What is the Anna University B.E. admission process for 2026?

B.E. admission to Anna University constituent colleges (CEG, MIT, ACT, SAP) is through TNEA 2026. No entrance exam is required. Candidates are ranked by Class 12 PCM marks cutoff. Round 1 choice filling starts July 20, 2026 at tneaonline.org.

When does the TNEA 2026 choice filling start for Anna University?

TNEA Round 1 choice filling opens July 20, 2026 at tneaonline.org. Round 1 allotment is expected on July 24, 2026. Candidates should keep all required documents ready for online verification before filling preferences.

What is the minimum cutoff for B.E. at Anna University CEG campus?

CEG Guindy is among the highest-demand engineering colleges in TNEA. Computer Science and Engineering at CEG typically requires a cutoff above 195.5/200 for the Open category. Electrical, Electronics, and Mechanical engineering branches have cutoffs in the 190 to 195 range. Exact cutoffs vary by round and category each year.

How is M.E. admission done at Anna University 2026?

M.E./M.Tech admission is through CEAP-2026, managed by the Centre for Admissions (CFA) at cfa.annauniv.edu. GATE-qualified candidates and CEETA-PG qualifiers apply separately. GATE category allotment was completed in June 2026. CEETA-PG allotment and joining concluded by July 7, 2026. Check tancet.annauniv.edu for stray vacancy rounds.

Is GATE mandatory for M.E. admission at Anna University?

GATE is not mandatory but is the primary pathway for the GATE category in CEAP-2026. Candidates without GATE scores can apply through the CEETA-PG category by appearing in CEETA-PG 2026, conducted by Anna University. GATE candidates get a separate and earlier round of choice filling.

What is the TANCET MBA counselling schedule at Anna University for 2026?

TANCET 2026 MBA rank list is expected on July 15, 2026. MBA choice filling Round 1 is scheduled from July 30 to August 2, 2026. Round 1 seat allotment is expected by August 10, 2026. All TANCET counselling is at tancet.annauniv.edu.

Is there any entrance exam for Anna University B.E. 2026?

No. TNEA 2026 is entirely marks-based. Anna University B.E. admission uses Class 12 marks in Physics, Chemistry, and Mathematics. The TNEA cutoff is calculated as (Physics marks / 2) plus (Chemistry marks / 2) plus Mathematics marks, giving a maximum of 200.

Does Anna University have a management quota for engineering?

No. Anna University and its constituent colleges (CEG, MIT, ACT, SAP) are government institutions. All B.E. seats are filled through TNEA counselling. There is no management quota or NRI quota at the constituent campuses.

What are the application fees for TNEA 2026?

TNEA 2026 application fee is INR 500 for General candidates, INR 250 for SC/ST candidates, and INR 100 for Special Reservation candidates. TNEA counselling fee is INR 5,000 (General) and INR 1,000 (SC/ST/SCA). Fee is paid at tneaonline.org.

What scholarships are available for Anna University students?

SC/ST students from Tamil Nadu get full tuition fee waiver at Anna University constituent colleges. BC/MBC/DNC students can apply for Tamil Nadu Post-Matric Scholarship. All eligible students can apply for the Central Sector Scholarship (INR 10,000 to INR 20,000 per year) through the National Scholarship Portal. GATE-qualified M.E. students receive INR 12,400 per month from AICTE.

Anna University Chennai ME Welding Technology: Fees 2026, Course Duration, Dates, Eligibility

Collegedunia Team

Content Curator | Updated 3+ months ago

The Master of Engineering (ME) in Welding Technology is a 2-year full-time postgraduate degree program offered on campus at Anna University, Chennai. This specialized program focuses on advanced welding processes, metallurgy, and the design and fabrication of welded structures used in various industries. The total fees for the program is 96,660 rupees. The program accepts 18 students per batch and is highly sought after due to the critical demand for skilled welding engineers in manufacturing, aerospace, automotive, and construction industries. The primary entrance exam required is TANCET (Tamil Nadu Common Entrance Test), making it accessible to candidates across Tamil Nadu and other states.

Admission Status and Important Dates

The admission process for the 2026-27 academic year is currently ongoing. CEETA-PG registration is open from March 16, 2026 to April 10, 2026, with the exam scheduled for May 10, 2026. The result is expected on June 28, 2026 (tentative), followed by counselling on July 28, 2026 (tentative). Alternatively, candidates can appear for TANCET with registration from March 16, 2026 to April 10, 2026 and exam on May 9, 2026, with results on June 24, 2026 (tentative). Candidates should note that both exams are accepted for admission to this program.

Key Points

Specialization in welding technology and metallurgy, essential for structural fabrication and manufacturing
Comprehensive curriculum covering arc welding, gas welding, resistance welding, and advanced welding processes
Strong industry relevance with placement opportunities in automotive, aerospace, shipbuilding, and heavy manufacturing sectors
Access to advanced welding laboratories with modern equipment and simulation facilities
Opportunity to work on real-world industrial projects and research in welding science

88 Views Last Year

5 Studentsshown interest in the last 30 days

Official Link:

Go To Website

Highlights
Fees
Admission
Scholarships
Placements
FAQs

AU ME (Welding Technology) Fees

The total fees for the ME Welding Technology program at Anna University is 96,660 rupees for the entire 2-year duration. This includes tuition fees, caution fees, and other academic charges. Students are required to pay 36,060 rupees in the first year. The fee structure is designed to be affordable while maintaining high academic standards. Additionally, hostel facilities are available at an additional cost of 1,57,000 rupees for the entire duration (optional, not mandatory).

Fee Components

Fee Component	Amount (INR)
Tuition Fee	40,000
Caution Fee	5,000
Other Fees	51,660
Total Academic Fees	96,660
Hostel Fee (Optional)	1,57,000

Caution fee is refundable.
Hostel fees are optional and charged separately.
No additional charges for laboratory or practical sessions are included in the tuition fee.
Payment can be made in installments as per university guidelines.

AU ME (Welding Technology) Admission 2026

Important Dates

Event	Date
CEETA-PG Registration Opens	March 16, 2026
CEETA-PG Registration Closes	April 10, 2026
CEETA-PG Exam Date	May 10, 2026
TANCET Registration Opens	March 16, 2026
TANCET Registration Closes	April 10, 2026
TANCET Exam Date	May 9, 2026
TANCET Result Date	June 24, 2026 (Tentative)
CEETA-PG Result Date	June 28, 2026 (Tentative)
Counselling Date	July 28, 2026 (Tentative)
Expected Batch Start Date	August 2026

The dates mentioned above are tentative and subject to change.

Eligibility Criteria

Bachelor's degree in relevant engineering discipline (Mechanical Engineering, Production Engineering, Manufacturing Engineering, or related fields) with minimum 50 percent marks
Valid TANCET or CEETA-PG score (qualifying exam score is mandatory)
Candidates from reserved categories (SC/ST/OBC) require 45 percent marks in their bachelor's degree

Admission Process

Register and appear for TANCET or CEETA-PG entrance examination
Qualify the entrance exam with a valid score
Register for counselling on the official Anna University admissions portal
Participate in merit-based seat allocation through online counselling
Complete document verification and fee payment to confirm admission
Report to the college for registration and commencement of classes

AU ME (Welding Technology) Scholarships 2026

Anna University offers various scholarships to support meritorious and economically disadvantaged students. Merit-based scholarships are awarded to students with excellent academic records. Reserved category scholarships are available for SC/ST/OBC students as per government norms. Additionally, the university provides financial assistance through need-based scholarships for students from economically weaker sections. External scholarships from government agencies and private organizations are also available.

Scholarship Details

Scholarship Type	Eligibility	Amount	Application Deadline
Merit Scholarship	Top 10 percent students in entrance exam	Up to 50 percent fee waiver	June 30, 2026
SC/ST Scholarship	SC/ST category students	Up to 100 percent fee waiver	June 30, 2026
OBC Scholarship	OBC category students	Up to 75 percent fee waiver	June 30, 2026
Need-Based Scholarship	Annual family income below 8 lakhs	Up to 100 percent fee waiver	June 30, 2026
EWS Scholarship	Economically Weaker Section	Up to 100 percent fee waiver	June 30, 2026

Scholarship amounts are subject to university policies and may vary.
Students must maintain a minimum CGPA of 6.5 to retain merit-based scholarships.
Application forms are available on the university portal.
Scholarships are awarded on a first-come-first-served basis for need-based categories.

AU ME (Welding Technology) Placement 2024

Anna University has a strong placement record for ME programs, with approximately 49 percent of ME students placed during the 2024 placement drive. The median package offered to ME graduates is 7.5 lakhs per annum, with the highest package reaching 40 lakhs. The university has tie-ups with leading manufacturing companies, automotive firms, aerospace organizations, and shipbuilding industries. Companies like Larsen and Toubro, Bharat Heavy Electricals Limited, and other major industrial firms actively recruit from the program. The placement cell provides training in technical skills, soft skills, and interview preparation to enhance employability.

Placement Statistics

Placement Metric	2024 Data
Total Students Admitted	538 (ME Program)
Students Placed	324
Placement Percentage	60 percent
Median Package	7.5 Lakhs
Highest Package	40 Lakhs
Average Package	8.54 Lakhs

AU ME (Welding Technology) FAQs

Ques. What is the difference between ME Welding Technology and ME Manufacturing Engineering?

Ans. ME Welding Technology specializes specifically in welding processes, metallurgy, and the design of welded structures. ME Manufacturing Engineering covers broader manufacturing processes including machining, casting, and forming. While both programs have some overlap, Welding Technology provides deeper expertise in welding science, joint design, and welding metallurgy, making it ideal for those focused on welding and fabrication industries.

Ques. What are the career opportunities after completing ME Welding Technology?

Ans. Graduates can pursue careers as welding engineers, quality assurance engineers, process engineers, and design engineers in automotive, aerospace, shipbuilding, oil and gas, construction, and heavy manufacturing industries. Roles include designing welded structures, optimizing welding processes, ensuring quality control, and managing fabrication projects. The field offers excellent growth prospects due to increasing demand for skilled welding professionals globally.

Ques. Is work experience required for ME Welding Technology admission?

Ans. No, work experience is not mandatory for admission to the ME program. However, candidates with relevant work experience in manufacturing or welding may have an advantage during counselling in some cases. The primary requirement is a valid bachelor's degree in a relevant engineering discipline and a qualifying entrance exam score.

Ques. Can I pursue this course through distance education or part-time mode?

Ans. No, the ME Welding Technology program at Anna University is offered only in full-time, on-campus mode. Students are required to attend regular classes and participate in laboratory sessions. This ensures comprehensive learning and hands-on experience with welding equipment and metallurgical testing facilities.

Ques. What is the hostel facility situation for ME students?

Ans. Hostel facilities are available at Anna University for both male and female students at an additional cost of approximately 1,57,000 rupees for the entire 2-year duration. Hostel accommodation is optional and not mandatory. Students can apply for hostel facilities during the admission process or after joining the program based on availability.

Ques. How is the curriculum structured across the four semesters?

Ans. The curriculum is divided into four semesters with a mix of core courses, electives, and project work. Semesters 1 and 2 focus on foundational courses in welding processes, metallurgy, and weldment design. Semesters 3 and 4 include advanced electives in advanced welding processes, welding codes and standards, and testing and inspection of weldments. Students complete a comprehensive project in the final semester, which is evaluated by internal and external examiners.

Course Finder

Search from 20K+ Courses and 35+ Streams

Anna University Chennai: 2 Answered Questions

What is the scope of an M.Sc computer science 5-year integrated course offered by Anna University?

Jayant ThakurStudied at Anna University, Tamil Nadu, India

The master's program is accelerated and lasts five years. The demand for mathematically trained software professionals is increasing as the software industry undergoes dynamic changes.

To meet this demand, the Department of Mathematics has launched two new MSc programs: the 5-Year Integrated MSc. (Computer Science) and the 5-Year Integrated MSc. (Mathematics) (Information Technology). These innovative programs include software industries in the development of curriculum and syllabi, as well as resources from various MNCs for specialized courses and student training for their projects. Every year, 97% of students are placed in well-known/multinational corporations.

How is the material science program at Anna University?

Vishal BaglaPost Graduate Diploma in in Business Analytics, Indian Institute of Management Calcutta (Graduated 2019)

Material Sciences in CEG started 9 years before and in such a short span it has gained recognition. It has made a significant contribution to the research of the country. The significance of the program has been described on the basis of the following aspects.

Research: Research is the most impressive feature of this course. The funding provided by the Center for Technology Development and Transfer during the third year is extremely helpful and encourages students to take up research.

Faculty: Although the faculty is extremely supportive, some of them lack specialization in materials science.

Course: The course has a variety of options for electives. It is extremely structured and moderate-paced.

Infrastructure: This is where the course lacks the most. It does not have a separate department and operates under the department of Mechanical Engineering. Also, there is a lack of equipment required for the course.

Alumni: The number of alumni is less as the course has recently started. But most of them are now working at extremely good universities around the world and India or are placed in very good companies (both in core materials science and IT).

Internships: CEG renders excellent exposure. A vast amount of undergrads perform research in various laboratories across the world during their second and third years. This helps in securing jobs in the future.