BEng Mechanical Engineering at The University of Manchester: Fees 2026 Dates & Requirements

The University of Manchester BEng Mechanical Engineering is a three-year, full-time, on-campus degree in Manchester for September 2027 entry. Indian applicants need board-specific Mathematics and Physics results, while international tuition totals £112,500 (INR 1.42 Crore) across three years.

The course builds design, manufacturing, thermofluids and modelling capability through laboratories, yearly team design projects and a final individual investigation. It suits mathematically prepared applicants seeking broad engineering practice before choosing specialist third-year units.

• A design project in every year develops progressively stronger teamwork, technical reasoning and project-management evidence.
• Compulsory workshop practice in Years 1 and 2 connects manufacturing theory with safe practical work.
• The 30-credit final-year project lets students investigate one mechanical engineering question through analysis, experiments or simulation.

Also Check: University of Manchester Mechanical Engineering admission

Manchester BEng Mechanical Engineering Fees and Living Costs 2027

The confirmed 2027/28 international tuition is £37,500 (INR 47.47 Lakhs) per year. Manchester publishes no separate programme deposit or compulsory additional course charge on the live profile.

Fee basis: The three-year tuition below is calculated as £37,500 (INR 47.47 Lakhs) multiplied by three. It excludes living, visa and travel costs and assumes the published annual rate across all three years.

All INR conversions in the article use a conversion rate of GBP 1 = INR 126.58 as of 28 October 2026. Rates fluctuate daily, verify before applying.

Source: The University of Manchester BEng Mechanical Engineering 2027 course page.

• The confirmed annual fee supports first-year planning, but the calculated total should be rechecked against each later invoice.
• Transferring to the four-year MEng changes duration and tuition, so request a revised fee schedule before switching routes.
• The course profile identifies no compulsory extra charge, but personal computing, materials and project travel still need separate budgeting.

Cost of Living in Manchester for Mechanical Engineering Students

Manchester’s cached official 2026/27 estimate covers a 41-week undergraduate academic period. It combines accommodation and normal student spending, so it remains prior-cycle planning context rather than an immigration funds test.

A first-year planning baseline is £52,340 (INR 66.25 Lakhs), comprising £37,500 (INR 47.47 Lakhs) tuition plus £14,840 (INR 18.78 Lakhs) living costs.

Extending the same inputs across three years gives a calculated baseline of £157,020 (INR 1.99 Crore). It excludes visa charges, health surcharge, flights and later living-cost increases.

Read More: UK student cost-of-living planning

Key insight: Confirmed tuition plus Manchester’s living reference creates a calculated three-year baseline of INR 1.99 Crore before scholarships, visa charges and travel.

Manchester BEng Mechanical Engineering Admission 2027

The confirmed 2027 standard offer is A*A*A in Mathematics, Physics and one other subject. Further Mathematics may replace Physics only after case-by-case review, so the standard route remains safer.

Current India-specific guidance sets exact board thresholds for direct entry. Indian applicants must satisfy the overall average and the separate Mathematics and Physics floors because one strong subject cannot offset the other.

Academic Eligibility

The table separates confirmed 2027 course requirements from current Indian board rules. Manchester makes the final equivalency decision after reviewing the board, subject mix and predicted results.

The direct-entry pattern makes Mathematics and Physics equally important. Applicants from an unlisted state board should not assume direct entry and should check the integrated foundation route instead.

Manchester prioritises previous and predicted grades, then considers programme understanding, interpersonal skills and non-academic evidence. The profile publishes no separate admissions test, portfolio or work-experience requirement.

English Language Requirements

IELTS (International English Language Testing System) requires 6.5 overall with 6.5 in every subskill. The equal component floor matters because reports, laboratory records and the individual project require consistent technical communication.

TOEFL iBT (Test of English as a Foreign Language internet-based test) has two published scales. Applicants should use only the scale shown on their test report and never self-convert.

• Book a test whose two-year validity reaches the course start because Manchester checks validity at enrolment.
• Use a Standard XII English route only after the department confirms the exact board, subject and accepted score.
• Practise technical explanation because every accepted test route imposes a component floor, not only an overall target.

Check Out: Manchester Mechanical Engineering course options

Tip for Indian students: Clear the board-specific Mathematics, Physics and overall thresholds, then confirm any school-English route before submitting the H300 application.

Manchester BEng Mechanical Engineering Application 2027

Applications are open through UCAS (Universities and Colleges Admissions Service) for the single September 2027 intake. The equal-consideration deadline is 13 January 2027, while later consideration depends on H300 vacancies.

Manchester assesses the submitted UCAS form and identifies examination performance as the main admission factor. Applicants should make predicted Mathematics and Physics results visible before adding project evidence.

Application Stages and Deadlines

The UK timestamp controls every timed submission, while the table supplies the Indian conversion. Decision and reply dates are system deadlines, so a personal offer may arrive earlier.

The safest target is 13 January 2027 at 23:30 IST because it preserves equal consideration. A June application carries vacancy risk and also misses the confirmed scholarship application deadline.

How Manchester Assesses the Form

Past results, predicted results, realistic programme understanding and interpersonal evidence all contribute to selection. However, extracurricular breadth cannot repair weak prerequisite marks because Manchester prioritises examination performance.

• Use one design, manufacturing or energy project to demonstrate realistic understanding of mechanical engineering.
• Connect Mathematics and Physics to modelling, forces, motion, heat or fluid behaviour rather than listing subjects alone.
• Ask the referee to state realistic predictions because Manchester will not reassess a refusal using later prediction updates.
• Explain readiness for laboratory, workshop and team design work because those activities recur throughout the course.

Manchester does not interview for this course, although offer-holders may receive invitations to online or campus events. Selection therefore rests on the submitted evidence rather than a later interview.

Application tip: Submit H300 by 13 January with verified predictions and one technical example connecting Mathematics and Physics to an engineering design decision.

Manchester BEng Mechanical Engineering Scholarships 2027

Eligible Indian applicants can compete for the Global Futures Scholarship worth £12,000 (INR 15.19 Lakhs) yearly. The award can reach £36,000 (INR 45.57 Lakhs) across three years when annual performance remains at 60%.

2027 award context: The application form is due on 30 March 2027 and reaches eligible offer-holders by email. Selection considers academic merit, predicted or achieved grades and the scholarship statement.

The award is open to self-funded international fee-payers domiciled in India for most of the previous three years. Applicants must enter Year 1 directly on a full-time Manchester campus course.

• Eligible qualifications are A levels, the International Baccalaureate Diploma and listed Indian national or state Standard XII boards.
• The standard H300 BEng is eligible because the excluded routes are Medicine, Dentistry, Architecture and integrated foundation years.
• Continuation requires a 60% annual result, so every later £12,000 (INR 15.19 Lakhs) reduction must remain conditional in loan planning.

Manchester also points Indian applicants toward the National Overseas Scholarship Scheme and several state-linked funding routes. These schemes impose separate identity, domicile, income or subject conditions.

The checked Manchester page does not confirm 2027 values or deadlines for those external schemes. Applicants should treat them as additional searches, not deductions from the BEng budget.

Check Out: University of Manchester scholarship information

Scholarship reality: A full Global Futures award lowers the calculated tuition-plus-living baseline to INR 1.53 Crore, but each later award depends on a 60% result.

Manchester BEng Mechanical Engineering Salary 2027

The latest provider-subject median is £32,000 (INR 40.51 Lakhs) after 15 months. It covers Manchester’s full-time Mechanical Engineering graduates, not only the three-year H300 BEng.

The exact BEng work-or-study result is 75% for the 2023/24 cohort, based on 15 respondents. This small sample supports cautious planning rather than an individual employment forecast.

Published Graduate Evidence

The salary table states each evidence scope and cohort. Later earnings use older tax-record cohorts, so they show historical progression rather than current starting pay.

Source: Discover Uni Graduate Outcomes and Longitudinal Education Outcomes data for Manchester Mechanical Engineering.

These figures are gross and UK-based, so take-home pay changes with tax, pension deductions and location. Test a £32,000 (INR 40.51 Lakhs) offer with the official UK take-home pay calculator.

Manchester identifies consultancy, construction, design, manufacturing and management as graduate sectors. One BEng alumna reports reaching Schneider Electric through career fairs, which demonstrates access rather than typical recruitment probability.

The official BEng outcomes dataset should control any borrowing analysis. Its small samples and UK-resident focus cannot establish an international graduate’s likely salary.

Return on Investment for Indian Applicants

The calculated tuition-plus-living baseline is £157,020 (INR 1.99 Crore) before visa and travel costs. The evidence cannot support a reliable payback period because salary data covers the wider subject group.

• The £32,000 (INR 40.51 Lakhs) subject median is gross, so test loan affordability with net pay from a real offer.
• A full award lowers the baseline to £121,020 (INR 1.53 Crore), but fund the gross amount until each 60% continuation result is secured.
• The 18-month Graduate visa compresses the sponsorship search, so build employer-ready evidence before the final project ends.
• BEng accreditation requires further learning for Chartered Engineer education, so price an MEng transfer or later accredited study before choosing H300.
• UK salary evidence does not value an India return, so compare local design, manufacturing, energy and automotive offers separately.

The curriculum supports several technical directions, but broad choice also requires deliberate specialisation. Use third-year options and the individual project to build evidence for one intended sector.

ROI reality: The cost can be rational only when the applicant can fund the gross baseline and convert design projects into a defined sector strategy.

UK Visa for Manchester BEng Mechanical Engineering Students 2027

The UK Student visa adds application, healthcare and financial-evidence obligations beyond Manchester’s academic budget. Graduates applying from 2027 receive an 18-month Graduate visa window before sponsorship becomes necessary.

• Budget £558 (INR 70,632) for the visa, £776 (INR 98,226) yearly for healthcare and £10,827 (INR 13.70 Lakhs) maintenance under the official Student visa route.
• The Graduate visa lasts 18 months for applications from 1 January 2027, so begin sponsorship-focused applications during the final academic year.
• Skilled Worker sponsorship usually needs £41,700 (INR 52.78 Lakhs), or £33,400 (INR 42.28 Lakhs) for qualifying new entrants, with settlement possible after five qualifying years.
• Undergraduate dependants are restricted unless a qualifying government sponsorship exception applies, so married applicants should verify eligibility before accepting the offer.

Read More: UK Graduate visa planning for Indian students

Visa reality: The 18-month post-study window makes final-year project positioning and early sponsor research more important than waiting until graduation.

Manchester BEng Mechanical Engineering Ranking 2027

Manchester places fourth in the UK for Mechanical Engineering in the QS World University Rankings by Subject 2026. This is a university subject ranking, not an H300 graduate outcome.

The ranking is relevant because it evaluates the same discipline as the BEng. However, applicants should pair reputation with accreditation, curriculum fit and the published employment sample.

The position supports disciplinary visibility but cannot predict admission, scholarship selection or employment. Use the exact-course outcome and provider-subject salary evidence for those decisions instead.

Check Out: University of Manchester subject rankings

Honest take: The subject rank strengthens the academic case, while the small employment samples make project quality and funding resilience more decisive.