Is NEET UG mandatory for MBBS and BDS admission at SIMATS?

Yes, NEET UG is mandatory for both MBBS and BDS admission at SIMATS. There is no direct admission or management quota. All 250 MBBS seats and 100 BDS seats are filled through NEET UG merit via MCC Deemed University counselling.

Does SIMATS have a state quota for MBBS?

No. SIMATS is a deemed-to-be-university. 100% of MBBS and BDS seats fall under the All-India Quota and are allotted through MCC Deemed University counselling. There is no Tamil Nadu state quota or domicile reservation at SIMATS.

What is the NEET cutoff for MBBS at SIMATS?

The NEET UG 2025 closing rank for SIMATS MBBS (General category, All India) in MCC Deemed Round 1 was approximately 4,32,358. This corresponds to approximately 500 to 530 NEET marks. Actual 2026 cutoffs will depend on competition and NEET score distribution.

What is the total MBBS fee at SIMATS?

MBBS at SIMATS costs INR 25,25,000 per year. The total fee for the 5.5-year MBBS programme (including internship year) is approximately INR 1,26,25,000. Hostel and mess fees are additional.

How does MCC counselling work for SIMATS MBBS admission?

Candidates register at mcc.nic.in, pay the counselling fee, upload documents, and fill choice of college. After seat allotment, they receive an allotment letter and must report to SIMATS with originals. MCC typically conducts two to three rounds plus a stray vacancy round for deemed universities.

What is the minimum percentage for MBBS eligibility at SIMATS?

General and OBC candidates need minimum 50% aggregate in Physics, Chemistry, and Biology in Class 12. SC, ST, and PwD candidates need minimum 40%. All candidates must also have English as a subject and be at least 17 years old by December 31, 2026.

Can out-of-state students apply for B.Tech at SIMATS?

Yes. Out-of-state students can apply to Saveetha Engineering College through the SEAT (Saveetha Engineering Aptitude Test), a 30-minute online merit test available daily. Tamil Nadu residents apply via TNEA counselling. Register at admissions.saveetha.ac.in or call 8939902737.

Is there a security deposit or bond for MBBS at SIMATS?

MCC Deemed University counselling requires a security deposit of INR 2,00,000 at the time of seat acceptance. Contact the SIMATS admissions office at admission.saveetha.com for details on any additional college-level deposit or bond conditions before confirming the seat.

What is the NEET eligibility for BDS at SIMATS and how many seats are available?

BDS at SIMATS has 100 seats. Eligibility requires 10+2 with PCB and English, minimum 50% marks for General category and 40% for reserved categories. NEET UG 2026 qualification is mandatory. Seats are allotted through MCC Deemed University BDS counselling.

SIMATS Chennai B.Sc Dental Technology: Fees 2026, Course Duration, Dates, Eligibility

Collegedunia Team

Content Curator | Updated 3+ months ago

B.Sc (Dental Technology) at SIMATS Chennai is a 3-year full-time undergraduate programme offered by the Saveetha Tessellation Centre (STC) at Saveetha Dental College (SDC), a constituent college of Saveetha Institute of Medical and Technical Sciences (SIMATS). The course aims to provide students with theoretical and practical expertise in all types of dental restorations, enabling them to utilise the latest technology to deliver the best quality dental prosthetics and appliances. The curriculum covers Prosthodontics, Crown and Bridge, Implantology, Orthodontics, and in the final year, digital designing protocols including CAD-CAM (Computer-Aided Design and Manufacturing). The total fees for the programme are Rs. 3,15,000 for the 3-year duration (Rs. 1,05,000 per year). A standout feature of this programme is the massive clinical exposure: students handle over 300 cases in a single year, a number unmatched by most institutes even over the entire course duration. The programme is offered in full-time, on-campus mode and is ideal for students seeking a career in dental laboratories, dental technology companies, or those planning to pursue M.Sc Dental Technology or M.Sc CAD CAM Dentistry.

Admissions for the 2026-27 academic year are currently open. Applications can be submitted online at simatsadmissions.saveetha.com. Admission is merit-based on Class 12 marks; NEET UG is not required for this programme. Based on previous year trends, classes typically commence in July/August 2026.

Key Points

The programme is offered through the Saveetha Tessellation Centre (STC), which handles the entire combined case flow of Saveetha Dental College, providing students with unparalleled clinical exposure of over 300 cases per year.
Students are trained by Prosthodontists, gaining direct understanding of the clinical implications of their dental technology work, which is a significant advantage over programmes taught only by technicians.
The final year includes training in digital designing protocols including CAD-CAM, scanners, modelling and planning software, and additive/subtractive fabrication techniques, making graduates industry-ready for modern dental labs.
SIMATS offers M.Sc Dental Technology (2 years, Rs. 70,000/year) and M.Sc CAD CAM Dentistry (2 years, Rs. 70,000/year) as direct postgraduate progression pathways within the same institution.
Saveetha Dental College is ranked No. 1 in India for Dentistry (NIRF 2025) and is NAAC A++ accredited, providing a world-class dental education ecosystem for Dental Technology students.

88 Views Last Year

27 Studentsshown interest in the last 30 days

Official Link:

Go To Website

Highlights
Fees
Admission
Scholarships
FAQs

SIMATS B.Sc (Dental Technology) Fees

The B.Sc (Dental Technology) programme at SIMATS is priced at Rs. 1,05,000 per year, making the total fee Rs. 3,15,000 for the 3-year course. This is competitive for a programme at India's No. 1 ranked dental college with access to the full clinical case flow of Saveetha Dental College. Hostel accommodation is available on campus at an additional cost.

Fee Structure

Fee Component	Per Year (INR)	Total 3 Years (INR)
Course Fee	1,05,000	3,15,000
Total Academic Fee	1,05,000	3,15,000
Hostel Fee (approx.)	As per hostel type (optional)	-
Total Fees (without hostel)	1,05,000	3,15,000

Hostel accommodation is available on campus; fees vary based on room type.
Contact the admissions office for current hostel fee details.
Fee payment can be made via Demand Draft or RTGS/Electronic Fund Transfer.
Fees are subject to revision by the university; candidates are advised to verify the latest fee structure at the time of admission from the official website (saveethadental.com or saveetha.com).
No management quota or capitation fee is charged.

SIMATS B.Sc (Dental Technology) Admission 2026-27

Admissions to the B.Sc (Dental Technology) programme at SIMATS for 2026-27 are currently open. The process is merit-based, with selection based on Class 12 marks. NEET UG is not required for this programme. The application process is entirely online through the SIMATS admissions portal.

Important Dates

Event	Date
Application Portal Opens	March 2026 (Ongoing)
Application Mode	Online (simatsadmissions.saveetha.com)
Application Deadline	Rolling admissions; apply early
Document Verification and Offer Letter	Within 1-2 days of application
Commencement of Classes	July/August 2026 (Tentative)
Contact (Toll Free)	1800 123 746287
WhatsApp Enquiry	7092180202 (Message Only)

Note: No entrance examination is required for B.Sc Dental Technology at SIMATS. Admission is merit-based on Class 12 marks.

The dates mentioned above are tentative and subject to change.

Eligibility Criteria

Candidates must have passed Class 10+2 (or equivalent) from a recognised board.
Science subjects (Physics, Chemistry, Biology) in Class 12 are preferred.
Minimum aggregate marks as per university norms (typically 45%-50% in qualifying examination).
Candidates must be at least 17 years of age as on December 31 of the year of admission.
NEET UG score is NOT required for B.Sc Dental Technology admission.

Admission Process

Visit the official SIMATS admissions portal: simatsadmissions.saveetha.com
Register and fill in the online application form with personal and academic details.
Upload required documents: Class 10 and 12 mark sheets, transfer certificate, community certificate (if applicable), passport-size photographs, and Aadhaar card.
Submit the application and pay the application fee online.
Shortlisted candidates will be contacted for document verification and admission confirmation.
Pay the prescribed course fee at the time of admission.
Report to the college on the specified date with original certificates for verification.

SIMATS B.Sc (Dental Technology) Scholarships 2026-27

SIMATS offers merit-based and sports-based scholarships to eligible students. Government scholarships through the Tamil Nadu e-Scholarship portal and the National Scholarship Portal are also available for eligible students from reserved categories. Given the affordable fee structure of Rs. 1,05,000 per year, scholarships can significantly reduce the financial burden for deserving students.

Scholarship Details

Scholarship / Concession	Eligibility	Benefit
SIMATS Merit Scholarship	Top-performing students based on Class 12 marks	Fee waiver/reduction as per institutional norms
Sports Scholarship - National Level	Students who represented at national level	50% tuition fee waiver
Sports Scholarship - State Level	Students who represented at state level	25% tuition fee waiver
Sports Scholarship - District Level	Students who represented at district level	20% tuition fee waiver
Sports Scholarship - Zonal Level	Students who represented at zonal level	10% tuition fee waiver
Tamil Nadu Government Scholarship (BC/MBC)	BC/MBC students from Tamil Nadu	As per government norms
Tamil Nadu Government Scholarship (SC/ST)	SC/ST students from Tamil Nadu	As per government norms
Central Government Post-Matric Scholarship	SC/ST students	As per Central Government norms
Education Loan	All eligible students	Available through nationalised banks

Students must apply for government scholarships through the respective state/central portals within the stipulated deadlines.
Valid community and income certificates are required to avail government scholarships.
Contact the SIMATS admissions office for details on institutional scholarships.

SIMATS B.Sc (Dental Technology) FAQs

Ques. Is NEET required for admission to B.Sc (Dental Technology) at SIMATS?

Ans. No, NEET UG is not required for admission to B.Sc Dental Technology at SIMATS. Admission is merit-based on Class 12 marks. Students can apply directly through the SIMATS admissions portal at simatsadmissions.saveetha.com.

Ques. What makes the B.Sc Dental Technology programme at Saveetha Dental College unique?

Ans. The programme is offered through the Saveetha Tessellation Centre (STC), which handles the entire combined case flow of Saveetha Dental College, India's No. 1 ranked dental college. Students handle over 300 cases in a single year, which is unmatched by most institutes even over the entire course duration. Students are trained by Prosthodontists, gaining direct clinical insight into their work. The final year includes training in CAD-CAM digital designing protocols, making graduates ready for modern digital dental labs.

Ques. What are the career options after B.Sc (Dental Technology) from SIMATS?

Ans. Graduates can work as Dental Technicians, Dental Lab Managers, CAD-CAM Technicians, or Dental Prosthetics Specialists in dental laboratories, dental clinics, dental technology companies, and hospitals. With CAD-CAM training, graduates are also eligible for roles in digital dentistry companies. Entry-level salaries typically range from Rs. 2.5 Lakhs to Rs. 5 Lakhs per annum, with experienced professionals earning Rs. 6 Lakhs to Rs. 10 Lakhs per annum. Strong international opportunities exist in the USA, UK, Middle East, and Australia.

Ques. Can B.Sc Dental Technology graduates pursue postgraduate studies at SIMATS?

Ans. Yes, SIMATS offers M.Sc Dental Technology (2 years, Rs. 70,000/year) and M.Sc CAD CAM Dentistry (2 years, Rs. 70,000/year) as direct postgraduate progression pathways for B.Sc Dental Technology graduates within the same institution. These programmes focus on advanced CAD-CAM design, digital prosthodontics, implantology, and orthodontics, significantly enhancing career prospects.

Ques. What is the difference between B.Sc Dental Technology and Diploma in Dental Technology at SIMATS?

Ans. Both programmes are offered at Saveetha Dental College. The B.Sc Dental Technology is a 3-year degree programme (Rs. 1,05,000/year) that provides a comprehensive education in dental technology including digital designing in the final year. The Diploma in Dental Technology is a 2-year programme (Rs. 1,30,000/year) that is DCI-recognised and is more suitable for those who already have some background in the field or are looking for a shorter certification. The B.Sc degree provides better career prospects and is the preferred qualification for postgraduate studies.

Ques. Can students from outside Tamil Nadu apply for B.Sc (Dental Technology) at SIMATS?

Ans. Yes, students from all states across India are eligible to apply. There are no state-specific restrictions for this course. The entire admission process can be completed online, and students need to visit the campus only for original document verification at the time of joining.