Name The Factors On Which The Specific Resistance Of A Wire Depends Upon.

The specific resistance of a wire depends on the material of the wire and its temperature.

Specific resistance

Specific resistance is the resistance offered per unit length and unit cross-sectional area when a known voltage is applied. The formula of specific resistance is as follows:

$\rho = {RA \over L}$

Where,

⍴ = Specific resistance
R = Resistance
A = Cross-sectional area
L = Length of the wire

The SI unit of specific resistance is ohm meter (Ωm).

Related Questions

Read More:

Ohm’s Law – Important Topics
Resistance Formula	Difference between AC and DC	Internal resistance formula
Wheatstone Bridge	Differences Between Acceleration and Velocity	Difference between kva and kw
Potentiometer	Cells, emf, Internal Resistance	Unit of Specific Resistance
Static Electricity	Ohm’s Law and its Limitations	Resistor Colour Codes
Ampere	Resistivity Temperature Dependence	Permittivity And Permeability
Electric Dipole	Relation between kva and kw	Combination of Resistors
Meter Bridge	Difference between RTD and thermocouple	Electromotive Force
Current Electricity	Relation between resistance and length	Current Density
Types of Current	Relation between power and resistance	Types of Resistors
Uses of Resistor	Difference Between Primary Cell and Secondary Cell	Electrical Formula
Drift Velocity	Difference between emf and voltage	Power Of Alternating Current
Resistivity formula	Difference between air conditioning and refrigeration	Current density formula
Carbon Resistor	Difference between earth and neutral	Voltage divider formula
Unit of Current	Cells in Series and in Parallel	Circuit Diagram
Power transformers	NCERT Solutions Current Electricity	Derivation of Drift Velocity

CBSE CLASS XII Related Questions

1.
A parallel beam of monochromatic light falls normally on a single slit of width $a$ and a diffraction pattern is observed on a screen placed at distance $D$ from the slit. Explain:
(I) the formation of maxima and minima in the diffraction pattern, and
(II) why the maxima go on becoming weaker and weaker with its increasing number $n$.

View Solution

2.
A wire of length $L$ is bent round into (i) a square coil having $N$ turns and (ii) a circular coil having $N$ turns. The coil in both cases is free to turn about a vertical axis coinciding with the plane of the coil, in a uniform, horizontal magnetic field and carry the same currents. Find the ratio of the maximum value of the torque acting on the square coil to that on the circular coil.

View Solution

3.
(I) The real image of an object placed between $f$ and $2f$ from a convex lens can be seen on a screen placed at the image location. If the screen is removed, is the image still there? Explain.
(II) Plane and convex mirrors produce virtual images of objects. Can they produce real images under some circumstances? Explain.

View Solution

4.
In a region, the electric potential varies as $V = 10 - 50x$, where $V$ is in volts and $x$ is in meters. The electric field in the region is

$10\ \text{N/C}$ along $+x$
$10\ \text{N/C}$ along $-x$
$50\ \text{N/C}$ along $+x$
$50\ \text{N/C}$ along $-x$

View Solution

5.
A ray of light MN is incident normally on the face corresponding with side AB of a prism with an isosceles right-angled triangular base ABC. Trace the path of the ray as it passes through the prism when the refractive index of the prism material is (i) $\sqrt{2}$, and (ii) $\sqrt{3}$.

View Solution

6.
A current of $4.0\,\text{A}$ flows through a wire of length $1\,\text{m}$ and cross-sectional area $1.0\,\text{mm}^2$, when a potential difference of $2\,\text{V}$ is applied across its ends. Calculate the resistivity of the material of the wire.

View Solution

Name The Factors On Which The Specific Resistance Of A Wire Depends Upon.

Specific resistance

Related Questions

CBSE CLASS XII Related Questions

4.
In a region, the electric potential varies as \(V = 10 - 50x\), where \(V\) is in volts and \(x\) is in meters. The electric field in the region is

5.
A ray of light MN is incident normally on the face corresponding with side AB of a prism with an isosceles right-angled triangular base ABC. Trace the path of the ray as it passes through the prism when the refractive index of the prism material is (i) $\sqrt{2}$, and (ii) $\sqrt{3}$.

6.
A current of \(4.0\,\text{A}\) flows through a wire of length \(1\,\text{m}\) and cross-sectional area \(1.0\,\text{mm}^2\), when a potential difference of \(2\,\text{V}\) is applied across its ends. Calculate the resistivity of the material of the wire.

Similar Physics Concepts

Comments

SUBSCRIBE TO OUR NEWS LETTER

Name The Factors On Which The Specific Resistance Of A Wire Depends Upon.

Specific resistance

Related Questions

CBSE CLASS XII Related Questions

4.In a region, the electric potential varies as \(V = 10 - 50x\), where \(V\) is in volts and \(x\) is in meters. The electric field in the region is

5.A ray of light MN is incident normally on the face corresponding with side AB of a prism with an isosceles right-angled triangular base ABC. Trace the path of the ray as it passes through the prism when the refractive index of the prism material is (i) $\sqrt{2}$, and (ii) $\sqrt{3}$.

6.A current of \(4.0\,\text{A}\) flows through a wire of length \(1\,\text{m}\) and cross-sectional area \(1.0\,\text{mm}^2\), when a potential difference of \(2\,\text{V}\) is applied across its ends. Calculate the resistivity of the material of the wire.

Similar Physics Concepts

Comments

SUBSCRIBE TO OUR NEWS LETTER

4.
In a region, the electric potential varies as \(V = 10 - 50x\), where \(V\) is in volts and \(x\) is in meters. The electric field in the region is

5.
A ray of light MN is incident normally on the face corresponding with side AB of a prism with an isosceles right-angled triangular base ABC. Trace the path of the ray as it passes through the prism when the refractive index of the prism material is (i) $\sqrt{2}$, and (ii) $\sqrt{3}$.

6.
A current of \(4.0\,\text{A}\) flows through a wire of length \(1\,\text{m}\) and cross-sectional area \(1.0\,\text{mm}^2\), when a potential difference of \(2\,\text{V}\) is applied across its ends. Calculate the resistivity of the material of the wire.