Should I opt for DTU mechanical or IIIT Delhi CSE?

The choice depends on what matters the most to you. If placements, faculty and research opportunities are your top most priority, choose IIIT Delhi CSE. In this respect, IIITD CSE beats DTU Mechanical by a large margin. But if you want the best of campus, college environment, cultural fests and brand name, DTU Mechanical is a much better choice. I would personally recommend IIIT Delhi, as it offers top notch placements. But if you’re truly passionate about Mechanical, choose that branch. Do not take your interest for granted while choosing your branch/degree.

Are courses in DTU and NSIT flexible? Can students from lower branches study a minor in C.S. easily?

As an NSUT student, the new CBCS (choice based credit system) allows you to choose your fields of study. This makes for more flexible courses. Also, NSUT has an excellent coding environment which will help you for your minor in Computer Science. Many students over there pursue coding, despite being from a branch other than IT/COE. In DTU, you will have electives starting from 5th semester.These are department and general electives. IIIT Delhi offers the most flexible courses. Other than some fixed category credits, all the subjects are choice based. Thus, in terms of providing flexible courses, this is the order of preference- IIITD> NSUT>DTU.

Is JEE Advanced required for DTU B.Tech admission?

No. DTU only accepts JEE Main Paper-I scores. It is a state university, not an IIT or NIT. Admission is through JAC Delhi counselling, not JoSAA. JEE Advanced is not needed or accepted at DTU.

What is the minimum JEE Main rank needed for DTU CSE?

For Delhi Region (General category), the Round 1 closing rank for CSE in 2026 was 9,170. For Outside Delhi (General category), the closing rank was around 3,430, which is much tighter. Ranks vary by round and category. Check jacdelhi.admissions.nic.in for current round-wise data.

Is there a management quota or direct admission at DTU?

No. DTU B.Tech has no management quota. All 2,514 seats are filled strictly through JAC Delhi merit-based counselling. There is no direct admission route for B.Tech at DTU.

Does DTU reserve seats for Delhi students?

Yes. 85% of B.Tech seats at DTU are reserved for candidates who completed Class 11 and 12 from a school in NCT of Delhi. The remaining 15% are open to candidates from outside Delhi. Delhi Region candidates benefit from significantly lower cutoffs.

What is the B.Tech fee at DTU per year?

The tuition fee for B.Tech at DTU is approximately INR 2,36,700 per year. At the time of seat acceptance through JAC Delhi, candidates pay INR 95,000 as the seat acceptance fee, with the balance due at the institute. The hostel fee is separate and optional.

What exams does DTU accept for MBA admission?

DTU DSM (Delhi School of Management) accepts CAT 2025 and MAT (September/December 2025 or February/May 2026 sessions) for MBA. Applications go through the CMAC portal at cmacadmissions.com. CAT is the preferred exam. The practical shortlist cutoff for DTU MBA is around 85 percentile (General category, competitive years).

What is the minimum GATE score for M.Tech at DTU?

DTU does not publish a fixed minimum GATE score. Admission is merit-based on GATE 2026 scores. The 2025 closing GATE score for M.Tech CSE and AI at DTU was 590 out of 1000 (General category). Data Science closed at 540. Scores vary each year depending on applicant pool. Check saarthi.dtu.ac.in for the 2026 merit list.

Can final-year students apply for DTU B.Tech admission?

Yes. Students appearing in Class 12 in 2026 can register for JAC Delhi counselling. However, admission is confirmed only after the candidate submits proof of meeting the 60% aggregate in Physics, Chemistry, and Mathematics in Class 12 at the time of document verification.

How many rounds of JAC Delhi counselling are held for DTU B.Tech?

JAC Delhi 2026 conducts 4 regular rounds followed by 1 upgradation round. Each round releases seat allotment results, after which candidates must pay the seat acceptance fee and report physically. No fresh registration is allowed after June 28, 2026. Candidates who do not report in one round can still participate in the next round if they have kept their choices active.

Does DTU accept CUET scores for any programme?

Yes, but only for M.Sc admission. DTU uses CUET-PG 2026 scores for M.Sc programme admissions. B.Tech uses only JEE Main. M.Tech uses only GATE. MBA uses CAT or MAT. CUET is not accepted for B.Tech, M.Tech, or MBA at DTU.

DTU B.Tech Mechanical Engineering: Fees 2026, Course Duration, Dates, Eligibility

Component	Amount (INR)
Year 1 Fees	INR 2,47,700
Year 2 Fees	INR 2,68,700
Year 3 Fees	INR 2,86,700
Year 4 Fees	INR 3,06,700
Hostel (optional, per year)	INR 60,000
Total Fees (Hostel charges separate)	INR 11,09,800

Event	Date
JEE Main Session 1 Exam	January 21-28, 2026
JEE Main Session 2 Exam	April 2-9, 2026
JEE Main Session 2 Result	April 20, 2026
JAC Delhi Registration Opens	May 28, 2026
JAC Delhi Registration Closes	June 9, 2026
JAC Delhi Round 1 Seat Allotment	June 15, 2026
JAC Delhi Round 4 Seat Allotment	July 14, 2026
JAC Delhi Spot Round	July 23-31, 2026

Scholarship	Amount	Eligibility/Schedule
Post-Matric Scholarship for SC/ST (Delhi Govt)	Full or partial tuition fee reimbursement	SC/ST students domiciled in Delhi Apply via edistrict.delhigovt.nic.in
Central Sector Scheme of Scholarships	INR 12,000/year (Years 1-3) INR 20,000 in Year 4	Above 80th percentile in Class 12 Family income below INR 8 lakh Apply at scholarships.gov.in
Prime Minister Scholarship Scheme (PMSS)	INR 30,000/year (male) INR 36,000/year (female)	Wards or widows of ex-servicemen or Coast Guard personnel Minimum 60% in Class 12
DTU Merit Scholarship	As notified by the institute	Outstanding academic performance in previous year Notified by DTU Academic Affairs

DTU B.Tech Mechanical Engineering FAQs

Ques. What is the total fee for B.Tech Mechanical Engineering at DTU?

Ans. The total fee for B.Tech Mechanical Engineering at DTU is INR 11,09,800 over four years. Year 1 costs INR 2,47,700 including one-time admission charges, and fees rise to INR 3,06,700 in Year 4. Annual charges cover tuition, co-curricular activities, examinations, and medical charges. Hostel is optional and charged separately at around INR 60,000 per year. SC/ST and EWS students are eligible for fee concession as per Delhi Government norms.

Ques. Which entrance exam is required for B.Tech Mechanical Engineering at DTU?

Ans. A valid JEE Main 2026 score is required for admission to B.Tech Mechanical Engineering at DTU. Candidates are allotted seats through JAC Delhi counselling at jacdelhi.admissions.nic.in. Both Session 1 and Session 2 scores are accepted. Of the available 120 seats, 85% are reserved for Delhi-region candidates, and 15% are open to all-India applicants through the same counselling process.

Ques. How many seats are available in B.Tech Mechanical Engineering at DTU?

Ans. B.Tech Mechanical Engineering at DTU has 120 seats. Of these, 85% are reserved for candidates who completed Class 12 from schools within NCT of Delhi, giving a significant advantage to Delhi-region students. The remaining 15% are open to all-India candidates who compete through JAC Delhi counselling based on their JEE Main merit rank.

Ques. What are the career opportunities after B.Tech Mechanical Engineering from DTU?

Ans. Graduates from DTU’s B.Tech Mechanical Engineering programme pursue careers in automotive design, aerospace manufacturing, thermal power, robotics, and industrial automation. Many qualify for GATE-based PSU recruitment in organisations such as BHEL, NTPC, ONGC, and ISRO. M.Tech programmes in mechanical engineering disciplines at IITs and NITs are also popular among GATE-qualified graduates from DTU.

Ques. What is the scope of GATE after B.Tech Mechanical Engineering from DTU?

Ans. GATE in Mechanical Engineering (ME paper) is widely taken by DTU graduates for PSU recruitment and M.Tech admissions. PSUs such as BHEL, NTPC, HPCL, BPCL, and PowerGrid recruit through GATE scores. M.Tech programmes in thermal engineering, design, manufacturing, and aerospace are available at IITs and NITs for GATE-qualified candidates. DTU’s academic rigour gives graduates a solid foundation for the GATE syllabus.

Ques. Can students from outside Delhi apply for B.Tech Mechanical Engineering at DTU?

Ans. Yes. 15% of B.Tech Mechanical Engineering seats at DTU are reserved for all-India candidates who did not complete Class 12 from NCT of Delhi. These seats are filled through JAC Delhi counselling based on JEE Main merit rank. Candidates from outside Delhi compete in a separate merit list for these seats, and the closing rank for the all-India category tends to be tighter than the Delhi-region category.

DTU B.Tech Mechanical Engineering: Fees 2026, Course Duration, Dates, Eligibility