Students aiming for Fitter trade at Government ITIs in Bihar through ITICAT 2026 need an estimated score of 245 to 260 marks out of 300 for General category seats at top institutes such as Govt. ITI Patna, based on 2024 and 2025 seat allotment trends.
The Bihar Combined Entrance Competitive Examination Board (BCECEB) conducts the ITI Common Admission Test (ITICAT) each year for admission to engineering and non-engineering trades at government and private ITIs across Bihar. The Fitter trade is one of the most competitive engineering trades due to strong employment prospects in manufacturing and industrial sectors. Cutoff marks for each institute and category are released by BCECEB after every round of seat allotment.
- ITICAT 2026 is scored out of 300 marks (150 MCQs, 2 marks each); no negative marking.
- Government ITI Patna has the highest expected cutoff for Fitter trade at approximately 245 to 260 marks for General category.
- Category-wise cutoff: General students need approximately 184 to 260 marks; SC students need approximately 126 to 195 marks.
- Your 10th board marks are a qualification criterion only (minimum 35% pass); ITICAT exam score determines the merit rank.
- ITICAT 2026 seat allotment results and cutoffs are expected by June 30, 2026 on bceceboard.bihar.gov.in.
| Direct Link to ITICAT 2026 Official Website (OUT) |
ITICAT 2026 Fitter Trade Cutoff: Key Facts
ITICAT is a written entrance examination with 150 multiple-choice questions worth 2 marks each, for a total of 300 marks. There is no negative marking. The paper covers Mathematics, Science, and General Knowledge at 10th standard level. Your final rank on the ITICAT 2026 merit list depends entirely on this exam score.
BCECEB prepares a state-wide rank list from ITICAT scores and announces a cutoff for each ITI and each trade after every round of seat allotment. For Fitter trade, Government ITIs in Patna, Gaya, and Muzaffarpur attract the highest applicant volume and therefore carry the highest cutoffs. Students who score above the closing cutoff for their category at their preferred ITI are allotted a seat in that round.
Expected Cutoff at Government ITIs for Fitter Trade in ITICAT 2026
The table below lists expected ITICAT 2026 Fitter trade cutoff marks at major Government ITIs in Bihar for General, BC, EBC, and SC categories. All figures are based on 2024 and 2025 seat allotment closing rank data converted to approximate marks and should be treated as expected estimates until BCECEB releases the official result.
| Government ITI | District | General (Expected) | BC (Expected) | EBC (Expected) | SC (Expected) |
|---|---|---|---|---|---|
| Govt. ITI Patna | Patna | 245–260 | 220–238 | 198–215 | 178–195 |
| Govt. ITI Gaya | Gaya | 235–250 | 210–228 | 188–205 | 168–185 |
| Govt. ITI Muzaffarpur | Muzaffarpur | 228–244 | 204–222 | 182–200 | 162–180 |
| Govt. ITI Bhagalpur | Bhagalpur | 220–238 | 196–215 | 175–194 | 156–174 |
| Govt. ITI Darbhanga | Darbhanga | 214–232 | 190–208 | 170–188 | 150–168 |
| Govt. ITI Purnia | Purnia | 206–224 | 183–200 | 163–180 | 144–161 |
| Govt. ITI Arrah | Bhojpur | 200–218 | 178–195 | 158–175 | 140–157 |
| Govt. ITI Chapra | Saran | 194–212 | 172–190 | 152–170 | 135–152 |
| Govt. ITI Nalanda | Nalanda | 190–207 | 168–185 | 148–165 | 130–148 |
| Govt. ITI Samastipur | Samastipur | 184–202 | 163–180 | 143–160 | 126–143 |
Official ITICAT 2026 Fitter trade cutoff marks will be published on bceceboard.bihar.gov.in after the seat allotment result is declared. The ranges above are expected values based on previous year closing data.
Category-wise Minimum Marks for Fitter Trade in ITICAT 2026
BCECEB allocates seats as per Bihar government reservation norms. The table below shows the expected minimum marks out of 300 required across all categories to secure a Fitter trade seat at any Government ITI in Bihar.
| Category | Expected Minimum Marks (out of 300) | Approximate Percentage |
|---|---|---|
| General (UR) | 184–260 | 61%–87% |
| EWS (Economically Weaker Section) | 176–250 | 59%–83% |
| BC (Backward Class) | 163–238 | 54%–79% |
| EBC (Extremely Backward Class) | 143–215 | 48%–72% |
| SC (Scheduled Caste) | 126–195 | 42%–65% |
| ST (Scheduled Tribe) | 115–175 | 38%–58% |
The lower figure in each range reflects Government ITIs in smaller districts; the higher figure reflects top institutes such as Govt. ITI Patna. Students must ensure their correct category is selected during ITICAT 2026 registration to be considered under the reserved category cutoff.
Previous Year ITICAT Fitter Trade Cutoff Trends
Reviewing previous year closing marks helps students set a realistic score target. The data below is indicative and derived from ITICAT 2023 and 2024 seat allotment closing rank information.
| Government ITI | General Closing Marks 2024 (Approx.) | General Closing Marks 2023 (Approx.) | SC Closing Marks 2024 (Approx.) |
|---|---|---|---|
| Govt. ITI Patna | 255 | 248 | 190 |
| Govt. ITI Gaya | 244 | 237 | 180 |
| Govt. ITI Muzaffarpur | 238 | 231 | 175 |
| Govt. ITI Bhagalpur | 231 | 224 | 169 |
| Govt. ITI Darbhanga | 225 | 218 | 163 |
The ITICAT Fitter trade cutoff at top Government ITIs has risen by 5 to 8 marks per year on average, reflecting steadily growing applicant numbers and stronger exam preparation. Students targeting Govt. ITI Patna for the 2026 cycle should aim for a score above 245.
Factors Affecting ITICAT 2026 Fitter Trade Cutoff
The closing cutoff for Fitter trade at each Government ITI in Bihar is influenced by several factors:
- Total applicants for Fitter trade: Higher applicant volume for the same number of seats directly raises the cutoff.
- Sanctioned seat intake: Institutes with fewer Fitter trade seats relative to demand see a sharper rise in cutoff.
- Exam difficulty level: An easier ITICAT 2026 paper results in more students scoring high marks, pushing the overall cutoff upward.
- Location preference: Government ITIs in Patna and other major district headquarters receive more applicants than those in smaller towns, resulting in higher cutoffs at those institutes.
- Number of counselling rounds: The cutoff drops progressively in later rounds as unfilled seats become available to students with lower scores.
- Category-wise seat matrix: The proportion of reserved seats for BC, EBC, SC, and ST determines how many students from each group compete for a smaller pool, affecting category-specific cutoffs.
ITICAT 2026 Fitter Trade Cutoff FAQs
Ques. What is the minimum score needed in ITICAT 2026 for Fitter trade at Govt. ITI Patna?
Ans. Based on 2024 and 2025 trends, General category students need approximately 245 to 260 marks out of 300 to secure a Fitter trade seat at Government ITI Patna. SC category students need approximately 178 to 195 marks. These are expected figures; the official cutoff will be published on bceceboard.bihar.gov.in after BCECEB releases the seat allotment result.
Ques. Is ITICAT merit based on 10th board marks or the entrance exam score?
Ans. ITICAT merit is based entirely on the entrance exam score. The exam has 150 MCQ questions worth 2 marks each, totaling 300 marks. Your 10th board marks are only a qualification criterion (minimum 35% pass in relevant subjects) and do not count toward the merit rank used for seat allotment.
Ques. Which Government ITI in Bihar has the lowest cutoff for Fitter trade in ITICAT?
Ans. Government ITIs in smaller districts such as Samastipur, Chapra, and Nalanda typically have lower Fitter trade cutoffs. Based on previous year trends, General category students may secure a seat at these institutes with approximately 184 to 210 marks out of 300 in ITICAT 2026.
Ques. Does the ITICAT Fitter trade cutoff change across counselling rounds?
Ans. Yes. The cutoff is highest in Round 1 and usually drops in Round 2 and Round 3 as vacant seats become available. If you miss the Round 1 cutoff at your preferred Government ITI, you may still secure a Fitter trade seat in a later round, especially at institutes outside major cities.
Ques. What is a good score in ITICAT 2026 to get Fitter trade at a Government ITI in Bihar?
Ans. A score of 220 or above out of 300 gives you a strong chance at mid-tier Government ITIs in Bihar for Fitter trade. Students aiming for Government ITI Patna or Gaya should target 245 or higher. SC and EBC category students with 165 or more marks have a reasonable chance at most district-level government ITIs, based on previous year data.
Ques. Where can I check the official ITICAT 2026 Fitter trade cutoff for Government ITIs?
Ans. The official ITICAT 2026 Fitter trade cutoff and seat allotment result will be published on the BCECE Board portal at bceceboard.bihar.gov.in under the ITICAT section. Students should check the portal after each counselling round for their specific category and institute cutoff.
Comments