The expected ATMA July 2026 cutoff for BIMTECH Greater Noida is 75–80 percentile for PGDM General Management, which translates to approximately 95–115 marks out of 180 based on previous year trends.
BIMTECH (Birla Institute of Management Technology), Greater Noida is a well-ranked B-school that accepts ATMA scores for its PGDM programs. The ATMA July 2026 exam is scheduled for July 12, 2026. BIMTECH shortlists students for Group Discussion (GD), Written Ability Test (WAT), and Personal Interview (PI) rounds based on ATMA percentile. The cutoff varies by program, with PGDM General Management being the most competitive entry point.
- ATMA July 2026 exam date: July 12, 2026
- Expected BIMTECH PGDM (General Management) cutoff: 75–80 percentile (approx. 95–115 marks out of 180)
- Expected BIMTECH PGDM (International Business) cutoff: 70–75 percentile (approx. 88–105 marks)
- Expected BIMTECH PGDM (Insurance/Retail Management) cutoff: 65–70 percentile (approx. 80–95 marks)
- BIMTECH selection process: ATMA percentile + GD + WAT + PI + academic record + work experience
- All figures are expected and based on 2025 admission cycle trends — not officially confirmed
| Direct Link to ATMA July 2026 Registration and Official Results — atmaaims.com |
ATMA July 2026 Expected Cutoff for BIMTECH Greater Noida
Based on ATMA 2025 admission data and BIMTECH’s historical shortlisting patterns, the table below shows the expected cutoff for ATMA July 2026 across all PGDM programs at BIMTECH Greater Noida. All figures are expected and based on previous year trends — they are not officially confirmed by BIMTECH or AIMS.
| PGDM Program | Expected ATMA Percentile (2026) | Approx. Score Range (out of 180) |
|---|---|---|
| PGDM (General Management) | 75–80 percentile | 95–115 |
| PGDM (International Business) | 70–75 percentile | 88–105 |
| PGDM (Insurance Business Management) | 65–70 percentile | 80–95 |
| PGDM (Retail Management) | 65–70 percentile | 80–95 |
The ATMA exam carries a maximum score of 180 (180 questions, 1 mark each, with negative marking of 0.25 per wrong answer). A raw score above 100 out of 180 corresponds roughly to the 75th percentile in a competitive ATMA sitting. Students targeting BIMTECH PGDM General Management should aim for at least 95 marks or the 75th percentile for a reliable shortlisting chance in the July 2026 sitting.
Previous Year ATMA Cutoff for BIMTECH Greater Noida
BIMTECH Greater Noida has maintained a relatively stable cutoff band across ATMA sittings over successive admission cycles. The figures below reflect approximate cutoff percentiles from the 2025 admission cycle across February, May, and July sittings.
| PGDM Program | ATMA 2025 Cutoff Percentile | Score Range (out of 180) |
|---|---|---|
| PGDM (General Management) | 72–78 percentile | 90–112 |
| PGDM (International Business) | 68–73 percentile | 85–100 |
| PGDM (Insurance Business Management) | 62–68 percentile | 78–92 |
| PGDM (Retail Management) | 62–68 percentile | 78–92 |
BIMTECH Greater Noida accepted ATMA scores from all three sittings (February, May, and July) during the 2025 cycle. The July sitting cutoff tends to be marginally higher than earlier sittings because fewer seats remain available at that stage. Students appearing in ATMA July 2026 should apply to BIMTECH immediately after results are declared to secure a shortlisting window.
Profile-wise Cutoff Analysis for BIMTECH Greater Noida
BIMTECH Greater Noida is a private autonomous institute and does not follow government reservation categories (SC/ST/OBC) for PGDM admission. Instead, BIMTECH evaluates student profiles holistically. The table below reflects expected cutoff considerations based on student profile type.
| Student Profile | Expected ATMA Percentile (2026) | Notes |
|---|---|---|
| Fresh graduate (no work experience) | 75–80 percentile | Standard cutoff; academic record matters most |
| Working professional (2+ years) | 70–75 percentile | Work experience adds PI weightage; slight relaxation possible |
| Female students (General Management) | 72–78 percentile | Diversity consideration may apply at PI stage |
| Industry-specific programs (Insurance/Retail) | 65–70 percentile | Lower cutoff; domain background valued in PI |
Students with a strong undergraduate academic record (above 70% or 7.0 CGPA) or relevant sectoral work experience may receive shortlisting consideration even near the lower end of the expected cutoff range. BIMTECH weighs the full profile — not just the entrance score — when building its shortlist.
Factors Affecting ATMA Cutoff for BIMTECH Greater Noida 2026
The ATMA July 2026 cutoff for BIMTECH Greater Noida may shift upward or downward from previous year figures depending on the following factors:
- Total number of applicants: Higher ATMA July 2026 registrations mean greater competition, which can push the effective shortlisting percentile upward.
- Exam difficulty: A tougher July 2026 paper changes the percentile-to-score conversion — a lower raw score may still meet the percentile cutoff if scores across all test-takers drop.
- Seat availability in July: BIMTECH distributes seats across all ATMA sittings; fewer remaining seats in July typically tighten the cutoff compared to the February sitting.
- Program-wise intake: PGDM General Management has the largest intake (approximately 120 seats), which keeps its cutoff relatively more accessible than niche programs with smaller batch sizes.
- Competing B-schools: If other ATMA-accepting institutes raise their cutoffs in 2026, demand for BIMTECH seats may increase, pushing the effective cutoff higher.
The ATMA July 2026 result is expected within 1–2 weeks of the July 12, 2026 exam. BIMTECH typically releases its shortlist within 2–3 weeks of the result announcement, so students should monitor the official AIMS portal regularly after the exam.
BIMTECH Greater Noida Selection Process After ATMA Shortlisting
Meeting the ATMA July 2026 cutoff is only the first step at BIMTECH Greater Noida. Shortlisted students go through a multi-stage selection process before a final admission offer is made.
| Stage | Selection Component | Approximate Weightage |
|---|---|---|
| Stage 1 | ATMA Score and Percentile | 35–40% |
| Stage 2 | Group Discussion (GD) | 15–20% |
| Stage 2 | Written Ability Test (WAT) | 10–15% |
| Stage 3 | Personal Interview (PI) | 25–30% |
| Supporting | Academic Record and Work Experience | 10–15% |
The GD and WAT assess communication skills and contemporary business awareness. The PI evaluates motivation, career goals, and domain-specific knowledge. Students with ATMA scores near the lower end of the cutoff range can strengthen their overall profile through strong GD and PI performance. BIMTECH does not conduct a separate written entrance test beyond WAT at the time of selection.
ATMA July 2026 Cutoff for BIMTECH Greater Noida FAQs
Ques. What is the expected ATMA July 2026 cutoff percentile for BIMTECH Greater Noida?
Ans. The expected ATMA July 2026 cutoff for BIMTECH Greater Noida is 75–80 percentile for PGDM General Management and 65–70 percentile for niche programs such as Insurance Business Management and Retail Management. These are expected figures based on 2025 admission cycle trends and are not officially confirmed.
Ques. What is the minimum ATMA score out of 180 required for BIMTECH Greater Noida?
Ans. Based on previous year trends, a minimum raw score of approximately 80–95 out of 180 is expected for niche PGDM programs at BIMTECH, while PGDM General Management may require 95–115 marks. Scores are always evaluated alongside the corresponding percentile, which depends on overall test-taker performance.
Ques. Does BIMTECH Greater Noida accept ATMA July 2026 scores?
Ans. Yes, BIMTECH Greater Noida accepts ATMA scores from all sittings including February, May, and July. Students appearing in the ATMA July 2026 exam on July 12, 2026 can apply to BIMTECH Greater Noida using their July sitting scores.
Ques. What is the selection process at BIMTECH Greater Noida after ATMA shortlisting?
Ans. After shortlisting based on ATMA percentile, BIMTECH conducts Group Discussion (GD), Written Ability Test (WAT), and Personal Interview (PI). The final merit list is prepared by combining ATMA score, GD/WAT/PI performance, academic record, and work experience.
Ques. Is work experience mandatory for BIMTECH PGDM admission through ATMA?
Ans. Work experience is not mandatory for BIMTECH PGDM admission. However, students with relevant work experience receive additional weightage during the Personal Interview stage, which can meaningfully improve their overall selection score.
Ques. When will BIMTECH Greater Noida release the ATMA July 2026 shortlist?
Ans. BIMTECH typically releases its shortlist 2–3 weeks after the ATMA result is declared. Since the ATMA July 2026 exam is on July 12, 2026, results are expected by late July 2026 and BIMTECH’s shortlist may follow in August 2026. Students should check the official AIMS portal at atmaaims.com for result updates.
Comments