CUET PG PYQs for Casting, Forming and Joining Processes with Solutions: Practice CUET PG Previous Year Questions

Content Writer | Journalism Graduate | Updated 3+ months ago

Casting, Forming and Joining Processes is an important topic in the Mechanical Engineering section in CUET PG exam. Practising this topic will increase your score overall and make your conceptual grip on CUET PG exam stronger.

This article gives you a full set of CUET PG PYQs for Casting, Forming and Joining Processes with explanations for effective preparation. Practice of CUET PG Mechanical Engineering PYQs including Casting, Forming and Joining Processes questions regularly will improve accuracy, speed, and confidence in the CUET PG 2026 exam.

CUET PG PYQs for Casting, Forming and Joining Processes with Solutions

1.
Under ideal conditions in drawing operation maximum possible reduction of area in one pass is:
- 28%
- 47%
- 63%
- 71%
View Solution
2.
The DC power source for arc welding has the characteristics \( 3V + I = 240 \), where 'V' is the voltage in volts and 'I' is the current in amperes. For maximum power at the electrode, voltage should be set at:
- 40 V
- 140 V
- 220 V
- 240 V
View Solution
3.
Which of the following is a solid state joining process?
- Gas tungsten arc welding
- Friction welding
- Submerged arc welding
- Resistance spot welding
View Solution
4.
Centre-line feeding resistance CFR indicates the difficulty of feeding a given alloy in a mould Normally feeding is considered to be difficult if
- CFR > 70%
- CFR = 68%
- CFR = 48%
- 48% < CFR < 68%
View Solution
5.
Assertion (A): In Electrical Discharge Machining (EDM), fragile parts can be machined without distortion because no mechanical work is involved.
Reason (R): The surface finish of the finished components made using EDM is poor because of presence of small craters.
- Both (A) and (R) are correct and (R) is the correct explanation of (A)
- Both (A) and (R) are correct but (R) is not the correct explanation of (A)
- (A) is correct but (R) is not correct
- (A) is not correct but (R) is correct
View Solution

View more CUET PG Questions

SHARE ON FACEBOOK SHARE ON TWITTER

Comments

No Comments To Show

SUBSCRIBE TO OUR NEWS LETTER

COLLEGE NOTIFICATIONS

EXAM NOTIFICATIONS

NEWS UPDATES

Download the Collegedunia app on

CUET PG PYQs for Casting, Forming and Joining Processes with Solutions

1.Under ideal conditions in drawing operation maximum possible reduction of area in one pass is:

2.The DC power source for arc welding has the characteristics \( 3V + I = 240 \), where 'V' is the voltage in volts and 'I' is the current in amperes. For maximum power at the electrode, voltage should be set at:

3.Which of the following is a solid state joining process?

4.Centre-line feeding resistance CFR indicates the difficulty of feeding a given alloy in a mould Normally feeding is considered to be difficult if

5.Assertion (A): In Electrical Discharge Machining (EDM), fragile parts can be machined without distortion because no mechanical work is involved. Reason (R): The surface finish of the finished components made using EDM is poor because of presence of small craters.

Comments

SUBSCRIBE TO OUR NEWS LETTER

1.
Under ideal conditions in drawing operation maximum possible reduction of area in one pass is:

2.
The DC power source for arc welding has the characteristics \( 3V + I = 240 \), where 'V' is the voltage in volts and 'I' is the current in amperes. For maximum power at the electrode, voltage should be set at:

3.
Which of the following is a solid state joining process?

4.
Centre-line feeding resistance CFR indicates the difficulty of feeding a given alloy in a mould Normally feeding is considered to be difficult if

5.
Assertion (A): In Electrical Discharge Machining (EDM), fragile parts can be machined without distortion because no mechanical work is involved.
Reason (R): The surface finish of the finished components made using EDM is poor because of presence of small craters.