Texas A&M University Admissions 2027: Deadlines, Eligibility, Fees & Acceptance Rate

Texas A&M University Application Deadlines for Indian Students

Texas A&M’s primary intake is the Fall semester (starting August each year), when the largest number of programmes open. Undergraduate applications are submitted through the Common Application or ApplyTexas; graduate engineering programmes use a two-portal system (Texas A&M application plus EngineeringCAS). Per the Texas A&M international admissions page, applications for Fall 2027 opened 1 August 2026.

Texas A&M University’s primary intake for Indian students is the Fall semester (August 2027) — most programmes open here.

Engineering graduate applicants pay two separate fees: the USD 90 (INR 8,582) Texas A&M application fee and a USD 58 (INR 5,531) EngineeringCAS fee, totalling USD 148 (INR 14,112). Non-engineering graduate programmes require the USD 90 TAMU fee only. The Full-Time MBA Spring 2027 international deadline of 15 August 2026 is within two weeks; apply immediately if targeting that entry point.

TAMU Eligibility for International Students

Texas A&M uses holistic review for undergraduate admission and a minimum 3.0 GPA standard for graduate programmes. There is no stated minimum Class XII percentage for UG applicants; instead, the university considers the full academic record, course rigour, and activities. Graduate applicants from Indian universities must convert their percentage to the 4.0 GPA scale: a 3.0 GPA corresponds to around 75% in most Indian grading systems.

TAMU Undergraduate Eligibility

• Academic record: Class XII or equivalent with a strong academic record; no minimum percentage stated
• Standardised tests: SAT and ACT are optional; submission does not create advantage or disadvantage
• ETAM note: Engineering applicants enter the College of Engineering and apply for their specific major (such as ECE or Mechanical) in Year 2 via the Entry to a Major process, known as ETAM
• English proficiency: IELTS Academic 6.0 minimum or equivalent (see table below)

TAMU Graduate Eligibility

• Academic: Bachelor’s degree from a recognised institution; minimum 3.0 GPA on a 4.0 scale (around 75% in Indian universities)
• GRE: Optional for most engineering MS programmes; CS recommends submission if GPA is below 3.5
• English proficiency: IELTS Academic 6.0 or equivalent (see table below)

Texas A&M English Proficiency Tests and Minimums

Note on TOEFL scoring: ETS introduced a revised TOEFL iBT scoring system from 21 January 2026. Scores from tests taken before that date retain the previous 0-120 scale and a minimum of 80; scores from tests taken on or after that date use the new scale, where Texas A&M requires at least 4.5 overall with 4.0 on each section. Texas A&M does not accept the IELTS General test or MyBest TOEFL scores.

2026 update: The TOEFL iBT scoring revision effective 21 January 2026 means a score of 4.5 on the new scale does NOT equal 4.5 on the old scale. Confirm with ETS which scale your test falls under before interpreting your score against TAMU’s minimums.

Texas A&M ELP Exemptions for Indian Students

India does not appear on Texas A&M’s country-based English proficiency exemption list. However, two pathways allow Indian applicants to satisfy English requirements without a new test score:

• US degree holders: Completion of a Bachelor’s or Master’s from an accredited US institution qualifies for ELP verification at the graduate level
• MBA TOEFL/IELTS waiver: Full-Time MBA applicants can request a waiver by emailing mbaprograms@mays.tamu.edu with a GMAT Verbal score of at least 28 or a GRE Verbal score of at least 150

Note: Program-specific entry requirements, fees, and intake availability may differ from the institution-wide minimums shown above. Always confirm on the official Texas A&M admissions page for your chosen program before applying.

Texas A&M PG Programs and Entry Requirements

Base graduate tuition at Texas A&M for non-resident students runs USD 813.40 per credit hour (INR 77,556 per credit hour) for the 2025-2026 academic year; a typical 18-credit full-time year costs around USD 14,641 (INR 13.96 Lakhs). Total programme fees vary by college. For a complete course-wise fees breakdown, visit the Fees page. The table below shows entry requirements; fees are not shown per Rule 19 scope separation.

All GPA requirements above apply to a 4.0 scale, equivalent to around 75% in Indian university systems. GRE is optional for most engineering master’s programmes; CS recommends submission when the GPA is borderline. Indian students considering funding should check the funding options for Indian students on the university profile.

Note: Program-specific entry requirements, fees, and intake availability may differ from the institution-wide minimums shown above. Always confirm on the official Texas A&M Graduate School page for your chosen program before applying.

TAMU Undergraduate Programs for Indian Students

Texas A&M has been test-optional since 2024; SAT and ACT scores are neither required nor disadvantaging. Engineering applicants enter the College of Engineering in a general classification and complete the ETAM (Entry to a Major) process in Year 2 to declare their specific discipline. Base UG non-resident tuition runs USD 1,183.15 per credit hour (INR 1.13 Lakhs per credit hour) for the 2025-2026 academic year.

Texas law grants automatic admission to Texas residents graduating in the top 10% of their high school class. International applicants from India are not covered by this rule and go through the full holistic review. There is no published minimum Class XII percentage; the admission committee evaluates overall academic strength, course rigour, and activities.

Texas A&M Mays MBA Admissions

The Mays Business School at Texas A&M offers two full-time MBA formats for international students: the Full-Time MBA (2-year, campus-based) and the Professional MBA (part-time weekend cohort, campus-based). Both are available to international students. Base non-resident tuition is USD 104,799 (INR 99.93 Lakhs) for the Full-Time MBA (49 credit hours over 2 years) and USD 133,918 (INR 127.69 Lakhs) all-inclusive for the Professional MBA. For further details on funding, see the Mays Business School profile.

Texas A&M Full-Time MBA Requirements

• Work experience: Minimum 3 years of full-time post-undergraduate experience required
• GMAT/GRE: Required; auto-waived for applicants with a 3.5+ GPA or a graduate degree plus evidence of statistical knowledge
• English: IELTS 7.0 minimum; TOEFL iBT 5.0 (post-Jan 2026 scale); TOEFL Essentials 10
• TOEFL/IELTS waiver: Available — email mbaprograms@mays.tamu.edu with GMAT Verbal 28+ or GRE Verbal 150+
• Deposit: USD 2,000 (INR 1.91 Lakhs) non-refundable on acceptance; applied to first semester

Texas A&M Full-Time MBA Deadlines (International Applicants)

Texas A&M Professional MBA Deadlines (Fall 2027)

The Professional MBA requires a minimum 2 years of full-time work experience; the cohort average is 8-10 years. GMAT/GRE scores are encouraged but waivers are available. All-inclusive non-resident fees cover textbooks, materials, weekend meals, and an international immersion trip.

Planning note: The Full-Time MBA Spring 2027 international deadline of 15 August 2026 is less than two weeks away. If you are targeting the Spring cohort and hold the required 3 years of experience, submit immediately rather than waiting for a Fall round.

TAMU PhD Admissions

Texas A&M’s doctoral programmes are research-intensive and primarily funded through teaching and research assistantships. Most admitted PhD students receive a graduate assistantship covering tuition and a monthly stipend. The university-wide minimum graduate assistant stipend for 2025-2026 is USD 1,826 per month (INR 1.74 Lakhs per month) at 50% FTE, applicable from September 2025. Individual engineering departments may offer higher amounts.

TAMU PhD Deadlines (Fall 2027)

What Texas A&M PhD Funding Looks Like

All PhD applicants are automatically considered for assistantships and fellowships; no separate funding application is required. Typical support includes:

• Teaching Assistantship (GAT): Minimum USD 1,826/month (INR 1.74 Lakhs); covers tuition waiver
• Research Assistantship (GAR): Minimum USD 1,826/month (INR 1.74 Lakhs); funded by research grants
• Avilés-Johnson Doctoral Fellowship: USD 20,000/year (INR 19.07 Lakhs/year) for years 1-3, plus full tuition and fees (2025-2026 academic year rates)

For a complete list of PhD scholarships, see the full scholarship list on the university profile. Decisions for CS PhD are typically issued by end of February 2027; engineering PhD decisions follow in March 2027.

Insider note: The CS PhD December 15 deadline is earlier than most departmental deadlines because it also determines fellowship eligibility. Missing it and applying in January reduces both admission prospects and funding offers significantly for computer science.

Texas A&M Application Process

Texas A&M routes undergraduate and graduate applicants through different portals. Undergraduate students use the Common Application or ApplyTexas; graduate students use the Texas A&M Graduate Application. Engineering graduate students must also complete a separate EngineeringCAS application. The step-by-step process below applies to the Fall 2027 cycle.

1. UG applicants: Create a profile on the Common Application (commonapp.org) or ApplyTexas (applytexas.org); Texas A&M College Station is a listed member institution. Applications for Fall 2027 have been accepted from 1 August 2026.
2. Graduate applicants: Begin at the Texas A&M Graduate Admissions portal (grad.tamu.edu); engineering programmes also require a simultaneous EngineeringCAS application. Start both portals together to avoid missing the earlier of the two deadlines.
3. Pay the application fee: The application fee of USD 90 (INR 8,582) is due at submission on the Texas A&M admissions portal. Engineering graduate applicants also pay USD 58 (INR 5,531) to EngineeringCAS, for a total application fee of USD 148 (INR 14,112).
4. Upload supporting documents: Transcripts, English proficiency scores, statement of purpose, and letters of recommendation are submitted through the portal. No physical mailing is required unless specifically requested.
5. Monitor the application status: Track review progress through the Texas A&M Applicant Information System (AIS). Departments may request additional materials or a virtual interview during review.

• UG tip: Submit the essay through the application portal or upload directly to AIS after submission
• Grad tip: Check whether your programme lists a fellowship priority date earlier than the standard international deadline
• MBA tip: Submit the Full-Time MBA pre-application form before starting the full Mays portal application

TAMU Admission Decisions and Offer Timeline

Texas A&M’s decision timeline varies by level and programme. Applicants receive notifications through the Applicant Information System (AIS) and by email. Conditional offers may specify outstanding documentation requirements.

• UG decisions: Typically released on a rolling basis from January 2027 for the Fall 2027 cycle
• MS Computer Science decisions: Master’s decisions usually issued by mid-March 2027; PhD decisions by end of February 2027
• Engineering MS/PhD decisions: Typically March to April 2027 for Fall intake
• MBA Full-Time Round 1 (Oct 30 deadline): Decisions expected within 6 to 8 weeks of the round closing
• Deferral policy: Texas A&M does not have a published general deferral programme; admitted students who cannot enrol must reapply in a future cycle
• Acceptance deadline: Admitted students must confirm enrolment and pay any required deposit by the date stated in the offer letter, typically 3 to 4 weeks after the offer is issued

Texas A&M Documents Required for Admission

The following documents are required at the point of application or shortly after. Transcripts and degree certificates must be official (sealed or electronically verified) and in English or accompanied by a certified translation.

• Valid passport (biographical data page)
• Official academic transcripts from all institutions attended (Class XII mark sheets for UG; Bachelor’s mark sheets and degree certificate for graduate)
• Official English proficiency score report (IELTS, TOEFL, TOEFL Essentials, or GRE/GMAT Verbal for graduate ELP)
• Statement of Purpose (SOP) or Personal Statement
• Three letters of recommendation for graduate programmes (two for distance engineering programmes)
• CV or Resume (graduate and MBA applicants)
• Financial support documents (bank statements, scholarship letters, or sponsor affidavit) for visa and enrolment purposes
• WES evaluation of transcripts (required for MBA Full-Time applicants with non-US degrees; must be electronically available by the application deadline)
• GRE or GMAT score report (if submitting; optional for most MS; required or encouraged for MBA)
• Research statement and writing sample (PhD applicants; department-specific requirements vary)

TAMU Acceptance Rate

Texas A&M University’s overall institutional acceptance rate is 57%, making it moderately selective as a large public research university. This figure encompasses all undergraduate programmes and reflects the university’s broad access model — admitting qualified applicants who meet its stated academic standards. Programme-level selectivity varies substantially.

What the 57% Rate Means for Indian Applicants

The 57% rate is an institution-wide average and is lower for competitive graduate programmes. Indian applicants to MS Computer Science and MS Data Science typically face stronger competition, as these programmes attract large international applicant pools. Petroleum Engineering and Civil Engineering graduate programmes may have relatively higher admit rates given their specialised nature and smaller applicant bases.

Insider note: Texas A&M’s Petroleum Engineering programme is ranked 2nd globally by QS in its subject, drawing a highly technical and internationally competitive applicant pool. A strong GPA and relevant research or industry experience is essential to stand out, even with the university’s broadly open UG admissions model.

What Strengthens a TAMU Application

• For MS programmes: GPA above 3.5 (above 80% in Indian systems); relevant research or internship experience
• For PhD: Published research or strong faculty contact prior to applying
• For UG: Advanced coursework (IB, AP, or equivalent); demonstrable leadership or research activities
• For MBA: Industry impact demonstrated in 500-word essays; quantitative rigour in professional background

For context on where Texas A&M sits across global and US rankings, see the Texas A&M ranking profile.

USA Student Visa for Texas A&M Applicants

International students admitted to Texas A&M University attend on an F-1 student visa, the standard non-immigrant visa for full-time academic programmes in the United States. Once you accept your offer and satisfy enrolment deposit requirements, the university’s International Student and Scholar Services (ISSS) office, at global.tamu.edu/isss, issues a Form I-20. The I-20 is the official SEVIS document required to apply for the F-1 visa at a US Embassy or Consulate in India. You pay the SEVIS fee (USD 350, INR 33,372) before your visa interview and carry the I-20 to the interview. Financial proof must show sufficient funds to cover at least the first year of study, including tuition, fees, and living expenses. After arrival, register with ISSS within the first week of classes and maintain full-time enrolment (minimum 12 credit hours per semester for UG, 9 for graduate) to keep your F-1 status valid.

Planning note: US Embassy interview wait times in Indian cities vary from a few days to several weeks depending on the season. Book your appointment at least 8 to 10 weeks before the semester start date to allow time for visa processing and travel.

Tips and Application Checklist for Texas A&M Admissions

The following tips and steps are drawn from Indian-applicant patterns at Texas A&M and reflect the practical sequencing that avoids last-minute gaps.

• Identify ETAM programme early: Engineering UG applicants must pass ETAM criteria (GPA, required courses) in Year 1-2; research your target major’s ETAM cutoffs before applying
• Book IELTS by October 2026: For Fall 2027 graduate applications, score reports must reach departments by the January-February deadlines; allow 13 to 28 days for IELTS result delivery
• Start WES evaluation 12 weeks before deadline: MBA Full-Time applicants with Indian degrees must submit a WES credential evaluation; WES processing takes 7 to 10 weeks
• Contact PhD supervisors before applying: Emailing a potential faculty supervisor with your research interests increases your admission and funding prospects; do this by October 2026 for December deadlines
• Apply for MBA Spring 2027 by 15 August 2026: The international final deadline is 11 days away; complete the pre-application form first on the Mays portal
• Request transcripts 8 weeks before deadline: Indian universities can take 3 to 6 weeks to dispatch official transcripts; order well ahead of the December and January deadlines
• Note the two-portal requirement for engineering MS/PhD: Both the Texas A&M application and the EngineeringCAS must be submitted separately; start both on the same day
• F-1 visa appointment: Book US Embassy appointment within one week of receiving the I-20, targeting at least 8 weeks before the August 2027 semester start

Texas A&M University offers a strong peer network for Indian students, competitive engineering rankings, and a broad graduate admissions window spanning December 2026 through February 2027. The Fall 2027 UG cycle is open now with a December 1 deadline; MBA applicants targeting Spring 2027 must move by August 15.