NCERT Solutions For Chapter 14: Semiconductor Electronics

Jasmine Grover logo

Jasmine Grover

Education Journalist | Study Abroad Lead

NCERT Solutions for Class 12 Physics Chapter 14 Semiconductor Electronics: Materials, Devices and Simple Circuits are provided in the article below. A semiconductor is a material whose resistivity is between a conductor such as metallic copper and an insulator such as glass. Its resistivity falls as the temperature rises which is completely opposite to any metal. 

Class 12 Physics Chapter 14 Semiconductor Electronics belong to Unit 9 - Electronic Devices which has a weightage of 7 marks in the CBSE Board examinations. Class 12 Physics Semiconductor Electronics NCERT Solutions covers the concepts of intrinsic and extrinsic semiconductors, P-n Junction, and Rectifiers

Download PDF: NCERT Solutions for Class 12 Physics Chapter 14

NCERT Solutions for Class 12 Physics Chapter 14

NCERT Solutions For Class 12 Physics: Chapter 14 Semiconductor Electronics: Materials, Devices and Simple CircuitsNCERT Solutions For Class 12 Physics Chapter 14 Semiconductor Electronics: Materials, Devices and Simple CircuitsNCERT Solutions For Class 12 Physics Chapter 14 Semiconductor Electronics: Materials, Devices and Simple CircuitsNCERT Solutions For Class 12 Physics Chapter 14 Semiconductor Electronics: Materials, Devices and Simple CircuitsNCERT Solutions For Class 12 Physics Chapter 14 Semiconductor Electronics: Materials, Devices and Simple CircuitsNCERT Solutions For Class 12 Physics Chapter 14 Semiconductor Electronics: Materials, Devices and Simple Circuits

Class 12 Physics Chapter 14 – Topics Covered

  • Semiconductors have resistivity or conductivity in between that of metals and insulators.
ρ ~ 10-5. 106 Ωm, σ ~ 10+5 .10-6 Sm-1
  • Types of Semiconductors: There are two types of semiconductors – Elements Semiconductors and Compound Semiconductors.
(i) Elements Semiconductors are available in natural form, e.g. germanium and silicon.
(ii) Compound Semiconductors are made by compounding the metals, e.g. InP, CdS, polyaniline, GaAs, CdSe, anthracene, etc.
  • On the basis of purity, semiconductors are classified as intrinsic semiconductors and extrinsic semiconductors.
    Intrinsic Semiconductors are pure semiconductor that does not have any significant dopant species present

ne  = nh = ni 

where, ne and nh are the number densities of electrons and holes respectively and ni is the intrinsic carrier concentration.

  • Extrinsic Semiconductors are pure semiconductors that are doped with an impurity.
Extrinsic semiconductors are classified into two types: p-type semiconductors and n-type semiconductors.
  • Formation of Depletion Region in p-n junction: During the formation of a p-n junction, due to the concentration gradient across the p and n sides, the holes diffuse from the p-side to the n-side and electrons diffuse from the n-side to the p-side.

Formation of Depletion Region in p-n junction

Formation of Depletion Region in p-n junction


Also Read:

Check-Out: 

CBSE CLASS XII Related Questions

  • 1.
    An electric field $\vec{E}$ is established across the ends of a cylindrical conductor of length L and area of cross-section A. Discuss how electrons attain an average velocity, independent of time. Hence, obtain a relation between current in the conductor and this ‘average velocity’ of electrons.


      • 2.
        Two air-filled capacitors of capacitances $C_1$ and $C_2$ are connected in parallel with a dc battery. After the capacitors are fully charged, a slab of dielectric constant K is inserted between the plates of each capacitor. How will the (i) charge on each capacitor and (ii) energy stored in the capacitor affected after the slab is introduced.


          • 3.
            An astronomical telescope consists of two converging lenses. One of them of large aperture and large focal length is called objective lens and the other one, of smaller focal length and smaller aperture is called the eyepiece. It is used to see distant objects which are not seen clearly with naked eyes. The image formed by the objective lens acts as an object for the eyepiece and the final image produced by the eyepiece is magnified.


              • 4.
                With the help of a labelled diagram, explain the principle, construction and working of an a.c. generator.


                  • 5.
                    Derive an expression for the capacitance of a parallel plate capacitor of plate area A and plate separation d with air present between the plates.


                      • 6.
                        Consider the nuclear reaction \( X \to Y + Z \). Let \( M_x \), \( M_y \), and \( M_z \) be the masses of the three nuclei X, Y, and Z respectively. Then which of the following relations hold true?

                          • \( (M_x - M_z)<M_y \)
                          • \( (M_x - M_y)<M_z \)
                          • \( M_x>(M_y + M_z) \)
                          • \( M_x<(M_y + M_z) \)
                        CBSE CLASS XII Previous Year Papers

                        Comments


                        No Comments To Show