










This is a close decision, so look at the branch and your goals. IIT Patna is a newer IIT with a growing research profile, while Jadavpur University is an established name. More is known about IIT Patna than about Jadavpur here, so compare Jadavpur's placement record for mechanical on your own before you decide.
On the IIT Patna side, an alumnus said its mechanical faculty is among the best in the institute, and that student teams take part in design competitions such as BAJA and Supra with good results. Students also note that for tech-related placements, branches such as mechanical, chemical and civil are usually treated alike, since companies that are open to all branches accept all three, though one student's rough guess was that only about half of companies are open to all. For chemical, the PSU route (oil and gas companies) is often mentioned as a realistic government job path.
If you want the IIT brand and a path through GATE or PSUs, chemical at IIT Patna is a fair option. If you prefer mechanical as a field and an established university, Jadavpur is worth a serious look. Interest in the subject matters here, because core roles are fewer than software roles. Ask seniors from both about internships, recent offers and higher studies before you finalise.

For electrical and mechanical across these five campuses, students say the differences are smaller than the online ranking posts suggest, so a few practical filters work better than a single order:
On specific colleges, one student said that IIT Dhanbad is better from a placement perspective, while another felt that Jodhpur's campus infrastructure is better than Mandi's, though Mandi has the scenery. Another view is that if you can get electrical at a newer IIT, you could probably get some branch at an older IIT, and that is worth looking into.
My advice is to pull up the last two or three placement reports for your branch at each college, and compare the number of students placed and the median package, and not just the highest offer. Speak to seniors in the same branch, because online opinions are often biased. If everything is close, choose the campus that is easier to get to and where you feel more comfortable.
For most students the older IIT mechanical seat looks safer on paper, but CSE at a second-generation IIT is a genuine option if you are serious about programming. Students point out that computer science needs very little physical infrastructure, so you can get almost the same education at a 2008-batch IIT as at an older one.
The caveat is people. Second-generation IITs were not the first choice of many students and faculty, and that can affect the quality of CSE teaching compared to older campuses. Students who have been through it say that if you stay in roughly the top tenth of your class, you can compete with the best from older IITs, and that online courses can fill any gaps.
On the mechanical side, students say a branch at a first-generation IIT such as Kharagpur is better because of the atmosphere, the experience of professors and the opportunities that come with an older alumni network. But mechanical is a core branch, and core placements are generally slower than software roles.
If you want a career in software and will study on your own, take CSE at the newer IIT. If you want a core career, higher studies or a stronger brand across industries, an older IIT mechanical seat is the safer pick.

What I can pass on comes from a junior-year student at IIT Patna, so it covers one side of the comparison, and I do not have comparable first-hand feedback about Dhanbad. The student says that daily life at IIT Patna is perfectly decent:
Another IIT Patna student adds a useful piece of advice. Drop any pre-conceived notion about Patna or Bihar, because the institute gives you the facilities you would expect as an IIT student. That matters because many applicants judge the place by its location rather than the campus itself. The same student rates the electrical programme highly and notes that the branch is tough everywhere, which should not worry anyone who cleared the JEE Advanced.
'Better life' means different things to different people, so list what matters to you: hostel rooms, mess food, campus size, nearby city life, culture and friends. Then compare the two campuses against that list by speaking to current students at both and, if possible, visiting. Pay attention to the branch you will get, since the academic workload and peer group in your department will shape your daily life more than the location.

There is no single winner, and students who have compared these three for CSE give different answers depending on what they value. One view that comes up often is that IIT Mandi suits you if you want a pleasant campus and a reasonable package for a newer IIT, while IIT Patna suits you if your main aim is a higher package and heavy involvement in tech.
Choose the one whose environment you can live with for four years, since the CSE curriculum is broadly similar across IITs. Then compare the latest official placement figures for CSE at each, and talk to seniors in the branch before you lock your choice.

Student opinion on this one is split, so look at the details rather than the name.
There is also a note of caution. One student says that Patna's placement figures should be checked carefully, hinting that the numbers may not tell the whole story, and others point out that those figures vary from one year to the next. Treat such claims as opinions, but they are a good reason to verify.
So compare the official branch-wise placement reports for CSE at both for the last two or three years, looking at median packages, the share of students placed and the types of recruiters. Then compare the campus conditions, hostels and faculty. If you have an offer from both, many students would choose Dhanbad for its long-standing reputation and alumni network, while Patna is worth a close look if recent placement results match what you want. Speak to seniors in CSE at both before deciding.

Both offer a solid mechanical programme, and the better one for you depends on faculty, labs and recent placements for the branch. IIT (ISM) Dhanbad has a much longer history and became an IIT later, while IIT Patna is a second-generation IIT that has grown quickly. The legacy often helps Dhanbad with alumni and core-sector connections, though that is a general advantage, not a rule.
Student reports about campus life at Patna are mixed. A junior at IIT Patna says hostels are decent, with Wi-Fi on every floor, while a student in another department said food outlets are limited and that some faculty are not cooperative. Others note that Patna has a strong coding culture. Another comment suggested that colleges in the UP and Bihar region have done well in recent placements, but check that for yourself.
I would suggest comparing mechanical departments directly.
If both are open to you, the one where seniors give you specific, consistent feedback is usually the safer choice. Consider the city and campus life as well, because you will spend four years there.

Reliable, detailed information on sports at these two IITs is thin, so the best advice is to ask current students directly about the grounds, coaching and inter-IIT participation before you decide. What students do say is that newer IITs in this group are close to each other in most respects, so the differences are smaller than they appear on online comparisons.
On coding culture, students who rank the newer IITs on academics and internships tend to place IIT Hyderabad and IIT Indore at the top, with IIT Ropar, Gandhinagar and Patna in the middle and IIT Bhubaneswar toward the lower end. The same students add that the gap among the middle group is small and mostly a matter of personal preference. IIT Patna is described as having an active competitive programming group, and such a culture can help students from other branches too, if they are motivated to join clubs and contests.
For college life, students have ranked these campuses differently, with Dhanbad and Ropar generally ahead of Patna, but opinions vary and depend on what each person values.
A useful way to decide: contact the coding and sports clubs at both IITs, ask how many students take part, and see how active they are. A strong culture is one where students of all branches join in.
Most students would frame this as brand and campus versus branch. IIT Bombay has the stronger brand, larger alumni network and older ecosystem. Computer science, meanwhile, is a high-demand branch, and even at newer IITs it is described as giving good placement outcomes. Civil at IIT Bombay will not give you the same software hiring pipeline, but it opens paths in infrastructure, construction, consulting and higher studies.
Students who face a similar dilemma say that if you cannot get CSE or ECE, the old IITs are the safer pick, and you can prepare for software alongside your core branch. Some friends of theirs from core branches did this and landed good placements, because companies look at the tag early in your career. Others warn that picking a branch that is far from your real interest can be tough.
Ask yourself whether you want to work in software.
Speak to seniors from both departments and compare the latest placement outcomes before making the call.
There is no clear-cut winner, and students on forums disagree. Some students place BITS Pilani ahead of IIT Patna on recent placement trends. Others argue that the IIT tag has limited value once you are inside the tech industry, and that opportunities and skills matter more. So the right choice for you depends on what you plan to do after your BTech.
On internships, remember that in either college your chances depend mostly on your skills and projects, not on the college handing you an internship. BITS Pilani has its practice school system, which places students in companies for semesters, while at IIT Patna you will need to be more proactive in finding and preparing for opportunities. Both approaches work if you put in the effort.
For MS admissions, universities abroad mainly look at your CGPA, research work, recommendations and test scores, and the brand of an IIT can help in some cases. Students who are keen on research or on higher studies in India may find the IIT label useful, particularly for MTech and PhD programmes.
Ask seniors at both campuses what their batch's internship and placement outcomes look like for CSE, and compare the most recent official reports. If the budget allows both, think about whether you prefer a flexible private-university environment or a government IIT with lower fees.
Comments