MHT CET PYQs for Laws of Motion with Solutions: Practice MHT CET Previous Year Questions

Laws of Motion is a Class 11 chapter in the Physics section of the MHT CET for candidates who are preparing for the PCM (Physics, Chemistry, and Mathematics).

The key topics covered in Laws of Motion PYQs are:

Newton's laws and inertial frames of reference
Weight of a person in a lift
Momentum, impulse and force on a wall
Connected blocks, strings and pulleys
Friction and stopping distance

Practising Laws of Motion MHT CET PYQ helps candidates to understand question pattern, improve calculation speed, and identify concepts which were asked in previous exams.

Based on chapter-wise analysis of the MHT CET Physics paper, you can get less than 1 mark per paper by covering Laws of Motion. The chapter recorded 31 questions across the 80 shifts in the data, and 16 of them came in the 2025 and 2026 papers, where it contributed about 1.0% per shift.

MHT CET Laws of Motion Chapter: Question Count, Marks and Weightage:

0.39 Average questions per shift (2018-2026)	16 Questions in the 2025 and 2026 papers (33 shifts)
31 Questions in the PDF (2019-2026)	0.8% Estimated Physics paper weightage (1.0% in 2025-2026)

The PDF holds 31 questions from MHT CET 2026 to 2019, newest first, each with its exam date and shift. Options are as printed and answer keys are not included.

Laws of Motion PYQ Statistics (2022-2026)

The table below shows the number of questions asked in MHT CET Laws of Motion PYQs. Every shift has 50 Physics questions, so the last column is the average per shift divided by 50.

Year	Total Questions (across shifts)	Shifts in the Data	Average per Shift	Weightage (out of 50 Physics Qs)
2026	7	16	0.44	0.9%
2025	9	17	0.53	1.1%
2024	6	18	0.33	0.7%
2023	3	12	0.25	0.5%
2022	0	1	0.00	0.0%

The 2018 to 2021 papers in the PDF add 6 more questions: 2021 had 2, 2020 had 2, 2019 had 2, 2018 had none.

MHT CET Laws of Motion Important Questions: Based on the Last 5 Years

The major types of questions asked from Laws of Motion in MHT CET cover the following topics:

Topic	Questions in the PDF	Questions in 2022-2026	Average per Shift (2022-2026)
Inertial frames of reference	3	3	0.05
Lift and weighing-machine problems	7	5	0.08
Momentum, impulse and force from bullets, balls and sand	9	8	0.12
Connected blocks, strings and pulleys	8	7	0.11
Other questions	4	2	0.03

Pair PYQs with Other Study Material for MHT CET 2027

Click on the link to practise problems and time management skills:

Resource	Link
MHT CET Sample Paper	Check Here
MHT CET Mock Test	Check Here

Question Style in MHT CET Laws of Motion PYQs

Every question in this PDF is a single-correct MCQ. Lift problems and momentum problems with a gun or a wall come up again and again.

Question Style	What it Tests
Lift problems	The weight of a man in a lift moving up with acceleration a, the reading of a spring balance in a lift, and a child on a weighing machine in a descending lift
Machine gun	The force the person holding a machine gun can bear, given the mass and speed of the bullets and the number fired per second
Impulse and rebound	Balls striking a wall normally and reflected back, and a ball dropped from 20 m that rebounds to 5 m
Blocks and pulleys	Three blocks pulled by a force, two blocks over a smooth pulley, and a block pulled by a rope of mass m
Concept	Which person is in an inertial frame of reference, and the motion of an aircraft when all the forces on it are balanced

How to Use the Laws of Motion PYQ PDF for MHT CET

Start with the 2025 and 2026 papers first, because they hold 16 of the 31 questions.
For lift questions, write R = m(g ± a) and decide the sign from the direction of the acceleration.
For the machine gun, use force = (mass of a bullet × its speed) × the number of bullets per second.
Solve year-wise PYQs by timing yourself, as time management is crucial.
Re-attempt only the questions you got wrong, and note which formula or step you missed.

Video: Laws of Motion PYQs and MCQs

Source: Physics Paathshaala

Laws of Motion PYQ for MHT CET Physics FAQs

Ques. How many questions come from Laws of Motion every year?

Ans. In this PDF, the questions are 7 from 2026, 9 from 2025, 6 from 2024, 3 from 2023 and 2 from 2021 and the rest from earlier papers. In 2025 and 2026 together the chapter had 16 questions across 33 shifts, about 0.48 per shift.

Ques. Which topics are asked most frequently in MHT CET Laws of Motion?

Ans. Momentum, impulse and force from bullets, balls and sand is the largest group with 9 of the 31 questions, about 29%.

Ques. What kind of questions are asked from Laws of Motion?

Ans. Single-correct MCQs. Common ones ask for the weight in a lift, the force from a machine gun or a wall, the acceleration of connected blocks, or which frame is inertial.

Ques. What is the best way to practise Laws of Motion PYQs?

Ans. First solve the 2025 and 2026 questions completely, then the older ones, and finally re-attempt the questions you got wrong.

Ques. Can I score full marks from Laws of Motion?

Ans. In 2025 and 2026 together the chapter had 16 questions across 33 shifts. Learning the lift formula and the impulse relation is enough to secure it. Each Physics question in MHT CET is worth 1 mark.

Ques. Does the Laws of Motion PYQ PDF include solutions?

Ans. No. The PDF contains the questions with their exam date and shift, without answer keys or solutions.

MHT CET PYQs for Laws of Motion with Solutions: Practice MHT CET Previous Year Questions

Laws of Motion PYQ Statistics (2022-2026)

MHT CET Laws of Motion Important Questions: Based on the Last 5 Years

Pair PYQs with Other Study Material for MHT CET 2027

Question Style in MHT CET Laws of Motion PYQs

How to Use the Laws of Motion PYQ PDF for MHT CET

Video: Laws of Motion PYQs and MCQs

Laws of Motion PYQ for MHT CET Physics FAQs

1.
A ball is thrown vertically upwards with an initial velocity of 20 m/s. If the acceleration due to gravity is \( 10 \, \text{m/s}^2 \), what is the maximum height reached by the ball?

2.
The mass of proton, neutron, and helium nucleus are respectively \( 1.0073 \, \text{u}, 1.0087 \, \text{u}, \, 4.0015 \, \text{u} \). The binding energy of the helium nucleus is:

3.
A 2 kg object is hanging vertically from a rope. The tension in the rope is 15 N. What is the acceleration of the object? (Assume \( g = 9.8 \, \text{m/s}^2 \))

4.
A 0.2 kg ball is dropped from a height of 10 meters. What is the velocity of the ball just before it hits the ground? (Assume \( g = 9.8 \, \text{m/s}^2 \) and neglect air resistance.)

5.
A ball is thrown vertically upwards with an initial velocity of 20 m/s. Calculate the time it takes for the ball to reach the highest point. (Assume \( g = 9.8 \, \text{m/s}^2 \))

6.
A 5 kg block is placed on a horizontal surface. A force of 10 N is applied to the block. The coefficient of friction between the block and the surface is 0.2. Find the acceleration of the block.

7.
A magnetic needle is kept in a non-uniform magnetic field. It experiences:

8.
A car accelerates uniformly from rest to a speed of 20 m/s in 10 seconds. What is the car's acceleration?

9.
A light-emitting diode (LED) is fabricated using GaAs semiconductor material whose band gap is \( 1.42 \, \text{eV} \). The wavelength of light emitted from the LED is:

10.
An electric field is given by \( \vec{E} = (6\hat{i} + 5\hat{j} + 3\hat{k}) \, \text{N/C} \). The electric flux through a surface area \( 30\hat{i} \, \text{m}^2 \) lying in the YZ-plane (in SI units) is:

11.
The logic performed by the circuit shown in the figure is equivalent to:

12.
A block of mass \(5\ \text{kg}\) is on a frictionless surface; find its acceleration when a force of \(10\ \text{N}\) is applied.

13.
A car of mass 1000 kg is moving with a velocity of 20 m/s. The driver applies the brakes, and the car comes to rest in 10 seconds. Find the average force exerted by the brakes to stop the car.

14.
Point charge of \( 10 \, \mu C \) is placed at the origin. At what location on the X-axis should a point charge of \( 40 \, \mu C \) be placed so that the net electric field is zero at \( x = 2 \, \text{cm} \) on the X-axis?

Comments

SUBSCRIBE TO OUR NEWS LETTER

Laws of Motion PYQ Statistics (2022-2026)

MHT CET Laws of Motion Important Questions: Based on the Last 5 Years

Pair PYQs with Other Study Material for MHT CET 2027

Question Style in MHT CET Laws of Motion PYQs

How to Use the Laws of Motion PYQ PDF for MHT CET

Video: Laws of Motion PYQs and MCQs

Laws of Motion PYQ for MHT CET Physics FAQs

1.A ball is thrown vertically upwards with an initial velocity of 20 m/s. If the acceleration due to gravity is \( 10 \, \text{m/s}^2 \), what is the maximum height reached by the ball?

2.The mass of proton, neutron, and helium nucleus are respectively \( 1.0073 \, \text{u}, 1.0087 \, \text{u}, \, 4.0015 \, \text{u} \). The binding energy of the helium nucleus is:

3.A 2 kg object is hanging vertically from a rope. The tension in the rope is 15 N. What is the acceleration of the object? (Assume \( g = 9.8 \, \text{m/s}^2 \))

4.A 0.2 kg ball is dropped from a height of 10 meters. What is the velocity of the ball just before it hits the ground? (Assume \( g = 9.8 \, \text{m/s}^2 \) and neglect air resistance.)

5.A ball is thrown vertically upwards with an initial velocity of 20 m/s. Calculate the time it takes for the ball to reach the highest point. (Assume \( g = 9.8 \, \text{m/s}^2 \))

6.A 5 kg block is placed on a horizontal surface. A force of 10 N is applied to the block. The coefficient of friction between the block and the surface is 0.2. Find the acceleration of the block.

7.A magnetic needle is kept in a non-uniform magnetic field. It experiences:

8.A car accelerates uniformly from rest to a speed of 20 m/s in 10 seconds. What is the car's acceleration?

9.A light-emitting diode (LED) is fabricated using GaAs semiconductor material whose band gap is \( 1.42 \, \text{eV} \). The wavelength of light emitted from the LED is:

10.An electric field is given by \( \vec{E} = (6\hat{i} + 5\hat{j} + 3\hat{k}) \, \text{N/C} \). The electric flux through a surface area \( 30\hat{i} \, \text{m}^2 \) lying in the YZ-plane (in SI units) is:

11.The logic performed by the circuit shown in the figure is equivalent to:

12.A block of mass \(5\ \text{kg}\) is on a frictionless surface; find its acceleration when a force of \(10\ \text{N}\) is applied.

13.A car of mass 1000 kg is moving with a velocity of 20 m/s. The driver applies the brakes, and the car comes to rest in 10 seconds. Find the average force exerted by the brakes to stop the car.

14.Point charge of \( 10 \, \mu C \) is placed at the origin. At what location on the X-axis should a point charge of \( 40 \, \mu C \) be placed so that the net electric field is zero at \( x = 2 \, \text{cm} \) on the X-axis?

Comments

SUBSCRIBE TO OUR NEWS LETTER

1.
A ball is thrown vertically upwards with an initial velocity of 20 m/s. If the acceleration due to gravity is \( 10 \, \text{m/s}^2 \), what is the maximum height reached by the ball?

2.
The mass of proton, neutron, and helium nucleus are respectively \( 1.0073 \, \text{u}, 1.0087 \, \text{u}, \, 4.0015 \, \text{u} \). The binding energy of the helium nucleus is:

3.
A 2 kg object is hanging vertically from a rope. The tension in the rope is 15 N. What is the acceleration of the object? (Assume \( g = 9.8 \, \text{m/s}^2 \))

4.
A 0.2 kg ball is dropped from a height of 10 meters. What is the velocity of the ball just before it hits the ground? (Assume \( g = 9.8 \, \text{m/s}^2 \) and neglect air resistance.)

5.
A ball is thrown vertically upwards with an initial velocity of 20 m/s. Calculate the time it takes for the ball to reach the highest point. (Assume \( g = 9.8 \, \text{m/s}^2 \))

6.
A 5 kg block is placed on a horizontal surface. A force of 10 N is applied to the block. The coefficient of friction between the block and the surface is 0.2. Find the acceleration of the block.

7.
A magnetic needle is kept in a non-uniform magnetic field. It experiences:

8.
A car accelerates uniformly from rest to a speed of 20 m/s in 10 seconds. What is the car's acceleration?

9.
A light-emitting diode (LED) is fabricated using GaAs semiconductor material whose band gap is \( 1.42 \, \text{eV} \). The wavelength of light emitted from the LED is:

10.
An electric field is given by \( \vec{E} = (6\hat{i} + 5\hat{j} + 3\hat{k}) \, \text{N/C} \). The electric flux through a surface area \( 30\hat{i} \, \text{m}^2 \) lying in the YZ-plane (in SI units) is:

11.
The logic performed by the circuit shown in the figure is equivalent to:

12.
A block of mass \(5\ \text{kg}\) is on a frictionless surface; find its acceleration when a force of \(10\ \text{N}\) is applied.

13.
A car of mass 1000 kg is moving with a velocity of 20 m/s. The driver applies the brakes, and the car comes to rest in 10 seconds. Find the average force exerted by the brakes to stop the car.

14.
Point charge of \( 10 \, \mu C \) is placed at the origin. At what location on the X-axis should a point charge of \( 40 \, \mu C \) be placed so that the net electric field is zero at \( x = 2 \, \text{cm} \) on the X-axis?