Four cells of emf 'E' are joined in parallel to form a battery. The equivalent emf of battery will be

Collegedunia Team logo

Collegedunia Team

Content Curator

When four cells of EMF 'E' are connected in parallel, the total EMF of the battery will still be 'E'. This is because when cells are connected in parallel, the positive terminals are connected to each other and the negative terminals are also connected to each other.

The potential difference between the positive and negative terminals of each individual cell is 'E'. When they are connected in parallel, the potential difference between the positive and negative terminals of the entire battery is still 'E'.

Therefore, the equivalent EMF of the battery will be 'E'. However, the internal resistance of the battery will be lower when cells are connected in parallel, which will result in a higher current output.

Also check:

CBSE CLASS XII Related Questions

  • 1.
    In a region, the electric potential varies as \(V = 10 - 50x\), where \(V\) is in volts and \(x\) is in meters. The electric field in the region is

      • \(10\ \text{N/C}\) along \(+x\)
      • \(10\ \text{N/C}\) along \(-x\)
      • \(50\ \text{N/C}\) along \(+x\)
      • \(50\ \text{N/C}\) along \(-x\)

    • 2.
      Two point charges -Q and Q are located at points (d, 0) and (0, d) respectively, in x-y plane. The electric field E at the origin will be:

        • \(\frac{1}{4\pi\epsilon_0} \frac{\sqrt{2}Q}{d^2} (\hat{i} - \hat{j})\)
        • \(\frac{1}{4\pi\epsilon_0} \frac{\sqrt{2}Q}{d^2} (-\hat{i} - \hat{j})\)
        • \(\frac{1}{4\pi\epsilon_0} \frac{Q}{d^2} (\hat{i} - \hat{j})\)
        • \(\frac{1}{4\pi\epsilon_0} \frac{Q}{d^2} (-\hat{i} - \hat{j})\)

      • 3.

        The number of free electrons per unit volume ($\text{m}^3$) in a wire made of copper (resistivity $1.72 \times 10^{-8}\,\Omega\,\text{m}$) is $8.5 \times 10^{28}$. Calculate the average number of collisions made by an electron in one second when an electric field is maintained in the wire.


          • 4.

            A parallel beam of monochromatic light falls normally on a single slit of width $a$ and a diffraction pattern is observed on a screen placed at distance $D$ from the slit. Explain:

            (I) the formation of maxima and minima in the diffraction pattern, and

            (II) why the maxima go on becoming weaker and weaker with its increasing number $n$.


              • 5.

                A square loop of side 0.50 m is placed in a uniform magnetic field of 0.4 T perpendicular to the plane of the loop. The loop is rotated through an angle of $60^\circ$ in 0.2 s. The value of emf induced in the loop will be:

                  • 5 V
                  • 3.5 V
                  • 2.5 V
                  • Zero V

                • 6.

                  A ray of light MN is incident normally on the face corresponding with side AB of a prism with an isosceles right-angled triangular base ABC. Trace the path of the ray as it passes through the prism when the refractive index of the prism material is (i) $\sqrt{2}$, and (ii) $\sqrt{3}$.

                    CBSE CLASS XII Previous Year Papers

                    Comments


                    No Comments To Show