Master of Engineering [ME] (Thermal Engineering) - Course Overview

  • STREAM

    ENGINEERING

  • DURATION

    2 YEARS

  • COURSE

    Mechanical Engineering

  • COURSE TYPE

    Post Graduation

    Master of Engineering [ME] (Thermal Engineering) Top Colleges, Syllabus, Scope and Salary

    Sakshi Gupta Sakshi Gupta
    Content Curator

    M.E. Thermal Engineering is a Post Graduate course in the domain of mechanical engineering with a specialization in the field of thermal process and thermodynamics related aspects. The structure of the course is based on the semester-wise breakup of examination. A minimum of 55% (relaxable for reserved category candidates) marks at UG level is the least which almost all the institutes desire from applying candidates as the eligibility criterion.

    Some of the popular colleges offering the course are:

    The range of average fee for the course varies between INR 60,000 to 4, 50,000 in India. The variation in fee is based on the location and nature of university (that is government, state/private/deemed etc.).

    Admissions to the course are done based on Common Entrance Test (CET) based selection method as well as merit-based selection criteria that is the percentage of marks obtained at Under Graduate (UG) level. Most of the colleges who provide admissions through CET mechanism rely on the score of All India level common entrance exams like GATE (Graduate Aptitude Test for Engineering), while a select few opt for a separate entrance exam of their own (Like LPUNEST).

    The course is designed to dissipate skills and knowledge to the master’s level students that are sufficient to provide them a holistic knowledge of the subject. This would enable them to take on the day to day challenges that would come in the persecution of their skill at the practical level.

    M.E. Thermal Engineering postgraduates have a wide range of job opportunities like Safety engineer, Project engineer, Structural engineer, Design engineer etc. After completion of post graduation, students can pursue further studies (like M.Phil and Ph.D.) in the said subject or may take up job opportunities associated. The average salary ranges between INR 16,000 and 20,000 a month for a fresh pass out.

    M.E. Thermal Engineering: Course Highlights

    Course LevelPost Graduate
    Duration of the Course2 years
    Examination TypeSemester-wise
    EligibilityMinimum score of 55% (Relaxable for reserved category students) marks at UG level.
    Admission ProcessEntrance exam based/Merit-based
    Course FeeBetween INR 60,000 to 4.50 Lacs
    Average Starting SalaryINR 16,000 to 20,000
    Top Recruiting CompaniesSteel India, Power Grid of India, NTPC, Discoms, Renewable Energy producers
    Job PositionSafety engineer, Project engineer, Structural engineer, Design engineer

    M.E. Thermal Engineering: What is it about?

    Study of temperature that is the degree of hotness or coolness of substance, or structure is the concerned area for thermal studies. Today, where power is generated at large scale and distributed through multiple channels the importance of thermal studies, has become all the more important.  

    As a sub-division of Mechanical Engineering, Thermal engineering deals with thermal properties of materials, body, and substances so, as to define their usage and utility in design and structuring of power generation equipment that dissipate heat in large amount.

    A master’s level course in this specialization of mechanical engineering aims at providing in-depth subject knowledge and skills to the bachelor’s pass out so as to build the competence and ability in them to handle the practical life challenges that would be put forward to them at the industrial level.

    M.E. Thermal Engineering: Top Institutes 

    Thermal Engineering as a specialization of Mechanical engineering is offered as M.E. level course by many reputed colleges/universities to candidates who have passed their UG or equivalent examination from a recognized state or central University.

    For your reference, we have tabled down a list of various colleges/universities that are offering this course in India.

    InstituteCityAverage Fee Per annum basis
    AD Patel Institute of TechnologyVidyanagarINR 76,470
    Adhiparasakthi Engineering CollegeVelloreINR 45,500
    Anna UniversityMaduraiINR 39,000
    Arunai Engineering CollegeTiruvannamalaiINR 56,000
    B.M. College of TechnologyIndoreINR 60,000
    Chaitanya Bharathi Institute of TechnologyHyderabadINR 90,750
    CKECCoimbatoreINR 60,000
    IITMumbaiINR 43,220
    CMS College of EngineeringEranapuramINR 46, 420
    Excel Engineering CollegeNamakkalINR 50,000

    M.E. Thermal Engineering: Eligibility

    Candidate must have passed the B.E/B.Tech or equivalent examination in Mechanical engineering/Automobile engineering/Production engineering/Mechanotronics/Aeronautical/Production engineering stream from a recognized state/private/deemed or central University with at least 55% (relaxable for reserved category candidates) of the marks.

    • He/She shall not be having any backlog or compartment in any of the Subject/Subjects at UG level that is yet to be cleared at the time of taking admissions.
    • Apart from the above-mentioned eligibility criteria’s various colleges and institutes may have their own additional criteria’s which the students would have to satisfy in order to take admission (like work experience of certain years).
    • In case of reserved category students, they would have to present their reservation certificates issued by the competent authorities in order to avail the benefits applicable to them.
    • Most of the Institute give admissions through Common Entrance Test (CET) (like GATE). To get admissions in these institutes candidates would have to qualify the respective entrance exam by securing minimum qualifying marks.

    The eligibility criteria’s mentioned above are common for most of the universities and colleges across the country that are offering this course to the students.

    M.E. Thermal Engineering: Admission Process

    Master’s of Engineering in Thermal Engineering course admission process involves a common entrance test based admission process (as seen across various universities and colleges in the country). 

    • Most of the Universities/Colleges conduct a common entrance test for admission into M.E courses (like LPUNEST) or take admissions through commonly held entrance exam like GATE. Hence students would have to make an application for such exams.
    • Students have to qualify these exams (for which they should be eligible to appear) in order to get admission in the course.
    • After the conduct of the test, a merit list of finally qualified candidates is prepared and candidates are invited for counseling cum admission process by the respective university or college.
    • After counseling cum admission process final allotment of seats to the candidate takes place and the candidate is asked to deposit the fee for the course and register for the respective academic year.
    • The new academic year begins after the completion of all the above processes.

    Admission process would more or less be same across all the colleges and universities that are offering this course.

    M.E. Thermal Engineering: Syllabus and Course description

    The syllabus of the course is divided into four semesters spread over a span of two years. The syllabus of the course is divided into various subjects and practical skills that students are taught during the course of their post-graduation. The syllabus covers all the aspects related to thermal engineering so as to provide a holistic understanding of the subject to the master’s level students.

    The details regarding the syllabus of the course are mentioned below so as to provide a reference to the candidates.

    Semester ISemester II
    Advanced ThermodynamicsAdvanced Power Plant Engineering
    Internal Combustion EnginesRefrigeration and Air Conditioning System design
    Heat TransferThermal Modeling Analysis
    Computer Programming and Data StructureComputation Methods in CAD
    Statistical method and algorithmsElective 1
    PracticalPractical
    Semester IIISemester IV
    Computational Fluid DynamicsBoundary Layer Theory
    Elective 2Fuels and Combustion
    SeminarElective 4
    ThesisThesis
    Elective 3Gas Turbines and Compressors
    PracticalPractical

    M.E. Thermal Engineering: Who Should Opt for?

    • Students who have a background in Mechanical engineering/Automobile engineering/Production engineering/Mechanotronics/Aeronautical/Production engineering at graduation level.
    • Those who have a career as a safety engineer in Mind.
    • Those who are aiming at public sector jobs.
    • Those aiming at higher studies in the domain can opt for the course.

    M.E. Thermal Engineering: Career Prospects

    Thermal Engineering postgraduates have plenty of options to choose from in terms of their career. One can choose to work with companies such as Steel India, Power Grid of India, NTPC, Discoms, Renewable Energy producers etc.

    To provide you a complete view of the career prospects of the course we have tabled certain areas and the respective roles attached to the same where Thermal engineering postgraduates can look for in terms of their career.

    Master of Engineering [ME] (Thermal Engineering
    Job ProfileRoleAverage Salary for Fresher’s
    Safety EngineerSafety engineers are entrusted with the responsibility of maintaining the optimum temperature range for equipment so as to avoid any burnout or damage.INR 2.75-3.32 Lacs
    Design EngineerThe job of a design engineer involves analysis and structurization of equipment or project so as to assess its thermal standing capability.INR 2.96-3.65 Lacs
    Quality ManagerThe job involves one to ensure that standards of quality and manufacturing are not compromised in the production of thermal equipment and machinery.INR 2.85 -3.43 Lacs
    Project EngineerA project engineer is involved in management, coordination, and completion of a said project which is being entrusted to him.INR 2.75-3.24 Lacs
    Assistant engineerAn assistant engineer’s job involves regulation of the temperature range of various production equipment in sync with the advice tendered by senior engineer.INR 2.82-3.2 Lacs

    Master of Engineering [ME] (Thermal Engineering) Fee Structure in India


    17.01 K (Minimum Fee)PUBLIC COLLEGES1.9 L (Maximum Fee)
    80.65 K (Average Fee)
    50 K (Minimum Fee)PRIVATE COLLEGES8.04 L (Maximum Fee)
    1.52 L (Average Fee)

    Master of Engineering [ME] (Thermal Engineering) Fee Structure by State


    Tamil Nadu

    18.61 KPUBLIC COLLEGES1.9 L
    98.57 K
    50 KPRIVATE COLLEGES2 L
    1.1 L

    Gujarat

    17.01 KPUBLIC COLLEGES18.6 K
    17.81 K
    1.22 LPRIVATE COLLEGES2.5 L
    2 L

    Madhya Pradesh

    1.01 LPUBLIC COLLEGES1.01 L
    1.01 L
    1 LPRIVATE COLLEGES1.32 L
    1.18 L

    Comments

    Comments



    No Comments To Show

    ×