CMRIT Bangalore Ph.D Mechanical Engineering: Fees 2026, Course Duration, Dates, Eligibility

Marathahalli, BangaloreEstd 2000 VTU, Belgaum NAAC Grade A++
Total fees
INR 1.80 Lakhs
full course, no hostel
Average pay
INR 6 LPA
NIRF median used for ROI
Cutoff
420
VTU ETR, General
Placement rate
75%
NIRF UG placement data
In This Page▾

About CMRIT Ph.D. Mechanical Engineering

CMRIT Ph.D. Mechanical Engineering is a part-time research course at CMR Institute of Technology in Bengaluru. The minimum study time is 3 years. The department is AICTE approved, linked to VTU, and has research centres in Metallurgical Engineering and Additive Manufacturing. The full course fee without hostel is INR 1.80 Lakhs. Admission is through VTU ETR, the research entrance test, and a pre-registration interview. The page uses 8 research slots for the checker. The pay figure used for ROI is INR 6 LPA, based on the latest NIRF median pay printed on this page.

CMRIT Ph.D. Mechanical Engineering Fees

The total fees with hostel and visits is INR 2.70 Lakhs. The fees without hostel is INR 1.80 Lakhs, and the tuition fee is INR 1.50 Lakhs. You pay the tuition fee once each year across 3 years. The college may charge research and admission fees in year 1. The refundable deposit is not added to the total.

Fee headAmountHow it is charged
Tuition feeINR 1.50 LakhsPer year × 3, INR 50,000 a year
Admission feeINR 15,000One time, in year 1
Research centre feeINR 15,000One time, in year 1
Caution depositINR 10,000One time, returned when you leave
Campus visits and thesis costsINR 90,000Per year × 3, INR 30,000 a year
Total, no hostelINR 1.80 LakhsTuition, admission and research fees
Total with hostelINR 2.70 LakhsIncludes campus visits and thesis costs

CMRIT Ph.D. Mechanical Engineering Admission Dates

The VTU ETR notice was released on 31 Aug 2026, and the extension circular came on 22 Sep 2026. The next key step is the last date to apply in Oct 2026, followed by the test in Nov 2026. You should keep the topic note ready before the interview in Jan 2027.

EventDateStatus
VTU ETR notice31 Aug 2026Over
Extension circular22 Sep 2026Over
Registration, last date to applyOct 2026Tentative
VTU ETR examNov 2026Tentative
Result and research rankDec 2026Tentative
Pre-registration interviewJan 2027Tentative
Supervisor allotmentFeb 2027Tentative
Fee paymentMar 2027Tentative
Document checkApr 2027Tentative
Classes startJun 2027Tentative

CMRIT Ph.D. Mechanical Engineering Eligibility

The main rule is 60% marks or 6.75 CGPA in a Master's degree. A 4-year Bachelor's degree needs 70% marks or 7.75 CGPA with research papers or patents. You also need one year of work after UG for part-time admission.

RequirementWhat you need
PG degreeMaster's degree in Engineering or Technology
Marks60% marks or 6.75 CGPA
UG route70% marks or 7.75 CGPA with papers or patents
Part-time workOne year of work after UG
EntranceVTU ETR and pre-registration interview

CMRIT Ph.D. Mechanical Engineering Admission Process

The entrance test is 100 marks, and the table has five steps from apply to join. You register, write VTU ETR, meet the panel and pay the fee after selection. The research centre and VTU check your papers. If you miss the fee date, you lose the seat.

StepWhat you do
ApplyFill the VTU ETR form
TestWrite the 100-mark entrance test
InterviewPresent your research idea to the panel
AllotmentGet the research centre and supervisor
JoinPay the fee and finish document check

CMRIT Ph.D. Mechanical Engineering Cutoff

The General part-time seat is shown at rank 420 in VTU ETR 2026, and the OBC range closes near rank 520. These are research ranks used for the checker. A lower rank is safer. The interview can still change the final list.

CategoryClosing rank or scoreRound and year
General, part-time420VTU ETR 2026
OBC-NCL, part-time520 rankVTU ETR 2026
SC/ST, part-time650 rankVTU ETR 2026
EWS, part-time470 rankVTU ETR 2026

CMRIT Ph.D. Mechanical Engineering Placements

The pay figure used here is INR 6 LPA, and the placement rate is 75%. NIRF data shows 686 of 918 UG students placed, so the page uses that median pay only for ROI. Research students should check guide fit and industry links.

MetricValue
Average pay used for ROIINR 6 LPA
Placement rate used75%
Students placed in NIRF data686 of 918
Mechanical research areasMaterials, energy and manufacturing
City linkBengaluru Whitefield industry belt

CMRIT Ph.D. Mechanical Engineering Scholarships

The biggest printed waiver is INR 60,000, and the calculator can add more support when schemes match. SC, ST, OBC and EWS students should keep income papers ready. You should apply early because portals may close before the interview list is final.

ScholarshipWho can get itAmount or waiver
Karnataka post-matric scholarshipSC or ST students with income proofINR 60,000
Central Sector SchemeGeneral or EWS students in the income limitINR 30,000
EWS fee supportEWS students with certificateINR 45,000
OBC post-matric scholarshipOBC-NCL students with income proofINR 30,000

CMRIT Ph.D. Mechanical Engineering Ranking

CMRIT is in the NIRF 151 to 200 rank group, and the Mechanical department has NBA accreditation. The college is AICTE approved and works under VTU. Use the rank as a quality sign, then check your supervisor and research area.

Ranking bodyYearRank or grade
NIRF Engineering2026151 to 200 rank group
NBA2026Mechanical department accredited
AICTE and VTU2026Approved and affiliated

CMRIT Ph.D. Mechanical Engineering Course Structure

Year 1 has coursework and research method papers. Year 2 has the proposal, reviews and lab work. Year 3 is for thesis writing and final submission. You should pick a topic that matches the guide's work before you join.

YearWhat you study
Year 1Coursework, research method and literature review
Year 2Proposal, reviews and lab work
Year 3Thesis writing, paper work and viva

CMRIT Ph.D. Mechanical Engineering Hostel and Campus

The extra cost used is INR 90,000, and the campus is in Whitefield, Bengaluru. The course is part-time, so hostel is not the main cost for working students. You should plan travel before choosing a supervisor.

ItemDetail
Campus areaWhitefield, Bengaluru
Research labsMetallurgical Engineering and Additive Manufacturing centres
Hostel needUsually not needed for part-time students
Extra cost usedINR 90,000 for visits and thesis work

Should you pick Ph.D. Mechanical Engineering at CMRIT?

This course suits working engineers who want a research degree without leaving their job.

Pick it if:
Your job is in Bengaluru: the part-time mode lets you meet the supervisor while you keep working.
You want materials research: the department has Metallurgical Engineering and Additive Manufacturing centres for this work.
You want a low study cost: INR 1.80 Lakhs is much less than many private Ph.D. routes.
You can prepare for VTU ETR: the interview comes after the test, so keep your topic note ready.
Skip it if:
You need a campus job after admission: Ph.D. students here use research and work links, not placement rounds.
You want a pure design lab: the department leans toward materials, energy and manufacturing research.
Your pay goal is quick: the ROI tile uses INR 6 LPA, but Ph.D. value takes time.
You cannot show work papers: part-time admission needs one year of work after UG.
Counsellor's advice
Take it if your job lets you meet the supervisor often. If not, wait for a full-time seat.
Ph.D. Mechanical Engineering Eligibility▾
PG degree: You need a Master's degree in Engineering or Technology with 60% marks or 6.75 CGPA.
UG route: A 4-year Bachelor's degree needs 70% marks or 7.75 CGPA and research papers or patents.
Part-time rule: You need one year of work after UG in a recognised institution or research group.
Entrance test: VTU ETR is 100 marks and leads to a pre-registration interview.
Topic fit: Mechanical Engineering accepts materials, energy, kinematics and manufacturing research.
Ph.D. Mechanical Engineering Admission Process▾
Apply online: Fill the VTU ETR form and upload marks cards, work proof and research area.
Write VTU ETR: The entrance test checks research aptitude and subject knowledge for 100 marks.
Attend interview: CMRIT checks your topic fit, guide fit and part-time work papers.
Get allotment: VTU and the research centre confirm the guide, centre and research area.
Pay and report: Pay the first fee by the date given and finish document check at the centre.

Ph.D. Mechanical Engineering Admission Dates 2027

▾

These are the official 2026 notices. Tap 2028 Session for expected dates of the next batch.

The 2028 calendar is not out yet. These dates are estimates based on 2027.
31 Aug 2026Over
VTU ETR notice
The admission test notice was released for research seats.
22 Sep 2026Over
Extension circular
VTU gave students more time to finish the form.
Oct 2026Tentative
Registration, last date to apply
The last date to apply is expected in Oct 2026.
Nov 2026Tentative
VTU ETR exam
You write the research entrance test in this window.
Dec 2026Tentative
Result and research rank
VTU shares the score and rank used for interview calls.
Jan 2027Tentative
Pre-registration interview
CMRIT checks your research idea and guide fit.
Feb 2027Tentative
Supervisor allotment
The research centre and supervisor are allotted after the interview.
Mar 2027Tentative
First fee payment
You lose the seat if the first fee is not paid by this step.
Apr 2027Tentative
Reporting and document check
Bring marks cards, work proof and admission papers.
Jun 2027Tentative
Classes start
Coursework and research work start for the 2027 intake.
Aug 2027Tentative
VTU ETR notice
The 2028 intake notice is expected around this month.
Sep 2027Tentative
Registration, last date to apply
The last date to apply is expected after the notice.
Nov 2027Tentative
VTU ETR exam
You write the research entrance test in this window.
Dec 2027Tentative
Result and research rank
VTU shares the rank used for interview calls.
Jan 2028Tentative
Pre-registration interview
CMRIT checks your topic and guide fit.
Feb 2028Tentative
Supervisor allotment
The research centre and supervisor are allotted after the interview.
Mar 2028Tentative
First fee payment
You pay the first part before the seat is confirmed.
Apr 2028Tentative
Reporting and document check
Bring marks cards, work proof and admission papers.
Jun 2028Tentative
Classes start
Coursework and research work start for the 2028 intake.

Source: VTU Ph.D. notices and CMRIT Ph.D. page. Confirm on the official site before you act.

CMRIT Ph.D. Mechanical Engineering Fees 2027

▾

This is the full 3-year cost, not one year. Turn on the toggle to add campus visits and thesis cost.

Tuition fee
Per year × 3, INR 50,000 a year
INR 1.50 Lakhs
Admission fee
One time, in year 1
INR 15,000
Research centre fee
One time, in year 1
INR 15,000
Caution deposit Refundable
One time, returned when you leave
INR 10,000
Add campus visits + thesis costs
Campus visits and thesis costs
Per year × 3, INR 30,000 a year
INR 90,000
Total course fee
INR 1.80 Lakhs
3 years · tuition + admission fee, visits not added
Total course fee
INR 2.70 Lakhs
3 years · tuition + admission fee + campus visits
Education loan EMI
INR 3,035
7 yr · 10.5% per year
ROI
333%
average first-year pay INR 6 LPA vs the full fee
Education loan EMI
INR 4,552
7 yr · 10.5% per year
ROI
222%
average first-year pay INR 6 LPA vs the full fee

Source: CMRIT Ph.D. page and VTU research notices. Confirm on the official site before you act.

Will your VTU ETR rank get you Ph.D. at CMRIT?

Pick your category and mode. The cutoff range is based on the research rank used for interview calls.

Category
Mode
General, Part-time mode
300 and above: yes, you are safe for the interview list.
301 to 420: almost there. Keep the course high on your list and prepare for the interview.
Below 420: not safe this year. Try again if the topic is fixed.
General, Full-time mode
250 and above: yes, you are safe for the interview list.
251 to 360: almost there. Keep the course high on your list and prepare for the interview.
Below 360: not safe this year. Try again if the topic is fixed.
OBC-NCL, Part-time mode
380 and above: yes, you are safe for the interview list.
381 to 520: almost there. Keep the course high on your list and prepare for the interview.
Below 520: not safe this year. Try again if the topic is fixed.
OBC-NCL, Full-time mode
330 and above: yes, you are safe for the interview list.
331 to 450: almost there. Keep the course high on your list and prepare for the interview.
Below 450: not safe this year. Try again if the topic is fixed.
SC, Part-time mode
480 and above: yes, you are safe for the interview list.
481 to 650: almost there. Keep the course high on your list and prepare for the interview.
Below 650: not safe this year. Try again if the topic is fixed.
SC, Full-time mode
430 and above: yes, you are safe for the interview list.
431 to 600: almost there. Keep the course high on your list and prepare for the interview.
Below 600: not safe this year. Try again if the topic is fixed.
ST, Part-time mode
500 and above: yes, you are safe for the interview list.
501 to 700: almost there. Keep the course high on your list and prepare for the interview.
Below 700: not safe this year. Try again if the topic is fixed.
ST, Full-time mode
450 and above: yes, you are safe for the interview list.
451 to 640: almost there. Keep the course high on your list and prepare for the interview.
Below 640: not safe this year. Try again if the topic is fixed.
EWS, Part-time mode
340 and above: yes, you are safe for the interview list.
341 to 470: almost there. Keep the course high on your list and prepare for the interview.
Below 470: not safe this year. Try again if the topic is fixed.
EWS, Full-time mode
300 and above: yes, you are safe for the interview list.
301 to 410: almost there. Keep the course high on your list and prepare for the interview.
Below 410: not safe this year. Try again if the topic is fixed.
EDITOR'S NOTE

The interview can change the final list. Use the rank as a guide, then check supervisor fit before you pay.

CMRIT Ph.D. Mechanical Engineering Scholarship Calculator

Answer these questions. The result is an estimate to confirm with the college.

Category
Family income
Scholarships you missedYou do not qualify on your answers. Tap to see why.▾

Each chip below says which answer blocked the scheme.

Karnataka post-matric scholarship
INR 60,000
Government of Karnataka
For SC or ST students with income proof and fee receipts.
Who qualifies: SC/ST, income up to INR 2.5 LakhsApply by Dec 2026
Not eligible on your answers
Central Sector Scheme
INR 30,000
National Scholarship Portal
For low-income students who renew the claim each year.
Who qualifies: General or EWS, income up to INR 6 LakhsApply by Nov 2026
Not eligible on your answers
EWS fee support
INR 45,000
State and central fee support
For EWS students with a valid certificate and income proof.
Who qualifies: EWS, income up to INR 6 LakhsApply by Nov 2026
Not eligible on your answers
OBC post-matric scholarship
INR 30,000
Government of Karnataka
For OBC-NCL students with income proof and admission papers.
Who qualifies: OBC-NCL, income up to INR 2.5 LakhsApply by Dec 2026
Not eligible on your answers
No scheme matches these answers. Ask the college about paying in parts and about education loans.
Estimated total waiver
INR 30,000
Your net course fee: INR 1.50 Lakhs
Estimated total waiver
INR 0
Your net course fee: INR 1.80 Lakhs
Estimated total waiver
INR 60,000
Your net course fee: INR 1.20 Lakhs
Estimated total waiver
INR 90,000
Your net course fee: INR 90,000
Estimated total waiver
INR 75,000
Your net course fee: INR 1.05 Lakhs

CMRIT Ph.D. Mechanical Engineering vs similar colleges

Tap a college to see it next to CMRIT. The cream box marks the better number in each row: lower fees, higher pay, an easier cutoff.

Compare with
This page
CMR Institute of Technology
Bengaluru
Compared with
RNS Institute of Technology
Bengaluru
Compared with
BMS Institute of Technology and Management
Bengaluru
Compared with
New Horizon College of Engineering
Bengaluru
Compared with
Dayananda Sagar College of Engineering
Bengaluru
Compared with
Nitte Meenakshi Institute of Technology
Bengaluru
Total fees3 years, no hostel
INR 1.80 Lakhs
tuition + admission
INR 1.65 Lakhs
INR 15,000 less
INR 2.10 Lakhs
INR 30,000 more
INR 1.80 Lakhs
Same fee
INR 1.95 Lakhs
INR 15,000 more
INR 1.70 Lakhs
INR 10,000 less
Average paylatest NIRF pay
INR 6 LPA
median used for ROI
INR 6.5 LPA
INR 0.5 LPA more
INR 5.8 LPA
INR 0.2 LPA less
INR 5.4 LPA
INR 0.6 LPA less
INR 5.9 LPA
INR 0.1 LPA less
INR 5.6 LPA
INR 0.4 LPA less
Placement rateNIRF placement data
75%
UG data used
70%
5 points lower
80%
5 points higher
68%
7 points lower
73%
2 points lower
71%
4 points lower
Closing rankVTU ETR, General
420
part-time mode
360
60 places tougher
510
90 places easier
580
160 places easier
455
35 places easier
530
110 places easier
Seatsactive research slots
8
Mechanical research
6
2 fewer
10
2 more
5
3 fewer
12
4 more
7
1 fewer
ROIpay against fee
333%
fee without visits
394%
61 points higher
276%
57 points lower
300%
33 points lower
303%
30 points lower
329%
4 points lower
In short
If your topic needs materials labs, pick CMRIT. If you need the lower fee, check RNSIT after the guide list is out.
In short
If you want more research slots, BMSIT is easier to place high. If fee matters more, keep CMRIT above it.
In short
If your VTU ETR rank is weak, New Horizon looks easier. If pay and placement matter, CMRIT has the stronger printed numbers.
In short
If you need more supervisors, Dayananda Sagar gives more slots. If you want lower fees, CMRIT is the safer cost choice.
In short
If the fee is your first filter, NMIT costs less. If pay and placement guide you, CMRIT is ahead on this page.

Fees and pay can change. Check each college site before you decide.

FAQs on CMRIT Ph.D. Mechanical Engineering

Straight answers to what students ask before they decide.

Is Ph.D. Mechanical Engineering at CMRIT worth the fee?▾
Yes, if your research topic fits the guide list. The full fee without visits is INR 1.80 Lakhs, and the ROI block uses INR 6 LPA only as a pay marker. Check the supervisor and lab area before you pay, because a Ph.D. depends more on guide fit than on fees.
Should I take this part-time Ph.D. if I am working?▾
Yes, if your job gives time for meetings, coursework and reviews. CMRIT lists part-time research for in-service students, and the course needs one year of work after UG. Ask your employer for study leave support before you apply, because missed reviews can slow the degree.
What job value will I get after this Ph.D.?▾
The value is strongest for teaching, research and senior technical roles. The page uses INR 6 LPA as the pay figure for ROI, but a Ph.D. is not a quick placement course. Pick it if the degree helps your present work or your next research role.
Who should skip Ph.D. Mechanical Engineering at CMRIT?▾
Skip it if you want a campus placement route right after admission. Ph.D. students mainly build value through research work, guide support and industry links. If your goal is a fast salary jump, compare the 3-year fee and time with your job plan first.
Is this course good for materials research?▾
Yes, this is one of the stronger fits on the page. The Mechanical department has Metallurgical Engineering and Additive Manufacturing centres, so materials and manufacturing topics fit the campus better than many pure design topics. Talk to the guide before you lock the topic.
Should I wait for a full-time Ph.D. instead?▾
Wait only if you can leave work and need daily lab time. The part-time route is better when your job is in Bengaluru and your topic can move through planned reviews. If your research needs lab access every week, ask for a full-time seat or a different topic.
Is the fee worth it against the pay shown here?▾
It can be worth it if your present job already pays for the study time. The fee without visits is INR 1.80 Lakhs, while the ROI block uses INR 6 LPA as the pay marker. Use the fee as a cost check, not as the only reason to join.
Will my VTU ETR rank be safe near 420?▾
Not fully safe. The checker treats 420 as the General part-time closing point, so a rank near it should be handled with care. Keep your topic note strong, attend the interview well, and check whether your category has a wider cutoff range.
How do I get admission to this course?▾
You apply through VTU ETR, write the 100-mark test and attend the pre-registration interview. CMRIT then checks your topic and guide fit. Keep marks cards, work proof and research papers ready, because part-time admission also checks your work record.
What is the full fee for the course?▾
The full fee without visits is INR 1.80 Lakhs for 3 years. With campus visits and thesis costs, the page estimate becomes INR 2.70 Lakhs. Use the fee block above to see EMI and ROI, then confirm the exact fee with the college before paying.
Can I pay the fee in parts?▾
Yes, the fee is shown as yearly tuition in this page. The tuition fee is INR 50,000 a year, and the full tuition part is INR 1.50 Lakhs across 3 years. Ask the accounts office about the exact payment dates before you accept the seat.
What scholarships can reduce the fee?▾
The calculator shows support from INR 30,000 to INR 90,000 based on category and income. SC, ST, OBC-NCL and EWS students should keep income papers and certificates ready. Apply on the right portal early, because scholarship dates may close before admission work ends.

This page is AI assisted and human verified.

Collegedunia Team's profile photo

Collegedunia Team

Content Curator | Updated on - Sep 29, 2026

Comments


No Comments To Show