GATE 2027 Robotics and Automation (RA) is a brand-new paper introduced by IIT Madras, so no direct previous year papers exist yet for this subject. These sample papers are built strictly on the official RA syllabus so you get exam-accurate practice from day one.

Official website: https://gate2027.iitm.ac.in/

GATE Robotics and Automation Sample Papers 2027

GATE Robotics and Automation Sample Paper 1

Download

GATE Robotics and Automation Sample Paper 2

Download

GATE Robotics and Automation Sample Paper 3

Download

GATE Robotics and Automation Sample Paper 4

Download

Solve each paper in one timed sitting of 180 minutes, exactly like the real GATE RA exam, instead of breaking it across multiple days.

You can download these sample papers from Collegedunia, and once GATE 2027 registration opens you should also check gate2027.iitm.ac.in for the official mock test link.

  • GATE 2027 registration opens 14 August 2026 and closes 21 September 2026 (with late fee till 30 September 2026).
  • Exam dates are 6, 7, 13, 14, 20 and 21 February 2027, held in forenoon and afternoon shifts.
  • Robotics and Automation (RA) is a completely new paper for GATE 2027, so there are no official PYQs, only syllabus-based sample papers.
  • Total marks are 100, split as 15 marks General Aptitude, 60 marks compulsory Part A, and 25 marks optional Part B.
  • Mode and duration is a 180-minute computer based test (CBT) with MCQ, MSQ, and NAT questions.
  • Part B choice is between B1 Electrical Engineering and B2 Mechanical Engineering, selected during the exam itself.
  • Result for GATE 2027 is expected on 19 March 2027.

GATE R&A Sample Paper

GATE Robotics and Automation Exam Pattern and Marks Distribution 2027

GATE RA 2027 carries 100 marks across 65 questions in a single 180-minute session. Every candidate attempts the same General Aptitude and Part A sections, then picks one Part B stream.

  • General Aptitude: 15 marks, common to every GATE paper.
  • Part A (common, compulsory): 60 marks, covering Engineering Mathematics, Basics of Mechatronics, and Principles of Robotics and Automation.
  • Part B (optional, choose one): 25 marks, either B1 Electrical Engineering or B2 Mechanical Engineering.
  • Question types: MCQ, MSQ, and NAT, with partial marking allowed on eligible MSQs.
  • Negative marking: one-third mark deducted for a wrong 1-mark MCQ, two-thirds for a wrong 2-mark MCQ, and no negative marking on NAT, MSQ, or unanswered questions.

Since Part A alone carries 60 of the 100 marks, students should build their sample paper practice around Engineering Mathematics, Mechatronics, and Robotics Principles first.

GATE Robotics and Automation Sample Papers - Why the New Pattern Matters Most

RA has no exam history, so every sample paper you solve should be checked against the exact 2027 syllabus rather than an older robotics course outline.

  • Older robotics or mechatronics question banks may not match GATE's DOF, kinematics, and CIM weightage exactly, so cross-check topics before solving.
  • Sample papers built on the current syllabus prepare you for the interdisciplinary mix of maths, mechatronics, and your chosen Part B stream.
  • Attempting full-length papers under a 180-minute timer is the only way to judge your real pace across three different subject blocks in one paper.

GATE Robotics and Automation Chapter Wise Weightage - High Scoring Topics to Focus in Sample Papers

Part A is compulsory for every candidate and carries the bulk of the marks, so it deserves the largest share of your sample paper time.

Chapter/Subject Questions Difficulty What to Watch For
Engineering Mathematics 6-8 Moderate Linear Algebra and Probability carry the most repeat-style numericals.
Basics of Mechatronics 6-8 Moderate to High Sensors, actuators, and Python/data structures are frequently mixed into one question.
Principles of Robotics and Automation 8-10 High DOF calculation, rotation matrices, and forward kinematics are the core scoring zone.
Part B1 - Electrical Engineering 6-8 Moderate Control systems and analog circuits questions often carry two marks each.
Part B2 - Mechanical Engineering 6-8 Moderate Kinematics of rigid bodies and machine design basics repeat across papers.

Do not skip Engineering Mathematics just because it looks basic, since these are the easiest marks to lock in a brand-new paper with no PYQ trend to lean on.

GATE Robotics and Automation Sample Paper Video Solutions 2027 - Watch Before You Start Solving

Since RA has no previous year paper walkthrough yet, start with a syllabus and pattern breakdown before you attempt your first sample paper.

This helps you map every sample paper question back to the exact Part A or Part B section it belongs to, which is the fastest way to build accuracy in a new exam.

Watch:

Source: GATE 2027 Robotics and Automation (RA) syllabus, exam pattern and marks distribution lecture, covering Part A, Part B1, and Part B2 weightage (YouTube).

How to Use GATE Robotics and Automation Sample Papers to Clear in First Attempt

You get the most out of these sample papers by treating each one as a full 180-minute mock rather than a topic-wise quiz.

  • Attempt each paper in one sitting with a timer set to 180 minutes.
  • Solve Part A first since it is compulsory and carries 60 of the 100 marks.
  • Pick the same Part B stream every time so you build speed in one section instead of switching between B1 and B2.
  • Recheck every DOF, rotation matrix, and kinematics numerical after the timer ends, since these are the highest-weightage question types.
  • Log your negative marking losses separately to see if guesswork on MCQs is costing you more than it earns.

GATE Robotics and Automation Section B Numerical Strategy

Part B numericals decide whether your Electrical or Mechanical stream choice is actually working for you, so track them closely across every sample paper.

  • Attempt Part B1 control systems or Part B2 rigid body kinematics numericals only after Part A is fully attempted.
  • Time-box Part B to around 55-60 minutes so Part A does not lose its share of the 180 minutes.
  • Redo any wrong Part B numerical from scratch instead of only reading the solution.
  • Switch streams only if your sample paper scores in one stream stay consistently lower after three full attempts.

GATE Robotics and Automation 4 Week Preparation Plan Using Sample Papers

  • Week 1: Cover Engineering Mathematics and Basics of Mechatronics, then attempt Sample Paper 1 focusing only on Part A questions.
  • Week 2: Study Principles of Robotics and Automation in depth, then attempt Sample Paper 2 and 3 as full 180-minute mocks.
  • Week 3: Lock your Part B stream (B1 or B2), revise it fully, and attempt Sample Paper 4 with both parts timed separately.
  • Week 4: Attempt Sample Paper 5 as a final full-length mock, then use the last 2 days only for light revision of formulas and DOF/kinematics shortcuts.

FAQs on GATE Robotics and Automation Sample Papers

Ques.Are there official previous year papers for GATE Robotics and Automation?

Ans.No, RA is a new paper introduced for GATE 2027, so no official previous year paper exists yet. These sample papers are built directly on the official RA syllabus instead.

Ques.How many questions and marks does the GATE RA paper carry?

Ans.The GATE RA paper carries 100 marks across 65 questions in a 180-minute computer based test, split into General Aptitude, Part A, and Part B.

Ques.Should I choose Part B1 Electrical or Part B2 Mechanical Engineering?

Ans.You should choose the Part B stream that matches your undergraduate background, since both carry the same 25 marks and similar difficulty.

Ques.Is there negative marking in the GATE Robotics and Automation paper?

Ans.Yes, one-third mark is deducted for a wrong 1-mark MCQ and two-thirds for a wrong 2-mark MCQ. There is no negative marking on NAT, MSQ, or unanswered questions.

Ques.Which topics carry the highest weightage in GATE RA sample papers?

Ans.Principles of Robotics and Automation carries the highest weightage, especially degrees of freedom, rotation matrices, and forward kinematics questions.

Ques.How should I use these sample papers if I am starting preparation late?

Ans.Focus first on Part A since it is compulsory and worth 60 marks, then attempt at least two full sample papers under exam timing before your chosen Part B revision.