Name The Factors On Which The Specific Resistance Of A Wire Depends Upon.

The specific resistance of a wire depends on the material of the wire and its temperature.

Specific resistance

Specific resistance is the resistance offered per unit length and unit cross-sectional area when a known voltage is applied. The formula of specific resistance is as follows:

$\rho = {RA \over L}$

Where,

⍴ = Specific resistance
R = Resistance
A = Cross-sectional area
L = Length of the wire

The SI unit of specific resistance is ohm meter (Ωm).

Related Questions

Read More:

Ohm’s Law – Important Topics
Resistance Formula	Difference between AC and DC	Internal resistance formula
Wheatstone Bridge	Differences Between Acceleration and Velocity	Difference between kva and kw
Potentiometer	Cells, emf, Internal Resistance	Unit of Specific Resistance
Static Electricity	Ohm’s Law and its Limitations	Resistor Colour Codes
Ampere	Resistivity Temperature Dependence	Permittivity And Permeability
Electric Dipole	Relation between kva and kw	Combination of Resistors
Meter Bridge	Difference between RTD and thermocouple	Electromotive Force
Current Electricity	Relation between resistance and length	Current Density
Types of Current	Relation between power and resistance	Types of Resistors
Uses of Resistor	Difference Between Primary Cell and Secondary Cell	Electrical Formula
Drift Velocity	Difference between emf and voltage	Power Of Alternating Current
Resistivity formula	Difference between air conditioning and refrigeration	Current density formula
Carbon Resistor	Difference between earth and neutral	Voltage divider formula
Unit of Current	Cells in Series and in Parallel	Circuit Diagram
Power transformers	NCERT Solutions Current Electricity	Derivation of Drift Velocity

CBSE CLASS XII Related Questions

1.
An electric field $\vec{E}$ is established across the ends of a cylindrical conductor of length L and area of cross-section A. Discuss how electrons attain an average velocity, independent of time. Hence, obtain a relation between current in the conductor and this ‘average velocity’ of electrons.

View Solution

2.
Derive an expression for the capacitance of a parallel plate capacitor of plate area A and plate separation d with air present between the plates.

View Solution

3.
Two air-filled capacitors of capacitances $C_1$ and $C_2$ are connected in parallel with a dc battery. After the capacitors are fully charged, a slab of dielectric constant K is inserted between the plates of each capacitor. How will the (i) charge on each capacitor and (ii) energy stored in the capacitor affected after the slab is introduced.

View Solution

4.
A charged particle $+q$ in an electric field $\vec{E}$ experiences a force in the direction of the electric field. As a result, its kinetic energy changes. Similarly, the charged particle also experiences a force when it moves in a magnetic field $\vec{B}$. But this magnetic force is perpendicular to both velocity $\vec{v}$ of the charged particle and the magnetic field $\vec{B}$, so it cannot change the kinetic energy of the charged particle. Consider two charged particles 1 and 2 of masses $m$ and $\frac{m}{2}$ having charges $-q$ and $+2q$ respectively. They are accelerated from rest through the same potential difference $V$ and acquire kinetic energy $K_1$ and $K_2$. Then they enter in a region of uniform magnetic field $\vec{B}$ perpendicular to their velocities.

5.
Two copper wires having their radii in the ratio of 3 : 2 are connected in series across a battery. Find the ratio of the drift velocities of the electrons in the wires.

View Solution

6.
A student sets up the circuit as shown in the figure to find the value of unknown resistance X and records a set of readings of the voltmeter and the ammeter by using the rheostat.

Name The Factors On Which The Specific Resistance Of A Wire Depends Upon.

Specific resistance

Related Questions

CBSE CLASS XII Related Questions

2.
Derive an expression for the capacitance of a parallel plate capacitor of plate area A and plate separation d with air present between the plates.

5.
Two copper wires having their radii in the ratio of 3 : 2 are connected in series across a battery. Find the ratio of the drift velocities of the electrons in the wires.

6.
A student sets up the circuit as shown in the figure to find the value of unknown resistance X and records a set of readings of the voltmeter and the ammeter by using the rheostat.

Similar Physics Concepts

Comments

SUBSCRIBE TO OUR NEWS LETTER

Name The Factors On Which The Specific Resistance Of A Wire Depends Upon.

Specific resistance

Related Questions

CBSE CLASS XII Related Questions

2.Derive an expression for the capacitance of a parallel plate capacitor of plate area A and plate separation d with air present between the plates.

5.Two copper wires having their radii in the ratio of 3 : 2 are connected in series across a battery. Find the ratio of the drift velocities of the electrons in the wires.

6.A student sets up the circuit as shown in the figure to find the value of unknown resistance X and records a set of readings of the voltmeter and the ammeter by using the rheostat.

Similar Physics Concepts

Comments

SUBSCRIBE TO OUR NEWS LETTER

2.
Derive an expression for the capacitance of a parallel plate capacitor of plate area A and plate separation d with air present between the plates.

5.
Two copper wires having their radii in the ratio of 3 : 2 are connected in series across a battery. Find the ratio of the drift velocities of the electrons in the wires.

6.
A student sets up the circuit as shown in the figure to find the value of unknown resistance X and records a set of readings of the voltmeter and the ammeter by using the rheostat.