filter your searchallcollegesexamnews

Bachelor of Engineering [BE] (Instrumentation & Control Engineering) - Course Overview

  • STREAM

    ENGINEERING

  • DURATION

    4 YEARS

  • COURSE

    Instrumentation

  • COURSE TYPE

    Graduation

Updated On - January 5th 2019 By SAKSHI GUPTA

Bachelor of Engineering [BE] (Instrumentation & Control Engineering) Top Colleges, Syllabus, Scope, and Salary

B.E. Instrumentation and Control Engineering is a 4-year undergraduate course with a specialization in the field of instrumentation, control, design, and operation of various machines and automated equipment that are used in industries. The minimum eligibility criterion which most of the institutes ask for is a score of at least 65% (relaxable for reserved category candidates) at 10+2 or equivalent level.

Some of the popular colleges offering the course are:

The fee for the course varies between INR 65,000 to INR 4, 75,000 in India. The variation in fee is based on the location and nature of university (that is government, state/private/deemed etc.).

Admissions to the course are done through a Common Entrance Test (CET) based method as well as merit-based selection criteria that is the percentage of marks obtained at 10+2 or equivalent level by the candidate. Most of the colleges who provide admissions through CET mechanism rely on the score of All India Level (AIL) common entrance exams like JEE Main, JEE Advanced, UPSEEetc. while some of them go for a separate entrance exam of their own (like BITSAT).

The course provides skills and knowledge in the domain of instrumentation and control engineering to the UG students so as to equip them holistically in the subject that will enable them to persecute the learning in a practical sense

Instrumentation and Control engineering graduates have a wide range of opportunities to choose from in terms of job opportunities such as Design trainee engineer, Testing Engineer, Instrumentation site engineer, Technician etc. After completion of graduation, one may opt to pursue further studies like M.E. and M.Phil in the said subject or may take up job opportunities associated. The average salary ranges between INR10,000 to 15,000 a month for a fresher in the job market.

B.E. Instrumentation and Control Engineering: Course Highlights

Course LevelUnder Graduate
Duration of the Course4 years
Examination TypeSemester-Wise
EligibilityMinimum score of 65% (Relaxable for reserved category students) marks at 10+2 or equivalent level.
Admission ProcessEntrance exam based/Merit-based
Course FeeBetween INR 65,000 to INR 4.75 Lacs
Average Starting SalaryRs.10000 to 15000
Top Recruiting CompaniesONGC, BSNL, Philips, OPPO, Reliance India Ltd.
Job PositionsDesign trainee engineer, Testing Engineer, Instrumentation site engineer, Technician

B.E. Instrumentation and Control Engineering: What is it about?

Instrumentation and Control Engineering is a specialized domain under the ambit of electrical and electronics engineering. It takes it’s aspects from the domain of electrical engineering as well electronics to focus on the core objective of design and configuration of automated systems.

Today automated instruments have used in a wide variety of applications at industry level which includes packaging, fitting, flaw detection, standardization etc. To keep these systems strong and running trained professionals are required. With the advent of automation and embedded system, the need for such professionals is only going to increase in the future.

B.E. Instrumentation and Control Engineering course aim at delivering those qualified professionals to the industry by equipping the UG students with technical skills and knowledge in the domain.

B.E. Instrumentation and Control Engineering: Top Institutes 

B.E. Instrumentation and Control Engineering is offered as a course by a good number of colleges across the country to candidates who have passed their 10+2 or equivalent level examination from a recognized state or central board.

Students can take admission in the course through Common Entrance Test conducted by certain exam conducting authorities such as IITs, UPSEE, NIT as well as separate exams conducted by respective Colleges/Universities (such as LUPNEST) that are offering this course.

For your reference, we have tabled down a list of various colleges/universities that are offering this course in India.

InstituteCityAverage Fee (Per annum basis)
Anna UniversityChennaiINR 30,095
AVC College of EngineeringNagapattinamINR 40,000
Bansal College of EngineeringBhopalINR 55,000
Cummins College of Engineering for WomenPuneINR 90,095
IITKanpurINR 1,44,000
National Institute of TechnologyJamshedpurINR 85,250
Lovely Professional UniversityJalandharINR 1, 30,000
Dharmsinh Desai UniversityNadiadINR 60,171
AMACETiruvannamalaiINR 45, 734
College of Engineering and ManagementKapurthalaINR 30, 250

B.E. Instrumentation and Control Engineering: Eligibility

Candidate must have passed the 10+2 or equivalent examination from a recognized state or central board with at least 65% (relaxable for reserved category candidates) of the marks with Physics, Chemistry, Mathematics, and English as the major subjects of study.

  • He/She shall not be having any Supplementary or Compartment in any of the subject/Subjects at 10+2 or equivalent level that is yet to be cleared at the time of taking admissions.
  • Apart from the above-mentioned eligibility criteria’s various colleges and institutes may have their own additional criteria’s which the students would have to satisfy in order to take admission.
  • In case of reserved category students, they would have to present their reservation certificates issued by the competent authorities in order to avail the benefits applicable to them.
  • Most of the Institute give admissions through Common Entrance Test (CET) (like JEE Main, UPSEE, WBJEE, OJEE etc). To get admissions in these institutes candidates would have to qualify the respective entrance exam by securing minimum qualifying marks.

The eligibility criteria’s mentioned above are common to most of the universities and colleges across the country that are offering this course to the students.

B.E. Instrumentation and Control Engineering: Admission Process

Admissions to BE Instrumentation and Control Engineering involves a common entrance test based admission process (as seen across various Universities and colleges in the country) as well as a merit-based selection process (in select few institutes/colleges). 

  • Students who have passed their 10+2 or equivalent level examinations with a minimum of 65% marks (relaxable for reserved category students) can make application in colleges offering the course.
  • Majority of the Universities/Colleges conduct a common entrance test for admission into B.E courses (like BITSAT) or take admissions through commonly held entrance exam like JEE Main, OJEE,WBJEEetc. Hence students would have to make an application for such exams.
  • Students have to qualify these exams (for which they should be eligible to appear) in order to get admission in the course.
  • After the conduct of the test, a merit list of finally qualified candidates is prepared and candidates are invited for admission process by the respective university or college.
  • After admission process final allotment of seats to the candidate takes place and the candidate is asked to deposit the fee for the course and register for the respective academic year.

Admission process would more or less be same across all the colleges and universities that are offering this course.

B.E. Instrumentation and Control Engineering: Syllabus and Course description

The syllabus of the course is divided into 8 semesters spread over a span of four years with each year comprising of two semesters. The syllabus of B.E. Instrumentation and Control Engineering course is divided into various subjects and practical skills that engineering students are taught during the course of their under graduation. The syllabus covers all the aspects related to Instrumentation and Control engineering so as to provide a holistic understanding of the subject to the undergraduate students.

The details regarding the syllabus of the course are mentioned so, as to give a reference to the candidates.

Semester ISemester II
Mathematics-1Mathematics- 2
Physics 1Physics 2
ChemistryMaterial Science
Engineering MechanicsThermodynamics
Electrical EngineeringBasics of Electronics Engineering
Computer and ProgrammingEnvironmental Engineering
Communicative EnglishPractical Lab
Practical LabInstrumentation engineering
Semester IIISemester IV
Mathematics-3Mathematics-4
Engineering Economics and Business ManagementLinear Electronics
Control TheoryMicroprocessor
Simulation TheoryCircuit Theory
Digital TechniqueElectrical Engineering Material
Fundamentals of Mechanical EngineeringControl System design
Practical LabPractical Lab
Semester VSemester VI
Control System and ComponentsMeasurement Technique 2
Micro Controller and its applicationsIndustrial Electronics
Measurement Technique 1Process Control 1
Instrumentation SystemBiomedical Instrumentation
Applied ElectronicsPower Electronics
Electrical and Electronics MeasurementElective subject 1
Minor Project-
Practical Lab-
Semester VIISemester VIII
Digital Signal ProcessingEntrepreneurship Development
Process Control 2Automation
Nonlinear and Digital ControlCalibration of devices
Elective subject 2Elective 3
Industrial Drives and ControlMajor Project
Practical LabPractical Lab

B.E. Instrumentation and Control Engineering: Who Should Opt for?

  • Students who have interest in instrumentation and machine control.
  • Those who have an analytical mindset.
  • Those who are looking for a career in Indian Engineering Services.
  • Those aiming at higher studies in the domain can opt for the course.

B.E. Instrumentation and Control Engineering: Career Prospects

B.E. Instrumentation and Control Engineering is undergraduates have plenty of options to choose from in terms of their career. One can choose to work with firms such as equipment manufacturers, Installation units, maintenance firms, equipment designers etc.

Related B.E. Instrumentation and Control Engineering courses:

Read about more Bachelors in Engineering courses

To provide you a holistic view of the career prospects of the course we have tabled certain areas and the respective roles attached to the same where Instrumentation and Control engineering undergraduates can look for in terms of their career.

Bachelor of Engineering [BE] (Instrumentation & Control Engineering) annual salary
Job ProfileRoleAverage Salary for Fresher’s
Trainee EngineerWork of Trainee engineer is done under the ambit of a senior engineer and is more of an assisting nature.INR 1.2-1.8 Lacs
TechnicianThe job involves proper operating and maintenance of automated equipment so as to generate desired outputs from it.INR 1.8-2.2 Lacs
Installation EngineerThe job involves installation of automated equipment on prescribed location.INR 1.6-2.1 Lacs
Design EngineerThe job of a design engineer involves chalking out design layout for integration of sensors and other automated instruments with the mechanical process in the industry. INR 1.8-2.2 Lacs
Site EngineerA site engineer’s job involves supervision of installation and automation activities that goes on at an industrial site. INR 1.6-2.25 Lacs

Comments

Comments



No Comments To Show

×