MHT CET PYQs for Types of Solutions with Solutions: Practice MHT CET Previous Year Questions

Types of Solutions is a topic from the Solutions chapter of Class 12 Chemistry, and it is part of the Chemistry section of the MHT CET for candidates who are preparing for the PCM (Physics, Chemistry, and Mathematics).

The key topics covered in Types of Solutions PYQs are:

Solid in solid solutions (alloys)
Solid in liquid solutions
Gaseous solutions

Practising Types of Solutions MHT CET PYQ helps candidates to understand question pattern, improve calculation speed, and identify concepts which were asked in previous exams.

Based on chapter-wise analysis of the MHT CET Chemistry paper, you can get less than 1 mark per paper by covering Types of Solutions. The chapter recorded 5 questions across the 80 shifts in the data, and 3 of them came in the 2025 and 2026 papers, where it contributed about 0.2% per shift.

MHT CET Types of Solutions Chapter: Question Count, Marks and Weightage:

0.06 Average questions per shift (2018-2026)	3 Questions in the 2025 and 2026 papers (33 shifts)
5 Questions in the PDF (2021-2026)	0.1% Estimated Chemistry paper weightage (0.2% in 2025-2026)

The PDF holds 5 questions from MHT CET 2026 to 2021, newest first, each with its exam date and shift. Options are as printed and answer keys are not included.

Types of Solutions PYQ Statistics (2022-2026)

The table below shows the number of questions asked in MHT CET Types of Solutions PYQs. Every shift has 50 Chemistry questions, so the last column is the average per shift divided by 50.

Year	Total Questions (across shifts)	Shifts in the Data	Average per Shift	Weightage (out of 50 Chemistry Qs)
2026	2	16	0.12	0.2%
2025	1	17	0.06	0.1%
2024	1	18	0.06	0.1%
2023	0	12	0.00	0.0%
2022	0	1	0.00	0.0%

The 2018 to 2021 papers in the PDF add 1 more questions: 2021 had 1, 2020 had none, 2019 had none, 2018 had none.

MHT CET Types of Solutions Important Questions: Based on the Last 5 Years

The major types of questions asked from Types of Solutions in MHT CET cover the following topics:

Topic	Questions in the PDF	Questions in 2022-2026	Average per Shift (2022-2026)
Solid in solid solutions: brass and alloys	2	2	0.03
Solid in liquid solutions, including benzoic acid in benzene	2	2	0.03
Gaseous solutions: air	1	0	0.00

Pair PYQs with Other Study Material for MHT CET 2027

Click on the link to practise problems and time management skills:

Resource	Link
MHT CET Sample Paper	Check Here
MHT CET Mock Test	Check Here

Question Style in MHT CET Types of Solutions PYQs

All 5 questions in this PDF are single-correct MCQs that ask for the type of a solution.

Question Style	What it Tests
Alloys	The type of solution that brass is, and the type of solution an alloy is
Solid in liquid	The solution that has a solid as the solute and a liquid as the solvent, and benzoic acid in benzene
Gaseous solution	The solution of which air is an example

How to Use the Types of Solutions PYQ PDF for MHT CET

Start with the 2025 and 2026 papers first, because they hold 3 of the 5 questions.
Learn the nine types of solution as pairs of solute and solvent, with one example for each.
Solve year-wise PYQs by timing yourself, as time management is crucial.
Re-attempt only the questions you got wrong, and note which formula or step you missed.

Video: Types of Solutions PYQs and MCQs

Source: Abhishek Sir Chemistry ASC & Tapi Miss Biology

Types of Solutions PYQ for MHT CET Chemistry FAQs

Ques. How many questions come from Types of Solutions every year?

Ans. In this PDF, the questions are 2 from 2026, 1 from 2025, 1 from 2024 and 1 from 2021. In 2025 and 2026 together the chapter had 3 questions across 33 shifts, about 0.09 per shift.

Ques. Which topics are asked most frequently in MHT CET Types of Solutions?

Ans. Solid in solid solutions: brass and alloys is the largest group with 2 of the 5 questions, about 40%.

Ques. What kind of questions are asked from Types of Solutions?

Ans. Short theory MCQs that name the type of a solution from its solute and solvent.

Ques. What is the best way to practise Types of Solutions PYQs?

Ans. First solve the 2025 and 2026 questions completely, then the older ones, and finally re-attempt the questions you got wrong.

Ques. Can I score full marks from Types of Solutions?

Ans. In 2025 and 2026 together the chapter had 3 questions across 33 shifts. Learning the nine types of solution with an example each is enough to secure it. Each Chemistry question in MHT CET is worth 1 mark.

Ques. Does the Types of Solutions PYQ PDF include solutions?

Ans. No. The PDF contains the questions with their exam date and shift, without answer keys or solutions.

MHT CET PYQs for Types of Solutions with Solutions: Practice MHT CET Previous Year Questions

Types of Solutions PYQ Statistics (2022-2026)

MHT CET Types of Solutions Important Questions: Based on the Last 5 Years

Pair PYQs with Other Study Material for MHT CET 2027

Question Style in MHT CET Types of Solutions PYQs

How to Use the Types of Solutions PYQ PDF for MHT CET

Video: Types of Solutions PYQs and MCQs

Types of Solutions PYQ for MHT CET Chemistry FAQs

1.
Find the osmotic pressure of a \(0.1\,M\) glucose solution at \(27^\circ C\) \((R = 0.0821\,L\,atm\,mol^{-1}K^{-1})\).

2.
A solution is prepared by dissolving 2 g of a non-volatile solute in 500 mL of solution at \(27^{\circ}\text{C}\). The osmotic pressure of the solution is 0.82 atm. The molar mass of the solute is:

3.
What is the Van’t Hoff factor (\(i\)) for a completely dissociated solution of \(K_2SO_4\) in water?

4.
Calculate the solubility of gas in solvent at 25$^{\circ}$C and 0.8 atm if Henry's law constant for solvent is $6.8 \times 10^{-4}$ moldm$^{-3}$ atm$^{-1}$.

5.
Identify a solution which contains solid as solute and liquid as solvent.

6.
What type of solution is the $H_2$ in palladium?

7.
Calculate the osmotic pressure of a \(0.1\ \text{M}\) solution at \(27^\circ C\).

8.
A solution of 8 g of a certain organic compound in 2 dm³ water develops osmotic pressure 0.6 atm at 300 K. Calculate the molar mass of compound. [R = 0.082 atm dm^3 K^{-1} mol^{-1}]

9.
Calculate osmotic pressure of 0.1 M aqueous solution of an electrolyte at 300 K if van't Hoff factor is 1.125. [R = 0.0821 atmdm$^3$ K$^{-1}$ mol$^{-1}$]

10.
The Van't Hoff factor for a solution of \( \text{K}_2\text{SO}_4 \) in water is:

11.
What type of solution is a brass ?

12.
Calculate the osmotic pressure of \(0.1\,M\) glucose at \(27^\circ C\).

13.
What is the Van't Hoff factor (\(i\)) for a non-electrolyte?

14.
A solution is prepared by dissolving \(2\) gram of non-volatile solute in \(500\) mL solution at \(27^\circ\text{C}\). The osmotic pressure of the solution is \(0.82\) atm. The molar mass of the solute is:

15.
The Van't Hoff factor for a solution of $K_2SO_4$ in water is:

Comments

SUBSCRIBE TO OUR NEWS LETTER

Types of Solutions PYQ Statistics (2022-2026)

MHT CET Types of Solutions Important Questions: Based on the Last 5 Years

Pair PYQs with Other Study Material for MHT CET 2027

Question Style in MHT CET Types of Solutions PYQs

How to Use the Types of Solutions PYQ PDF for MHT CET

Video: Types of Solutions PYQs and MCQs

Types of Solutions PYQ for MHT CET Chemistry FAQs

1.Find the osmotic pressure of a \(0.1\,M\) glucose solution at \(27^\circ C\) \((R = 0.0821\,L\,atm\,mol^{-1}K^{-1})\).

2.A solution is prepared by dissolving 2 g of a non-volatile solute in 500 mL of solution at \(27^{\circ}\text{C}\). The osmotic pressure of the solution is 0.82 atm. The molar mass of the solute is:

3.What is the Van’t Hoff factor (\(i\)) for a completely dissociated solution of \(K_2SO_4\) in water?

4.Calculate the solubility of gas in solvent at 25$^{\circ}$C and 0.8 atm if Henry's law constant for solvent is $6.8 \times 10^{-4}$ moldm$^{-3}$ atm$^{-1}$.

5.Identify a solution which contains solid as solute and liquid as solvent.

6.What type of solution is the $H_2$ in palladium?

7.Calculate the osmotic pressure of a \(0.1\ \text{M}\) solution at \(27^\circ C\).

8.A solution of 8 g of a certain organic compound in 2 dm³ water develops osmotic pressure 0.6 atm at 300 K. Calculate the molar mass of compound. [R = 0.082 atm dm^3 K^{-1} mol^{-1}]

9.Calculate osmotic pressure of 0.1 M aqueous solution of an electrolyte at 300 K if van't Hoff factor is 1.125. [R = 0.0821 atmdm$^3$ K$^{-1}$ mol$^{-1}$]

10.The Van't Hoff factor for a solution of \( \text{K}_2\text{SO}_4 \) in water is:

11.What type of solution is a brass ?

12.Calculate the osmotic pressure of \(0.1\,M\) glucose at \(27^\circ C\).

13.What is the Van't Hoff factor (\(i\)) for a non-electrolyte?

14.A solution is prepared by dissolving \(2\) gram of non-volatile solute in \(500\) mL solution at \(27^\circ\text{C}\). The osmotic pressure of the solution is \(0.82\) atm. The molar mass of the solute is:

15.The Van't Hoff factor for a solution of $K_2SO_4$ in water is:

Comments

SUBSCRIBE TO OUR NEWS LETTER

1.
Find the osmotic pressure of a \(0.1\,M\) glucose solution at \(27^\circ C\) \((R = 0.0821\,L\,atm\,mol^{-1}K^{-1})\).

2.
A solution is prepared by dissolving 2 g of a non-volatile solute in 500 mL of solution at \(27^{\circ}\text{C}\). The osmotic pressure of the solution is 0.82 atm. The molar mass of the solute is:

3.
What is the Van’t Hoff factor (\(i\)) for a completely dissociated solution of \(K_2SO_4\) in water?

4.
Calculate the solubility of gas in solvent at 25$^{\circ}$C and 0.8 atm if Henry's law constant for solvent is $6.8 \times 10^{-4}$ moldm$^{-3}$ atm$^{-1}$.

5.
Identify a solution which contains solid as solute and liquid as solvent.

6.
What type of solution is the $H_2$ in palladium?

7.
Calculate the osmotic pressure of a \(0.1\ \text{M}\) solution at \(27^\circ C\).

8.
A solution of 8 g of a certain organic compound in 2 dm³ water develops osmotic pressure 0.6 atm at 300 K. Calculate the molar mass of compound. [R = 0.082 atm dm^3 K^{-1} mol^{-1}]

9.
Calculate osmotic pressure of 0.1 M aqueous solution of an electrolyte at 300 K if van't Hoff factor is 1.125. [R = 0.0821 atmdm$^3$ K$^{-1}$ mol$^{-1}$]

10.
The Van't Hoff factor for a solution of \( \text{K}_2\text{SO}_4 \) in water is:

11.
What type of solution is a brass ?

12.
Calculate the osmotic pressure of \(0.1\,M\) glucose at \(27^\circ C\).

13.
What is the Van't Hoff factor (\(i\)) for a non-electrolyte?

14.
A solution is prepared by dissolving \(2\) gram of non-volatile solute in \(500\) mL solution at \(27^\circ\text{C}\). The osmotic pressure of the solution is \(0.82\) atm. The molar mass of the solute is:

15.
The Van't Hoff factor for a solution of $K_2SO_4$ in water is: