Is NEET UG mandatory for MBBS and BDS admission at SIMATS?

Yes, NEET UG is mandatory for both MBBS and BDS admission at SIMATS. There is no direct admission or management quota. All 250 MBBS seats and 100 BDS seats are filled through NEET UG merit via MCC Deemed University counselling.

Does SIMATS have a state quota for MBBS?

No. SIMATS is a deemed-to-be-university. 100% of MBBS and BDS seats fall under the All-India Quota and are allotted through MCC Deemed University counselling. There is no Tamil Nadu state quota or domicile reservation at SIMATS.

What is the NEET cutoff for MBBS at SIMATS?

The NEET UG 2025 closing rank for SIMATS MBBS (General category, All India) in MCC Deemed Round 1 was approximately 4,32,358. This corresponds to approximately 500 to 530 NEET marks. Actual 2026 cutoffs will depend on competition and NEET score distribution.

What is the total MBBS fee at SIMATS?

MBBS at SIMATS costs INR 25,25,000 per year. The total fee for the 5.5-year MBBS programme (including internship year) is approximately INR 1,26,25,000. Hostel and mess fees are additional.

How does MCC counselling work for SIMATS MBBS admission?

Candidates register at mcc.nic.in, pay the counselling fee, upload documents, and fill choice of college. After seat allotment, they receive an allotment letter and must report to SIMATS with originals. MCC typically conducts two to three rounds plus a stray vacancy round for deemed universities.

What is the minimum percentage for MBBS eligibility at SIMATS?

General and OBC candidates need minimum 50% aggregate in Physics, Chemistry, and Biology in Class 12. SC, ST, and PwD candidates need minimum 40%. All candidates must also have English as a subject and be at least 17 years old by December 31, 2026.

Can out-of-state students apply for B.Tech at SIMATS?

Yes. Out-of-state students can apply to Saveetha Engineering College through the SEAT (Saveetha Engineering Aptitude Test), a 30-minute online merit test available daily. Tamil Nadu residents apply via TNEA counselling. Register at admissions.saveetha.ac.in or call 8939902737.

Is there a security deposit or bond for MBBS at SIMATS?

MCC Deemed University counselling requires a security deposit of INR 2,00,000 at the time of seat acceptance. Contact the SIMATS admissions office at admission.saveetha.com for details on any additional college-level deposit or bond conditions before confirming the seat.

What is the NEET eligibility for BDS at SIMATS and how many seats are available?

BDS at SIMATS has 100 seats. Eligibility requires 10+2 with PCB and English, minimum 50% marks for General category and 40% for reserved categories. NEET UG 2026 qualification is mandatory. Seats are allotted through MCC Deemed University BDS counselling.

SIMATS Chennai Ph.D Mechanical Engineering: Fees 2026, Course Duration, Dates, Eligibility

Collegedunia Team

Content Curator | Updated 3+ months ago

The Ph.D. in Mechanical Engineering at Saveetha Institute of Medical And Technical Sciences (SIMATS), Chennai, is a 3-year full-time doctoral research program offered through the Department of Mechanical Engineering at SIMATS Engineering (formerly Saveetha Engineering College). Established in 2003, the Mechanical Engineering department focuses on next-generation research areas including Sustainable Design, Smart Manufacturing and Automation, Robotics, Mechatronics, Industrial IoT, Thermal and Renewable Energy Systems, and Advanced Manufacturing. The department has multiple Centres of Excellence, an Anna University-recognized research centre, and faculty actively engaged in cutting-edge research projects and industry collaborations. The total tuition fee for the Ph.D. program is Rs. 75,000 over 3 years (Rs. 25,000 per year). SIMATS is a NAAC A++ accredited deemed university with a strong research ecosystem, having received over Rs. 10 crores in research funding from BRNS, DSIR, DST, AICTE, and CSIR. The Ph.D. in Mechanical Engineering at SIMATS is popular among M.E./M.Tech. (Mechanical Engineering) graduates and working engineers who wish to pursue advanced research in manufacturing, energy, robotics, and sustainable engineering.

Admissions for the 2026-27 academic year are currently ongoing. Applications are accepted through the SIMATS admissions portal at simatsadmissions.saveetha.com. Candidates with valid GATE (Mechanical Engineering paper) scores are given preference. The university also conducts its own entrance test (SUCET) for candidates without a qualifying national exam score. Admissions typically open between June and August each year, with the academic session commencing in the second half of the year.

Key Points

The Mechanical Engineering department focuses on cutting-edge research in Sustainable Design, Smart Manufacturing, Automation, Robotics, Mechatronics, Industrial IoT, and Thermal and Renewable Energy Systems.
Multiple Centres of Excellence in the Mechanical Engineering department, with access to advanced 3D printing, CNC machines, simulation tools for thermal, structural, and fluid flow analysis, and industrial robotics setups.
Anna University-recognized research centre in Mechanical Engineering at SIMATS Engineering.
Faculty members are actively engaged in research projects and industry collaborations, with recent MoU signings with leading industry partners.
Research is supported by the broader SIMATS Engineering ecosystem, which has received over Rs. 10 crores in funding from BRNS, DSIR, DST, AICTE, and CSIR.
Candidates with valid GATE (Mechanical Engineering) scores are given preference; others may qualify through the university's own entrance test (SUCET).
The minimum duration is 3 years (full-time); the program may be extended up to 6 years as per UGC Ph.D. regulations.

Official Link:

Go To Website

Highlights
Fees
Admission
Scholarships
FAQs

SIMATS Ph.D. (Mechanical Engineering) Fees

The Ph.D. in Mechanical Engineering at SIMATS is priced at Rs. 25,000 per year, totaling Rs. 75,000 for the entire 3-year minimum duration program. This is a highly competitive fee for a research program at a NAAC A++ accredited deemed university with well-equipped mechanical engineering laboratories and research infrastructure. Students should verify any additional charges such as examination fees, registration fees, or thesis submission fees at the time of admission. Hostel accommodation is optional and available on campus.

Tuition Fee Structure

Fee Component	Amount (Rs.)
Tuition Fee - Year 1	25,000
Tuition Fee - Year 2	25,000
Tuition Fee - Year 3	25,000
Total Fees (3 years minimum, excluding hostel)	75,000

Hostel Fees (Optional)

Room Type	Annual Fee (Rs.)
Super Deluxe Single Room	1,50,000
Super Deluxe Double Room	90,000
Single Room with Attached Bath	45,000
Single Room	35,000
Double Room	30,000

The fee of Rs. 25,000 per year is as reported from available sources; students must verify the exact and current fee structure directly from the SIMATS Engineering admissions office before applying, as fees may be revised.
Additional charges such as examination fees, registration fees, or thesis submission fees may apply and are not included in the above figures.
Hostel accommodation is optional.
Students can apply for hostel through the SIMATS campus facilities portal.
For fee-related queries, contact: 78248 82748 / 8939994247 or email: admissions.simats@saveetha.com.

SIMATS Ph.D. (Mechanical Engineering) Admission 2026

Admissions to the Ph.D. (Mechanical Engineering) program at SIMATS are based on merit and entrance test performance. Candidates with valid GATE (Mechanical Engineering paper) scores are given preference and may be exempted from the university entrance test. Admissions typically open between June and August, with the academic session commencing in the second half of the year. The 2026-27 admissions are expected to follow a similar timeline.

College Admission Dates

Event	Tentative Date
Application Portal Opens	June 2026 (tentative)
Application Deadline	July 2026 (tentative)
Entrance Test (SUCET) / Interview	July - August 2026 (tentative)
Results / Merit List	August 2026 (tentative)
Batch Commencement	August - September 2026 (tentative)

GATE Exam Dates

Exam	Event	Date
GATE 2026 (Mechanical Engineering)	Registration Start	August 28, 2025
GATE 2026 (Mechanical Engineering)	Registration End	October 13, 2025
GATE 2026 (Mechanical Engineering)	Admit Card Release	January 13, 2026
GATE 2026 (Mechanical Engineering)	Exam Dates	February 7, 8, 14, 15, 2026
GATE 2026 (Mechanical Engineering)	Answer Key Release	February 19, 2026
GATE 2026 (Mechanical Engineering)	Result	March 19, 2026

Note: GATE (Mechanical Engineering paper) is the primary national exam accepted for Ph.D. Mechanical Engineering admissions. A valid GATE score gives preference in admissions and may qualify candidates for MHRD/AICTE fellowships.

The dates mentioned above are tentative and subject to change.

Eligibility Criteria

Candidates must hold an M.E./M.Tech. in Mechanical Engineering or a related discipline from a recognized university with a minimum of 55% marks (50% for SC/ST/OBC/PwD candidates).
Candidates with valid GATE (Mechanical Engineering) scores are given preference; others must qualify the university's own entrance test (SUCET).
The candidate must not be enrolled in any other full-time academic program simultaneously.
A research proposal in the chosen area of Mechanical Engineering research is typically required at the time of interview.

Admission Process

Visit the official SIMATS admissions portal at simatsadmissions.saveetha.com and apply online for the Ph.D. (Mechanical Engineering) program.
Pay the application fee (as applicable) and submit required documents including postgraduate degree certificate, mark sheets, GATE scorecard (if applicable), and identity proof.
Candidates without GATE qualification must appear for the university's entrance test (SUCET).
Shortlisted candidates are called for a research proposal presentation and interview before the Doctoral Committee of the Mechanical Engineering department.
Final selection is based on entrance test score, interview performance, and availability of a suitable research supervisor (guide) in the chosen research area.
For enquiries, contact: 78248 82748 / 8939994247 or email: admissions.simats@saveetha.com.

SIMATS Ph.D. (Mechanical Engineering) Scholarships 2026

Ph.D. scholars in Mechanical Engineering at SIMATS may be eligible for various scholarships and fellowships. Candidates with valid GATE scores may qualify for MHRD/AICTE fellowships. The department's active research projects funded by DST, AICTE, and CSIR may also provide project-based stipends for scholars. Government scholarship schemes for SC/ST/OBC candidates are additionally available.

Scholarship Details

Scholarship / Fellowship	Details
GATE-based MHRD Fellowship	Monthly stipend for GATE-qualified Ph.D. scholars admitted to AICTE-approved institutions; amount as per AICTE norms (typically Rs. 12,400 - 25,000/month)
UGC-JRF (Junior Research Fellowship)	Monthly stipend of Rs. 37,000 (first 2 years) and Rs. 42,000 (subsequent years) for UGC-NET JRF qualified candidates
Government of India Post-Matric Scholarship (SC/ST/OBC)	Available for eligible candidates from reserved categories; amount varies by state and category
State Government Scholarships (Tamil Nadu)	Tamil Nadu government offers scholarships for students from economically weaker sections pursuing higher education
SIMATS Research Project Stipend	Scholars working on externally funded research projects at SIMATS may receive project-based stipends; enquire with the Mechanical Engineering research office

GATE-based fellowship eligibility depends on AICTE norms; candidates should verify with the admissions office.
JRF stipend amounts are as per UGC norms and are subject to revision; always check the latest circulars for current stipend rates.
Students from SC/ST/OBC categories should check the National Scholarship Portal (scholarships.gov.in) for applicable central government schemes.
For scholarship-related queries, contact the SIMATS Engineering admissions office directly.

SIMATS Ph.D. (Mechanical Engineering) FAQs

Ques. What are the main research areas available for Ph.D. in Mechanical Engineering at SIMATS?

Ans. The Mechanical Engineering department at SIMATS Engineering focuses on research in Sustainable Design, Smart Manufacturing and Automation, Robotics, Mechatronics, Industrial IoT, Thermal and Renewable Energy Systems, Advanced Manufacturing (3D printing, additive manufacturing), CAD/CAM, Fluid Mechanics, Heat Transfer, and Industry 4.0 applications. The specific research topic depends on the availability of a suitable research supervisor in the department.

Ques. Is GATE mandatory for Ph.D. (Mechanical Engineering) admission at SIMATS?

Ans. No, GATE is not mandatory but is strongly preferred. Candidates with valid GATE (Mechanical Engineering paper) scores are given preference and may be exempted from the university's own entrance test (SUCET). Candidates without GATE must qualify the SUCET entrance test conducted by SIMATS.

Ques. What research infrastructure is available for Ph.D. scholars in Mechanical Engineering at SIMATS?

Ans. The Mechanical Engineering department has multiple Centres of Excellence, advanced 3D printing and CNC machines for real-time prototyping, state-of-the-art simulation tools for thermal, structural, and fluid flow analysis, and industrial robotics setups. The department also has an Anna University-recognized research centre and active industry collaborations through MoUs with leading companies.

Ques. What is the total fee for Ph.D. in Mechanical Engineering at SIMATS?

Ans. The total tuition fee is Rs. 75,000 over 3 years (Rs. 25,000 per year). Additional charges such as examination fees, registration fees, and thesis submission fees may apply. Students are advised to verify the complete fee structure from the admissions office before joining.

Ques. Can I pursue Ph.D. in Mechanical Engineering at SIMATS if I have a background in related fields like Automobile Engineering or Production Engineering?

Ans. Yes. Candidates with M.E./M.Tech. in related disciplines such as Automobile Engineering, Production Engineering, Manufacturing Engineering, Thermal Engineering, or Industrial Engineering are generally eligible for Ph.D. in Mechanical Engineering at SIMATS. The final eligibility is subject to the university's admission committee decision and the availability of a suitable research supervisor.

Ques. What is the minimum and maximum duration for the Ph.D. in Mechanical Engineering at SIMATS?

Ans. The minimum duration is 3 years (full-time). As per UGC Ph.D. regulations, the maximum duration is typically 6 years, with possible extensions in exceptional cases. Students are expected to complete their coursework, research, and thesis submission within this period.

Course Finder

Search from 20K+ Courses and 35+ Streams

SIMATS Chennai Ph.D Mechanical Engineering: Fees 2026, Course Duration, Dates, Eligibility

Table of Contents