Is NEET UG mandatory for MBBS and BDS admission at SIMATS?

Yes, NEET UG is mandatory for both MBBS and BDS admission at SIMATS. There is no direct admission or management quota. All 250 MBBS seats and 100 BDS seats are filled through NEET UG merit via MCC Deemed University counselling.

Does SIMATS have a state quota for MBBS?

No. SIMATS is a deemed-to-be-university. 100% of MBBS and BDS seats fall under the All-India Quota and are allotted through MCC Deemed University counselling. There is no Tamil Nadu state quota or domicile reservation at SIMATS.

What is the NEET cutoff for MBBS at SIMATS?

The NEET UG 2025 closing rank for SIMATS MBBS (General category, All India) in MCC Deemed Round 1 was approximately 4,32,358. This corresponds to approximately 500 to 530 NEET marks. Actual 2026 cutoffs will depend on competition and NEET score distribution.

What is the total MBBS fee at SIMATS?

MBBS at SIMATS costs INR 25,25,000 per year. The total fee for the 5.5-year MBBS programme (including internship year) is approximately INR 1,26,25,000. Hostel and mess fees are additional.

How does MCC counselling work for SIMATS MBBS admission?

Candidates register at mcc.nic.in, pay the counselling fee, upload documents, and fill choice of college. After seat allotment, they receive an allotment letter and must report to SIMATS with originals. MCC typically conducts two to three rounds plus a stray vacancy round for deemed universities.

What is the minimum percentage for MBBS eligibility at SIMATS?

General and OBC candidates need minimum 50% aggregate in Physics, Chemistry, and Biology in Class 12. SC, ST, and PwD candidates need minimum 40%. All candidates must also have English as a subject and be at least 17 years old by December 31, 2026.

Can out-of-state students apply for B.Tech at SIMATS?

Yes. Out-of-state students can apply to Saveetha Engineering College through the SEAT (Saveetha Engineering Aptitude Test), a 30-minute online merit test available daily. Tamil Nadu residents apply via TNEA counselling. Register at admissions.saveetha.ac.in or call 8939902737.

Is there a security deposit or bond for MBBS at SIMATS?

MCC Deemed University counselling requires a security deposit of INR 2,00,000 at the time of seat acceptance. Contact the SIMATS admissions office at admission.saveetha.com for details on any additional college-level deposit or bond conditions before confirming the seat.

What is the NEET eligibility for BDS at SIMATS and how many seats are available?

BDS at SIMATS has 100 seats. Eligibility requires 10+2 with PCB and English, minimum 50% marks for General category and 40% for reserved categories. NEET UG 2026 qualification is mandatory. Seats are allotted through MCC Deemed University BDS counselling.

SIMATS Chennai B.Des Product Design: Fees 2026, Course Duration, Dates, Eligibility

Collegedunia Team

Content Curator | Updated 3+ months ago

The Bachelor of Design in Product Design at Saveetha Institute of Medical and Technical Sciences (SIMATS), Chennai, is a 4-year full-time undergraduate program offered through the Saveetha College of Architecture and Design (SCAD). The program is crafted to nurture creativity and technical expertise, preparing students for rewarding careers in product design, industrial design, and user experience. Students dive into the principles of design, innovation, and problem-solving, gaining hands-on experience to turn ideas into tangible, market-ready products. The total fee for the program is Rs. 5 Lakhs for the entire 4-year duration. Admission is merit-based on 10+2 marks, with no mandatory national entrance exam required. A standout feature of the program is a six-month internship component, both domestic and international, making graduates industry-ready.

Admissions for the 2026-27 academic session at SIMATS/SCAD are currently open. The expected last date to apply is April 15, 2026. Students are advised to apply early through the official SIMATS admissions portal (simatsadmissions.saveetha.com) as seats are limited. The new batch is expected to commence in July/August 2026.

Key Points

The program is offered through Saveetha College of Architecture and Design (SCAD), a constituent college of SIMATS Deemed University, located at Thandalam, Chennai.
Curriculum covers design principles, innovation, problem-solving, user research, usability testing, design thinking methodologies, and prototype/model making.
Specializations available: Industrial Product Design, User Experience (UX) Design, Wearable Technology Design, Automotive Product Design, and Consumer Electronics Design.
A six-month internship program (domestic and international) is a key feature, providing real-world industry exposure.
Hands-on model-making workshops using craft board and various materials are integral to the curriculum.
The university holds an A++ NAAC accreditation and is recognized by UGC.

122 Views Last Year

34 Studentsshown interest in the last 30 days

Official Link:

Go To Website

Highlights
Fees
Admission
Scholarships
FAQs

SIMATS B.Des Fees

The total fee for the B.Des Product Design program at SCAD (SIMATS) is Rs. 5,00,000 for the entire 4-year duration. The fee comprises a tuition component and a lab/studio fee, with Rs. 1,25,000 payable per year. The lab fee covers design studio resources, prototyping materials, software access, and workshop facilities. Hostel is available on campus at an additional optional cost.

Fee Structure

Fee Component	Per Year (INR)	Total - 4 Years (INR)
Tuition Fee	Rs. 25,000	Rs. 1,00,000
Lab Fee	Rs. 1,00,000	Rs. 4,00,000
Total Fees (excluding hostel)	Rs. 1,25,000	Rs. 5,00,000
Hostel Fee (optional, per year)	Rs. 22,000 - Rs. 1,50,000	(varies by room type)

Fees are refundable as per UGC refund policy norms.
Hostel is optional and not mandatory for this course.
Hostel fee varies based on room type (Non-AC: approx. Rs. 22,000/year; AC rooms: higher).
Students are advised to confirm the exact fee breakup at the time of admission from the official SCAD/SIMATS admissions office.
No EMI options are officially advertised; students may explore education loan options through banks.

SIMATS B.Des Admission 2026

Admissions to the B.Des Product Design program at SCAD (SIMATS) for 2026-27 are currently open. The process is merit-based, relying on 10+2 academic performance. There is no mandatory national-level entrance exam for this course; SIMATS may conduct its own aptitude/entrance assessment. Students are encouraged to apply online through the official portal before the deadline.

Important Dates

Event	Date
Application Opening (2026-27)	March 2026 (Open)
Application Closing (Expected)	April 15, 2026
Document Verification	After application shortlisting
Batch Commencement (Expected)	July/August 2026

Note: No mandatory national entrance exam is required for B.Des Product Design admission at SIMATS/SCAD. Admission is merit-based on 10+2 marks.

The dates mentioned above are tentative and subject to change.

Eligibility Criteria

Candidates must have passed 10+2 (or equivalent) from a recognized board.
Minimum aggregate of 50% marks in 10+2 (40% for SC/ST/OBC candidates).
Any stream (Science, Commerce, or Arts) in 10+2 is generally accepted; no specific subject restriction for B.Des Product Design.

Admission Process

Visit the official SIMATS admissions portal: simatsadmissions.saveetha.com
Register and fill the online application form with personal and academic details.
Upload required documents (10th and 12th mark sheets, transfer certificate, caste certificate if applicable, passport-size photographs, Aadhaar card).
Pay the application fee online.
Submit the application and note the application number.
Attend document verification and counselling as called by the admissions office.
Pay the course fee upon seat confirmation to secure admission.

SIMATS B.Des Scholarships 2026

SIMATS/SCAD offers a range of scholarships to meritorious and deserving students. The university's scholarship policy covers merit-based, need-based, sports-based, and research/innovation-based awards. Students from economically weaker sections can benefit from the SIMATS Freeship scheme. Additionally, national and state government scholarships are available for eligible students.

Scholarship Details

Scholarship	Eligibility	Benefit
SIMATS Merit Scholarship - 1st Rank	1st position in university exam	40% tuition fee waiver
SIMATS Merit Scholarship - 2nd Rank	2nd position in university exam	30% tuition fee waiver
SIMATS Merit Scholarship - 3rd Rank	3rd position in university exam	20% tuition fee waiver
SIMATS Merit Scholarship - 4th Rank	4th position in university exam	15% tuition fee waiver
SIMATS Merit Scholarship - 5th Rank	5th position in university exam	10% tuition fee waiver
SIMATS Freeship (Need-Based)	Economically weaker students with merit	Up to 100% tuition + hostel fee waiver
Sports Scholarship	National level players	50% fee waiver
Sports Scholarship	State level players	25% fee waiver
Sports Scholarship	District level players	20% fee waiver
NSP (PM-USP) Yojana	80% in Class 12, parental income up to Rs. 4.5 Lakhs, AICTE-recognized course	Rs. 82,000 per annum
Tamil Nadu Post-Matric Scholarship (SC/ST)	SC/ST students, income criteria apply	As per government norms
Tamil Nadu BC/MBC/DNC Post-Matric Scholarship	BC/MBC/DNC students	As per government norms
Endowment Scholarships	Based on donor availability	Variable

Merit scholarships are awarded based on university examination performance each academic year.
The SIMATS Freeship is subject to approval by the scholarship selection committee; the decision of the committee is final.
NSP (PM-USP) requires students to maintain 50% marks and 75% attendance throughout the course.
Government scholarships require students to apply separately through the respective government portals.
Scholarship awards are subject to continued academic performance and compliance with university norms.

SIMATS B.Des FAQs

Ques. What makes the B.Des Product Design program at SCAD (SIMATS) different from other design programs?

Ans. The B.Des Product Design at SCAD stands out for its six-month internship program, which includes both domestic and international placements, making graduates industry-ready. The curriculum also includes hands-on model-making workshops, user research, design thinking methodologies, and prototype development, giving students a comprehensive, practice-oriented education.

Ques. Is any entrance exam required for admission to B.Des Product Design at SIMATS/SCAD?

Ans. No mandatory national-level entrance exam (such as UCEED or NID DAT) is required for admission to B.Des Product Design at SIMATS/SCAD. Admission is primarily merit-based on 10+2 marks. SIMATS may conduct its own internal aptitude assessment; candidates should check the latest admission notification on the official website.

Ques. What is the total fee for B.Des Product Design at SCAD (SIMATS)?

Ans. The total fee for the 4-year program is Rs. 5,00,000 (Rs. 1,25,000 per year), comprising a tuition fee of Rs. 25,000 per year and a lab fee of Rs. 1,00,000 per year. The lab fee covers design studio resources, prototyping materials, software access, and workshop facilities. Hostel is optional and available at an additional cost.

Ques. What are the career options after completing B.Des Product Design from SCAD (SIMATS)?

Ans. Graduates can pursue careers as UX Designers, Industrial Designers, Furniture Designers, CAD Technicians, Color Technologists, Materials Engineers, Interaction Designers, Product Development Specialists, and Clothing and Textile Technologists. They can work with product design firms, manufacturing companies, automotive companies, consumer electronics brands, and design consultancies. Starting salaries for B.Des Product Design graduates in India typically range from Rs. 3 LPA to Rs. 7 LPA.

Ques. Does the B.Des Product Design program at SCAD include international internship opportunities?

Ans. Yes, the B.Des Product Design program at SCAD includes a six-month internship program that offers placements both within India and abroad. This is a distinctive feature of the program, providing students with real-world industry exposure and international networking opportunities before graduation.

Ques. What specializations are available within the B.Des Product Design program at SCAD?

Ans. The B.Des Product Design program at SCAD offers specializations in Industrial Product Design, User Experience (UX) Design, Wearable Technology Design, Automotive Product Design, and Consumer Electronics Design. Students can align their studies with their career interests through these focused specialization tracks.