify the target amount on the official 2027 Mechanical Engineering fee page before accepting an offer or fixing a loan ceiling.

Prior-cycle fee context: The table applies to the standard H300 Mechanical Engineering BEng route and is not a confirmed September 2027 price.

All INR conversions in the article use a conversion rate of GBP 1 = INR 130.52 as of 23 August 2026. Rates fluctuate daily, verify before applying.

Source: Queen Mary’s official 2026 and 2027 Mechanical Engineering course pages.

• The unpublished 2027-28 fee means an education-loan sanction should include a buffer and be revisited when the overseas rate appears.
• Three years at the prior-cycle annual figure equal GBP 98,850 (INR 1.29 Crore), but that total is not a confirmed target-cycle tuition cost.
• The London living estimate and Student visa maintenance requirement serve different purposes, so keep both amounts in separate planning lines.

Cost of Living in London for Mechanical Engineering Students

Queen Mary estimates total life in London at GBP 1,334 per month (INR 1.74 Lakhs), including housing, food and travel. The latest published estimate is for 2025-26 and remains a planning benchmark.

Queen Mary separately publishes residential fees of GBP 172 to GBP 430 per week (INR 22,449 to INR 56,124) for 2025-26. This range is accommodation context, not an extra cost to add to the combined estimate automatically.

Prior-cycle planning illustration: Three years of the 2026-27 tuition reference equal GBP 98,850 (INR 1.29 Crore). Thirty-six months at the published living estimate equal GBP 48,024 (INR 62.68 Lakhs).

Adding those two prior-cycle components produces GBP 146,874 (INR 1.92 Crore) before visa charges, travel, deposits and personal costs. This is a prior-cycle planning illustration, not a target-cycle total.

Also Check: UK accommodation and living costs

Key insight: The 2027-28 tuition remains unpublished, so the prior-cycle budget should guide loan scenarios only. Reprice the full budget when Queen Mary releases the international fee.

Queen Mary Mechanical Engineering Admission 2027

Direct entry to the matching standard H300 route requires AAB at A level, including Mathematics and Physics or Chemistry. The live university page also requires English and Mathematics at GCSE grade C or 4, or an acceptable equivalent.

For Indian Standard XII applicants, Queen Mary’s official equivalence maps AAB to 80% for CBSE or ISC, 75% for West Bengal and 85% for other listed boards. The published percentages are approximate guidance, and the university makes the final equivalency decision.

Academic eligibility: The table applies to the regular three-year route, not the foundation, industrial-experience, year-abroad or integrated Master of Engineering variants.

Queen Mary also publishes contextual offers of BBB or BBC with the required Mathematics and science subjects for eligible applicants. Indian applicants should confirm whether their circumstances can be assessed under those criteria rather than assuming the lower grades apply automatically.

English Language Requirements

The School of Engineering and Materials Science undergraduate route uses English Band 3. IELTS, TOEFL, PTE and selected Indian school-English qualifications are accepted, but every component minimum must be met.

The Test of English as a Foreign Language Internet-based Test (TOEFL iBT) appears on separate scales by test date. Queen Mary does not accept MyBest scores, so report the scale and component results exactly as issued.

Band 3 score context: The figures below are minimum English thresholds, not competitive academic targets; check Queen Mary’s accepted English tests and qualifications page before booking.

• Check Mathematics, Physics or Chemistry and the board-specific percentage together because an overall percentage cannot replace the subject combination.
• Choose an English route early enough to retake a component before 13 January 2027 if one score falls below Band 3.
• Applicants with eligible CBSE, ISC or listed State Board English marks should verify that route before paying for an additional test.

The course begins with mathematical modelling, materials, experimental design, fluid mechanics and thermodynamics. Applicants who have practised calculus, mechanics, laboratory reporting and technical communication will be better prepared for the assessment mix.

Tip for Indian students: Use the official AAB equivalence and Band 3 English rules together. A strong overall percentage cannot compensate for missing Mathematics, Physics or Chemistry evidence.

Queen Mary Mechanical Engineering Application 2027

September 2027 applications use the Universities and Colleges Admissions Service (UCAS), with Queen Mary institution code Q50 and H300 for the standard route. Completed applications can be submitted from 1 September 2026.

The standard route lists one start date, September 2027, and no January or Summer intake. The equal-consideration deadline is 13 January 2027 at 18:00 UK time, or 23:30 IST.

Application charge: The 2027 UCAS fee is GBP 34.50 (INR 4,503) for up to five university or college choices. This charge is separate from Queen Mary tuition and visa costs.

Forward-looking September 2027 application stages

Submit by the January deadline to preserve equal consideration, then use the published decision and reply dates to organise funding and visa evidence.

Published 2027 timetable: UK time controls the portal cutoff, with Indian Standard Time (IST) shown beside each timed deadline.

Late UCAS dates do not guarantee a Queen Mary place because the provider may stop accepting applications after available places are filled. The January submission is therefore the safer working target for Indian applicants.

The curriculum rewards evidence of mathematical problem-solving, practical projects and technical communication. Use the personal statement and reference to connect those experiences with design, modelling, laboratory work and sustainable engineering.

• Use Q50 for Queen Mary and H300 for the standard route because the official page warns that changing course selection later may not be possible.
• Complete the AAB subject evidence and English route before 13 January 2027 so document verification does not weaken the application.
• Keep the 18:00 UK cutoff and its IST conversion in your calendar because the university timezone controls the portal.
• Treat Extra and Clearing as availability-dependent routes rather than replacements for the equal-consideration application.

Read More: UCAS application guide for UK universities

Application tip: Prepare the H300 application before 1 September 2026 and submit by 13 January 2027 at 23:30 IST. Confirm the award title and course code before paying the UCAS fee.

Queen Mary Mechanical Engineering Scholarships 2027

September 2027 scholarship terms are unpublished for the standard international route. The named schemes below are planning references only, and each requires a specific applicant profile.

Queen Mary’s latest published undergraduate awards cover September 2026 or operate without a stated cycle. Do not deduct any award from the unpublished 2027-28 tuition until the university confirms the amount and eligibility in writing.

Published award context: The table keeps the award cycle, route and renewal condition visible so applicants do not mistake a prior-cycle maximum for assured funding.

The Global Talent amount is published per academic year, but its maximum is worded for a standard four-year degree. Do not calculate a three-year course award from that maximum.

The alumni award is useful only when the family condition can be verified, while the Kaplan award requires a named progression route. Neither scheme establishes a September 2027 entitlement for the supplied course record.

• Fund the degree at gross tuition until Queen Mary publishes the 2027-28 award terms and confirms your overseas fee status.
• Check the Global Talent academic condition separately because its published requirement exceeds the standard AAB offer.
• Use the Children of Alumni or Kaplan routes only when the family or progression evidence can be supplied before enrolment.

Scholarship timing matters because the main UCAS submission deadline is 13 January 2027, while the current named awards do not publish a 2027 application deadline. Keep a full-fee funding plan ready and treat later confirmation as upside.

Read More: UK scholarships for Indian students

Scholarship reality: The strongest direct-entry reference is a 2026/27 award requiring grades above AAB. Apply on the course fit and verify any 2027 award before treating it as tuition relief.

Queen Mary Mechanical Engineering Salary 2027

The latest outcome record for the matching standard Mechanical Engineering route reports median earnings of GBP 30,000 (INR 39.16 Lakhs) 15 months after the course. The same cohort reports 85% in work or study, but neither figure guarantees an individual job or salary.

The salary measure is a course-cohort outcome for 2022-23 graduates, while the longer-term figures use a broader Mechanical Engineering grouping. The small response base makes scope and cohort labels essential for Indian applicants.

Course-cohort outcome evidence: The table separates activity, salary and occupation measures because they answer different employment questions.

Queen Mary lists recent destinations including Alstom, Arcadis, Atkins, Jaguar Land Rover, Jacobs Engineering, Mott MacDonald and Wood Group. These reported destinations show possible directions, not recruiter volume or placement probability.

Published Salary Benchmarks

The 15-month salary range for the matching Queen Mary Mechanical Engineering record is GBP 28,000 to GBP 34,000 (INR 36.55 Lakhs to INR 44.38 Lakhs). The later measures use graduates from 2015-17 and a Longitudinal Education Outcomes dataset.

Source: Discover Uni Mechanical Engineering outcomes; figures retain the published cohort, response rate and grouping.

Student Experience Evidence

Official student evidence is mixed across course organisation and assessment, although learning resources and academic support score more positively. The figures below come from 45 students graduating in 2024-25, representing 65% of those asked.

Professional ROI for Indian Applicants

Return on investment (ROI) means testing verified cost against career evidence, not predicting a payback period. The target tuition and exact target-course salary are not published, so a responsible payback calculation is unavailable.

• The prior-cycle three-year tuition illustration is GBP 98,850 (INR 1.29 Crore), so wait for the 2027-28 fee before fixing the loan ceiling.
• Thirty-six months of living costs add GBP 48,024 (INR 62.68 Lakhs), producing a GBP 146,874 (INR 1.92 Crore) prior-cycle illustration.
• The course-cohort median is GBP 30,000 gross after 15 months, so model tax, rent and location before comparing it with loan instalments.
• The 85% work-or-study result covers 40 students, while the salary measure covers 15 people, so use both as limited evidence rather than a placement rate.
• The Graduate Route lasts 18 months for applications from 1 January 2027, so identify likely sponsored roles before relying on a UK job-search plan.

Gross salary is not take-home pay because tax, pension, location and deductions change repayment capacity. Use a current UK tax calculator when testing a specific offer.

Applicants returning to India should value the degree for engineering knowledge, projects and professional accreditation rather than converting a UK gross benchmark directly into Indian repayment capacity. Applicants seeking UK work should weigh the partial Chartered Engineer route against the separate MEng option.

ROI reality: The matching course record shows useful early-career evidence, but small samples and unpublished 2027 tuition prevent a payback claim. Confirm the fee and award title before releasing a loan.

UK Visa for Queen Mary Mechanical Engineering Students 2027

Indian students need a UK Student visa for this full-time undergraduate route after Queen Mary issues a Confirmation of Acceptance for Studies (CAS). CAS is the university sponsorship reference, and the current application fee is GBP 558 (INR 72,830).

The Immigration Health Surcharge (IHS) is GBP 776 per year (INR 1.01 Lakhs) for students. Check the current UK Student visa rules before applying because government fees and evidence requirements can change.

• London maintenance evidence is GBP 1,529 per month (INR 2.00 Lakhs) for nine months, separate from Queen Mary’s GBP 1,334 monthly estimate (INR 1.74 Lakhs).
• A degree-level Student visa generally permits 20 hours of work weekly during term, while the Graduate Route offers 18 months for applications from 1 January 2027.
• The Graduate Route costs GBP 937 (INR 1.22 Lakhs) plus IHS of GBP 1,035 yearly (INR 1.35 Lakhs), so budget both after graduation.
• Skilled Worker eligibility normally requires an approved employer and GBP 41,700 salary (INR 54.43 Lakhs) or the higher going rate, with settlement normally after five qualifying years.
• Undergraduate Student visa dependants are generally restricted, although the government-sponsored student exception may apply when its conditions are met.

Check Out: UK Student visa requirements

Visa reality: The 18-month Graduate Route creates a limited job-search window, not a sponsorship guarantee. Keep visa charges, maintenance funds and the Skilled Worker salary test in the financial model.